air pump BMW 645Ci COUPE 2004 E63 N62B44 Engine User Guide

Downloaded from www.Manualslib.com manuals search engine 44
N62 Engine
Transmission Oil/Coolant Heat Exchanger
The transmission oil/coolant heat exchanger ensures that the transmission oil is heated up
quickly and also that it is appropriately cooled. When the engine is cold, the transmission
oil/coolant heat exchanger thermostat switches into the engine's recirculated coolant cir-
cuit. This allows the transmission oil to heat up as quickly as possible (with the engine
coolant).
When the return flow water temperature reaches 82 ºC, the thermostat switches the trans-
mission oil/coolant heat exchanger to the low-temperature coolant radiator circuit (refer to
the cooling circuit diagram) to cool the transmission oil.
Electrically Operated Fan
The electric fan is integrated in the cooling module and is mounted directly in front of the
radiator. The speed is regulated by the ECM.
Viscous Coupling Fan
The viscous coupling fan is driven by the water pump. The noise output and the perfor-
mance of the fan coupling and the fan wheel have been optimized as compared with the
E38M62. The viscous coupling fan is used as the final level of cooling and switches on at
an air temperature of 92 ºC.
N No
ot
te
es
s:
:

Downloaded from www.Manualslib.com manuals search engine 49
N62 Engine
N No
ot
te
e:
:
T
Th
he
e
o
oi
il
l
c
ch
he
ec
ck
k
v
va
al
lv
ve
es
s
a
ar
re
e
d
di
if
ff
fe
er
re
en
nt
t
i
in
n
d
de
es
si
ig
gn
n
a
an
nd
d
s
sh
ho
ou
ul
ld
d
n no
ot
t
b
be
e
m
mi
ix
xe
ed
d
u
up
p
o
on
n
i
in
ns
st
ta
al
ll
la
at
ti
io
on
n.
.
Oil Pressure Switch
The oil pressure switch is located on the side in the bank 1-4 cylinder head.
Oil Pump
The oil pump is mounted at an angle to the crankshaft bearing cap and is driven by the
crankshaft using a roller chain. The oil pump is a two-stage gear oil pump with two paral-
lel switched gear clusters.
The two pair of gear clusters are stacked one
behind the other and work in two stages.
Stage two (both pump supply circuits) is only
active in the lower engine speed range up to
approx. 2,000 rpm to provide sufficient oil pres-
sure for the VANOS at high oil temperatures.
Stage two is deactivated hydraulically at a pres-
sure of 2 bar.
42-02-73
42-02-75
42-02-76 Oil Pump
1. Drive Shaft
2. Mounting Points
3. Oil Filter
4. Pressure Relief Valve (over 15 Bar)
5. Control Valve (Pump Stage/Pressure Control)
6. Oil supply from the oil pump to the engine
7. Oil pressure control tube from the engine to
the control valve.