oil level BMW 7 SERIES 2008 E65 Service and warranty information
[x] Cancel search | Manufacturer: BMW, Model Year: 2008, Model line: 7 SERIES, Model: BMW 7 SERIES 2008 E65Pages: 54, PDF Size: 2.07 MB
Page 8 of 54
All 2008 model year 7 Series vehicles are facto-
ry-filled with BMW High Performance Synthetic
oils. At the time of the printing of this booklet,
the following oils are strongly recommended
and approved by BMW:
BMW High Performance 5W-30 Synthetic Oil
(BMW part number 07 51 0 017 866)
Mobil 1 5W-30
Mobil 1 5W-40
BMW is evaluating various synthetic oils for
inclusion in our list of recommended engine oils.
For the most current list of synthetic oils, please
contact your BMW center, or call BMW of North
America, LLC at 1 800 831-1117. You can also
obtain this information from our website,
www.bmwusa.com/.
BMW recommends that you check your engine
oil level whenever you add fuel to your vehicle. If
you need to add oil between oil changes and
are unable to obtain BMW High Performance
Synthetic Oil, Mobil 1 or another special oil on
the list, use a synthetic oil with an API rating of
SH or higher.
The following maintenance elements must be
performed at the mileage/time stated (time
intervals begin from the vehicles production
date):
Brake Fluid Service: Change brake fluid every
two years, or when specified by CBS.
Oxygen Sensor Service: The oxygen sensor
deteriorates strictly on a mileage basis and
must therefore be replaced every
120,000 miles to maximize vehicle fuel econ-
omy and minimize exhaust pollution.
Spark Plug Service: Replace at
100,000 miles, or when specified by CBS.
The engine coolant has a lifetime rating and
does not need to be changed. For your convenience, you may also wish to
have your BMW center perform any necessary
operations to fulfill any state inspection require-
ments in your area concurrent with the mainte-
nance elements specified above during other
repairs.
Should you request more frequent
maintenance service, the cost of these ser-
vices will not be covered by the Maintenance
Program.
BMW has applied the most modern technologi-
cal advances not only to the design and produc-
tion of your vehicle, but also to computing of the
optimum maintenance interval for your type of
operations and driving style. Your BMW center
has made a substantial investment in unique
BMW special service tools to enable BMW fac-
tory trained service technicians to perform qual-
ity repairs on your BMW in minimal time. Your
service technician looks forward to serving your
every service need and to help maximize your
satisfaction with your BMW, its longevity, and
resale value.
Quality Certification I
For a detailed list of items inspected, refer to the
Quality Certification I form provided to the
Owner at time of delivery. A copy of the form is
on file at the selling BMW center.
Maintenance summary
The Condition Based Service (CBS) system will
determine the requirement for performance of
the maintenance services described on this and
the following page. These services may be
required either individually or in conjunction with
other maintenance services.
4
Page 9 of 54
Standard operations
Maintenance work:
Brief diagnostic test
Verify Check Control messages
Check indicator and warning lights
Reset CBS display
Engine oil
Maintenance work:
Change the engine oil and oil filter. We rec-
ommend BMW High Performance 5W-30
Synthetic Oil P/N 07 51 0 017 866.
After every 3rd engine oil change: Intake air
cleaner: replace air filter element (reduce
replacement interval in dusty operating
conditions).
Parking brake: check function
Microfilter
Maintenance work:
Automatic air conditioning: Replace microfilter
Front brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact
points in calipers.
Brake discs: Check surface and thickness, if
necessary replace at extra charge.*
Parking brake: Check condition, brake lining
thickness and function, if necessary replace
at extra charge.*
*Unless covered by Maintenance Program
Vehicle Check
Maintenance work:
Check operation of horn, headlight flasher
and hazard warning flashers.
Check instrument and control lighting and
heater/air-conditioning blower.
Check lighting system: turn signals, back-up,
license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area
lights.
Safety belts: check condition and function.
Check windshield wiper and washer jet
positions.
Body: check for corrosion (except cavities).
Tires: check tread depth, wear pattern, outer
condition, inflation pressure (also spare tire). If
necessary, correct pressure (also spare).
Reset tire pressure monitor.
Battery: check state of charge (magic eye)
and charge if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn
covers, obvious damage or attachment of
stickers.
Rear-view mirrors
Coolant: check fluid level and concentration.
Windshield washer and intensive cleaning
system: check protection level, fluid level, top
if necessary.
Brake system connections and lines: check
for leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e. transmis-
sion, rear axle, fuel lines, exhaust system),
check for damage, leaks and corrosion.
Steering components: check for clearance,
leaks, damage and wear.
Final Inspection: Road test with check of
–Brakes
– Steering
– Shock absorbers (visual)
– Gearbox
5