LED BMW IX 2022 Owners Manual

Overview
The memory buttons are located on the front
doors.
Storing settings
1.Set the desired position.2.
Press the button. The LED lights up.
3.Press the desired button 1 or 2 while the
LED is illuminated. A signal sounds.
Go to Settings
Press the desired button 1 or 2.
Infotainment
Entertainment Buttons and functions
Depending on the country and equipment ver

celed, for instance due to background noise orconversations in the vehicle.1."MENU"2."Vehicle apps"3."System settings"4."Personal Assistant (BMW)"5."Speaking during voice output"
Online speech processing
Online speech processing improves the quality
of the speech recognition and search results for points of interest. To use the functions,
data is transmitted to a service provider via an
encrypted connection and stored locally there. An active ConnectedDrive contract is required
for online voice processing. ConnectedDrive is
available depending on the national

Loss of vehicle keys
A lost vehicle key can be disabled and re

Valet parking mode
Principle
In the valet parking mode, the Control Display
is disabled.
E.g., this mode can be used when the vehicle is handed over for valet parking.
General information
Depending on the national

Electric steering wheel adjustment
General information The steering wheel adjustment is stored in the
active BMW ID or in the active driver profile. If
the BMW ID or the driver profile is reactivated
at a later time, the stored position is called up
automatically.
The current steering wheel position can be stored using the memory function.
To make it easier to enter and get out of the
vehicle, the steering wheel moves temporarily into the upper position.
Adjusting the steering wheel position
Press the switch to adjust the forward/backposition and height of the steering wheel to the
seat position.
Turning the steering wheel heating
on/off
1."CLIMATE MENU" tap in the center of the climate control bar.2. steering wheel heating.3.Select the desired setting.
Memory function
Principle
The following settings can be stored and, if
necessary, retrieved using the memory func

Storing settings1.Set the desired position.2.
Press the button. The LED lights up.
3.Press the desired button 1 or 2 while the
LED is lit. A signal sounds.
Go to Settings
Press the desired button 1 or 2.
The stored position is called up.
The procedure stops when a seat setting
switch or one of the memory buttons is pressed again.
The adjustment of the seat position on the
driver

OverviewButton in the vehicle
Parking brake
Setting the parking brake
With a stationary vehicle Press the button.
The LED lights up.
The indicator light in the instrument cluster illuminates red.
The parking brake is engaged and
transmission lock is engaged.
While driving
Using while driving serves as an emergency
braking function.
Press and hold this button. The vehicle
brakes hard as long as the button is
pressed.
The indicator light in the instrument
cluster illuminates red, a signal sounds,
and the brake lights illuminate.
A Check Control message is displayed.
The parking brake is engaged and the trans

message and the meaning of the indicator/
warning lights.
Supplementary text messages Additional information, such as the cause of a
fault or the required action, can be called up
via Check Control.
With urgent text messages, the added text will
be automatically displayed on the control dis

Displays on the steering wheel
The two LED lights above the buttons illumi

Display
Your own lane is displayed for easier driving
into a car wash.
Panorama View
Principle The panoramic view gives you an earlier viewof crossing traffic at blind driveway exits and
intersections.
General information
Road users concealed by obstacles to the left
and right of the vehicle can only be detected relatively late from the driver