tor BMW IX 2022 User Guide

Storing settings1.Set the desired position.2.
Press the button. The LED lights up.
3.Press the desired button 1 or 2 while the
LED is lit. A signal sounds.
Go to Settings
Press the desired button 1 or 2.
The stored position is called up.
The procedure stops when a seat setting
switch or one of the memory buttons is pressed again.
The adjustment of the seat position on the
driver

Parking position PSelector lever position for parking the vehicle.
In selector lever position P, the drivetrain is blocked and the parking brake is engaged.
Selector lever position P is engaged automati

Engaging selector lever position P
Press the button.
When stopping the vehicle
Selector lever position D or R At inclines, the system prevents rolling backagainst the set driving direction and provides
drive

An appropriate Check Control message is
displayed.
Position N is indicated on the selector lever.4.Maneuver the vehicle from the hazardous area and secure it against rolling away.
Turning off drive

Deceleration and recuperative
braking
Deceleration
The degree of the deceleration depends on the
selector lever position, the energy recovery setting and the driving situation.
Depending on the degree of the deceleration, the brake lights will come on without steppingon the brake pedal.
The deceleration very fast in selector lever po

OverviewButton in the vehicle
Parking brake
Setting the parking brake
With a stationary vehicle Press the button.
The LED lights up.
The indicator light in the instrument cluster illuminates red.
The parking brake is engaged and
transmission lock is engaged.
While driving
Using while driving serves as an emergency
braking function.
Press and hold this button. The vehicle
brakes hard as long as the button is
pressed.
The indicator light in the instrument
cluster illuminates red, a signal sounds,
and the brake lights illuminate.
A Check Control message is displayed.
The parking brake is engaged and the trans

NOTICE
The wiper blades can wear out or become
damaged prematurely when wiping on a dry
window for a longer period of time. The wiper
motor can overheat. There is a risk of dam

Forward Collision Mitigation: person
detected
Indicator light illuminates: risk of colli

message and the meaning of the indicator/
warning lights.
Supplementary text messages Additional information, such as the cause of a
fault or the required action, can be called up
via Check Control.
With urgent text messages, the added text will
be automatically displayed on the control dis

Occupancy detection
The occupancy detection meets the statutory
requirements of the Federal Motor Vehicle Safety Standard FMVSS 208 and deactivates
the passenger airbags under certain condi