brake BMW IX 2022 Owners Manual

7Exterior mirror adjustment button8Door emergency unlocking9Cargo area
Switch console
1Start/Stop button2Controller3My Modes4Assistance systems5Parking brake, Automatic Hold6Selector lever
BMW iDrivePrinciple
BMW iDrive is the vehicle

Parking position PSelector lever position for parking the vehicle.
In selector lever position P, the drivetrain is blocked and the parking brake is engaged.
Selector lever position P is engaged automati

Deceleration and recuperative
braking
Deceleration
The degree of the deceleration depends on the
selector lever position, the energy recovery setting and the driving situation.
Depending on the degree of the deceleration, the brake lights will come on without steppingon the brake pedal.
The deceleration very fast in selector lever po

OverviewButton in the vehicle
Parking brake
Setting the parking brake
With a stationary vehicle Press the button.
The LED lights up.
The indicator light in the instrument cluster illuminates red.
The parking brake is engaged and
transmission lock is engaged.
While driving
Using while driving serves as an emergency
braking function.
Press and hold this button. The vehicle
brakes hard as long as the button is
pressed.
The indicator light in the instrument
cluster illuminates red, a signal sounds,
and the brake lights illuminate.
A Check Control message is displayed.
The parking brake is engaged and the trans

Using the parking brake via iDriveThe parking brake can also be engaged or dis

If the vehicle is being held by Automatic Hold,press additionally on the brake pedal, when
switching off.
Turn signal
Turn signal in exterior mirror When driving and during operation of the turn
signals or hazard warning system, do not fold
in the exterior mirrors, so that the turn signal
lamps on the exterior mirror are easy to see.
Blinking
Press the lever past the resistance point.
Triple turn signal activation
Lightly tap the lever up or down.
The triple turn signal duration can be adjusted.
1."MENU"2."Vehicle apps"3."Exterior lighting"4.If necessary, "Additional settings"5."One

Harder vehicle deceleration
In certain situations, it can be necessary to
bring the vehicle to a halt more quickly than with automatic brake actuation.
To do this, quickly apply extra force to the
brake. For a brief period, the brake pressure
will be higher than the brake pressure that is
achieved by the automatic braking function.
Automatic brake actuation is interrupted.
Canceling automatic braking
It can be necessary to interrupt automatic braking in certain situations, for instance for anevasive maneuver.
Canceling automatic braking:

The heat generated during braking dries brakedisks and brake pads and protects themagainst corrosion.
In this way the brake force will be available when you need it.
Hills General informationThe braking effect of the drivetrain can be in

Warning
Mounted steel wheels can cause technical
problems, for instance unexpected loosening of the lug bolts and damage to the brakedisks. There is a risk of accident. Do not
mount steel wheels.
Warning
Incorrect wheel/tire combinations will impair
the vehicle

After washing the vehicle
After washing the vehicle, apply the brakes briefly to dry them; otherwise, braking effect
can be reduced. The heat generated during
braking dries brake disks and brake pads and
protects them against corrosion.
Completely remove all residues on the win