rear view mirror BMW M3 CONVERTIBLE 2012 Owners Manual

51
Adjustments
Controls
Automatic heating
Depending on the outside temperature, both
exterior mirrors are heated automatically when
the engine is running or the ignition is switched
on.
Passenger side
mirror tilt function –
automatic curb monitor
Activating
1. Push the switch to the position for the
driver's side mirror, arrow 1.
2. Shift into reverse or engage the selector
lever- or transmission position R.
The glass of the mirror on the passenger
side tilts slightly down. This allows the
driver to see the area immediately adjacent
to the vehicle, e.g. a curb, when backing into
a parking space.
Deactivating
Push the switch to the position for the passen-
ger side mirror, arrow 2.
Interior rearview mirror
Turn the knob to reduce glare from the head-
lamps of cars behind yo u when driving at night.
Interior and exterior mirrors,
automatic dimming feature
The automatic dimming feature of the interior
and exterior mirrors is controlled by two photo
cells in the interior rearview mirror. One photo
cell is in the mirror frame, see arrow; the other is
on the back of the mirror.
In order to ensure that the system functions
correctly, keep the photo cells clean, do not
cover the area between the interior rearview
mirror and windshield, an d do not affix adhesive
labels or stickers of an y kind to the windshield
directly in front of the mirror.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

68
ControlsDriving
Wiper system
1Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or
rain sensor
4 Cleaning windshield and headlamps
5 Setting speed for interm ittent wipe or sen-
sitivity of the rain sensor
Switching on wipers
Press the lever upward, arrow 1.
The lever automatically retu rns to its initial posi-
tion when released.
Normal wiper speed
Press once.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.
Fast wiper speed
Press twice or press beyond the resistance
point.
The system switches to normal speed when the
vehicle is stationary.
Intermittent wipe or rain sensor
If the car is not equipped with a rain sensor, the
intermittent-wipe time is a preset.
If the car is equipped with a rain sensor, the time
between wipes is contro lled automatically and
depends on the intensity of the rainfall. The rain
sensor is mounted on the windshield, directly in
front of the interior rearview mirror.
Activating intermittent wipe or rain
sensor
Press the button, arrow 3. The LED in the but-
ton lights up.
Setting speed for intermittent wipe or
sensitivity of the rain sensor
Turn thumbwheel 5 up or down.
Deactivating intermit tent wipe or rain
sensor
Press the button again, arrow 3.
The LED goes out.
Deactivate the rain sensor before enter-
ing an automatic car wash. Failure to do
so could result in damage caused by undesired
wiper activation. <
Cleaning windshield and headlamps
Pull the lever, arrow 4.
Washer fluid is sprayed onto the windshield and
the wipers are operated for a short time.
When the vehicle lighting system is switched
on, the headlamps are cleaned at regular and
appropriate intervals. Do not use the washers if there is any
danger that the flui d will freeze on the
windshield. If you do, your vision could be
obscured. Antifreeze should therefore be
added to the fluid, refer to Washer fluid.
Do not use the washers when the washer fluid
reservoir is empty; othe rwise, you will damage
the washer pump. <
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

100
ControlsTechnology for driving comfort and safety
Automatic deactivation of the front
passenger airbags
An analysis of the impression in the front pas-
senger seat cushion determines whether and
how the seat is occupied. The front and side air-
bags for the front pass enger are activated or
deactivated by the system accordingly.
The indicator lamp above the interior
rearview mirror shows the current status
of the front passenger airbags, deactivated or
activated, refer to Status of front passenger air-
bags below. <
Before transporting a child on the front
passenger seat, read the safety precau-
tions and handling inst ructions under Trans-
porting children safely, refer to page 53.
The front and side airbags can also be deacti-
vated by adolescents and adults sitting in cer-
tain positions; the indi cator lamp for the front
passenger airbags lights up. In such cases, the
passenger should change his or her sitting
position so that the fr ont passenger airbags are
activated and the indicator lamp goes out. If the
desired airbag status cannot be achieved by
changing the sitting position, transport the rele-
vant passenger on a rear seat. Do not attach
seat covers, seat cushion padding, ball mats or
other items to the front passenger seat unless
they are specifically recommended by BMW.
Do not place any items under the seat which
could press against the seat from below. Other-
wise, a correct analysis of the seat cushion is
not ensured. <
Status of front passenger airbags
The indicator lamp for the front passenger air-
bags shows the functional status of the front
passenger front and side airbags in accordance
with whether and how the front passenger seat
is occupied. The indicator lamp shows whether
the front passenger airbags are activated or
deactivated.
>The indicator lamp light s up when a child in
a specially designated child restraint sys-
tem is detected, as in tended, on the seat.
The front and side airbags for the front pas-
senger are not activated.
Most child seats are detected by the
system, This partic ularly applies to
child seats that were required by NHTSA at
the time of manufacture of the vehicle. After
mounting a child seat, ensure that the indi-
cator lamp for the fron t passenger airbag is
lit. It indicates that th e child seat has been
detected and that the front passenger air-
bags are deactivated. <
> The indicator lamp does not light up as long
as a person of sufficient size and in a correct
sitting position is detected on the seat.
The front and side airbags for the front pas-
senger are activated.
> The indicator lamp does not light up if the
seat is empty.
The front and side airbags for the front pas-
senger are not activated.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

106
ControlsLamps
Switching off
Press the lever in the o pposite direction to the
pressure point, arrow 3.
High-beam Assistant
The concept
This system automatica lly switches the high
beams on and off. The procedure is controlled
by a sensor on the front of the interior rearview
mirror. The assistant ensures that the high
beams are switched on whenever the traffic sit-
uation allows. It handle s this task for you and
gives you the benefit of the best possible view.
You can intervene at any time and switch the
high beams on and off as usual.
Activating the system
1. Turn the light switch to position 3, refer to
page 103.
2. With the low beams switched on, briefly
push the turn signal/high beam lever in the
direction of the high beam.
The indicator lamp in the instrument
cluster lights up when the high beams
are activated. The system automati-
cally switches from hi gh beams to low beams
and vice versa in response to oncoming traffic,
traffic ahead of you, and adequate ambient
lighting, e.g. on city streets.
Switching the high beams on and off
manually
Whenever you wish, or when the situation
requires, you can intervene:
> If the High-beam Assistant switches on the
high beams, but you wo uld like to drive with
the low beams, simply switch off the high
beams using the turn signal/high beam
lever. This deactivates the High-beam
Assistant.
To reactivate the system, briefly push the
turn signal/high beam lever toward the high
beams again. >
If the High-beam Assistant switches on the
low beams, but you would like to drive with
the high beams, switch on the high beams
as usual. This deactivates the system and
the high beams need to be switched off
manually, if necessary.
To reactivate the system, briefly push the
turn signal/high beam lever toward the high
beams again.
> Use the headlamp flashe r as usual with the
low beams switched on.
System limitations
The High-beam Assistant cannot serve
as a substitute for the driver's personal
judgment of when to use the high beams.
Therefore, manually switch off the high beams
in situations where this is required to avoid a
safety risk. <
The system is not fully fu nctional in situations
such as the following, and driver intervention
may be necessary:
> In very unfa vorable weather conditions,
such as fog or heavy precipitation
> In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; and at animal crossings
> In tight curves, on hilltops or in depressions,
in cross traffic or half-obscured oncoming
traffic on highways
> In poorly lit towns and cities and in the pres-
ence of highly reflective signs
> At low speeds
> When the windshield in front of the interior
rearview mirror is fogged over, dirty or cov-
ered with stickers, etc.
> If the sensor is dirty. Clean the sensor on
the front of the interior rearview mirror using
a cloth moistened with a small amount of
glass cleaner.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

116
ControlsPractical interior accessories
Practical interior accessories
Vehicle equipment
In this chapter, all pr oduction, country, and
optional equipment that is offered in the model
range is described. For this reason, descrip-
tions will be given of some equipment that may
not be available in a vehi cle, for example due to
the special options or national-market version
selected. This also app lies to safety related
functions and systems.
Integrated universal remote
control
The concept
The Integrated universal remote control can be
used to operate up to 3 functions of remote-
controlled devices such as garage door open-
ers or lighting systems. The Integrated univer-
sal remote control thus replaces as many as
three different hand-held transmitters. To oper-
ate them, the buttons on the interior rearview
mirror must be programmed with the desired
functions. Programming requires the hand-held
transmitter for the respective device.
To prevent possible damage or injury,
before programming or using the inte-
grated universal remote control to operate a
device, always inspect the immediate area to
make certain that no people, animals or objects
are within the pivoting or travel range of the
device being operated.
Also follow the safety in structions supplied with
the hand-held transmitter. <
For security reasons, ma ke sure to delete the
stored functions before selling the vehicle, refer
to page 118.
Compatibility
If this symbol appears on the package
or in the instructions supplied with the
device to be operated, you can gener-
ally assume that the devi ce is compatible with
the Integrated univer sal remote control.
For additional questions, please consult:
> Your BMW center.
> www.homelink.com on the Internet.
HomeLink is a registered trademark of Johnson
Controls, Inc.
Controls on the interior rearview mirror
1 LED
2 Buttons
3 Hand-held transmitter, required for pro-
gramming.
Programming
General information
1.Switch on the ignition.
2. Initial operation:
Simultaneously hold down the right and left
buttons on the inside mirror for approx.
20 seconds until the LED on the inside mir-
ror flashes.
All programs of the bu ttons on the rearview
mirror are deleted.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

212
MobilityReplacing components
When mounting new tires or changing over
from summer to winter tires and vice versa,
mount run-flat tires for your own safety. In the
event of a flat, no spare wheel is available. Your
BMW center will be glad to advise you. Refer
also to New wheels and tires, page 195.
The tools for changing wheels are avail-
able as optional accessories from your
BMW center. <
Jack mounting points
The jacking points are at the positions shown in
the illustration.
Vehicle battery
Battery care
The battery is 100 % maintenance-free, the
electrolyte will last for the life of the battery
when the vehicle is operated in a temperate cli-
mate. Your BMW center will be glad to advise in
all matters concerning the battery.
Battery replacing
Only use vehicle batteries that have been
approved for your vehicle by the manu-
facturer; otherwise, the vehicle could be dam-
aged and systems or functions may not be fully
available. <
After a battery replacem ent, have the battery
registered on the vehicle by your service center
to ensure that all comfort functions are fully
available.
Charging the battery
Note
Do not connect battery chargers to the
sockets built into the vehicle at the plant;
doing so may dama ge the vehicle.<
Jump-starting terminals
Only charge the battery in the vehicle via the
terminals in the engine compartment with the
engine off. Connections, refer to Jump-starting
on page216.
Power failure
After a temporary power lo ss, the functioning of
some equipment may be limited and require
reinitialization. Individual settings may likewise
have been lost and will have to be programmed:
> Time and date
These values must be updated, refer to
page 86.
> Radio
In some cases, statio ns may have to be
stored again, refer to page 144.
> Glass roof
It may happen that the roof can only be
tilted. The system must be initialized.
Please contact your BMW center.
> Seat and mirror memory
The positions must be stored again, refer to
page 48.
> Inside rearview mirror with digital compass
The system must be calibrated, refer to
page 119.
> Active steering
The system automatically initializes itself
briefly during a trip. The system is deacti-
vated during this time, refer to page 97.
> xDrive
The system automatically initializes itself
during a trip. Indicator lamps light up during
this time. If the lamps do not go out during
the current trip, have the system checked.
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

231
Indicator and warning lamps
Mobility
Park Distance Control faile
d Have the system checked.
> High-beam Assistant inactive Clean the sensor field on the front of the
interior rearview mirror, refer to
page 106.
> High-beam Assistant malfunction-
ing Have the system checked by the near-
est BMW center.
> Sensitivity of the High-beam Assis-
tant has been changed There is a risk that oncoming traffic may
be blinded. Have the system checked
by the nearest BMW center.
Bulb of exterior lighting system failed Have the exterior lighting checked as soon as possible.
Low-beam headlamp or fo g lamp failed Have the low beams checked as soon
as possible.
High-beam headlamp failed Hav e the high-beam headlamps
checked.
Adaptive Light Control failed
Coolant level too low Add coolant immediately, refer to page200.
Engine oil pressure too low Stop immediately and switch off the
engine. You cannot co ntinue your jour-
ney. Contact your BMW center.
Engine oil level too low Add engi ne oil immediately; refer to
page 198 for more information.
Lights up in red:
Service appointment overdue Arr ange a service appointment.
Check service requirements, refer to
page 84.
Lights up in yellow:
Service due Arrange a service appointment.
Check service requirements, refer to
page 84.
No service due Check servic e requirements, refer to
page 84.
Time and date no longer correct Set the time and date, refer to page86.
12Cause What to do
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

246
ReferenceEverything from A to Z
Head Light, refer to Adaptive
Light Control 105
Head restraints 45
– rear, removing 46
– sitting safely 42
Heated
– mirrors 51
– rear window 111,114
– seats 48
– steering wheel 52
Heating 109
– mirrors 51
– rear window 111,114
– seats 48
– steering wheel 52
Heating and ventilation, refer
to Climate 109
Heavy loads, refer to Stowing cargo 136
Height, refer to Dimensions 235
Height adjustment
– seats 43
– steering wheel 52
High-beam Assistant 106
High beams 105
– headlamp flasher 105
– indicator lamp 220
High beams and low beams, automatic, refer to High-
beam Assistant 106
High-pressure washer 204,205
High water, refer to Driving
through water 134
Hill Descent Control HDC 92
Hills 135
Holders for cups 121
Homepage BMW 4
Hood 198
Hooks for shopping bags 125
Horn 10,11
Hotel function, refer to
Locking or unlocking
separately 31 Hot exhaust system
134
Hydraulic brake assist, refer to
Dynamic Brake Control 90
Hydroplaning 134
I
Ice warning, refer to Outside
temperature warning 78
Identification marks
– Run-flat tires 196
– tire coding 193
Ignition 58
– switched off 58
– switched on 58
Ignition key, refer to Remote
control with integrated
key 24
Ignition key position 1, refer to
Radio readiness 57
Ignition key position 2, refer to Ignition on 58
Ignition lock 57
Imprint 2
Indicator and warning
lamps 13
– Tire Pressure Monitor TPM 96
Indicator and warning lamps, overview 220
Individual air distribution 110
Inflation pressure, refer to Tire inflation pressure 177
Inflation pressure monitoring,
refer to Tire Pressure
Monitor TPM 95
Initializing
– after power failure 212
– compass, refer to Calibrating 119
– Flat Tire Monitor FTM 93
– glass roof 37
Installation location
– CD changer 148
– telephone 120 Instrument cluster
12
Instrument cluster, refer to
Cockpit 10
Instrument combination, refer to Instrument cluster 12
Instrument lighting 107
Integrated key 24
Integrated universal remote
control 116
Interior lamps 107
– remote control 27
Interior motion sensor 33
Interior rearview mirror 51
– automatic dimming
feature 51
– compass 118
Interlock, refer to Disengaging the remote control 60
Intermittent mode of the
wipers 68
J
Jacking points 212
Jumpering, refer to Jump-
starting 216
Jump-starting 216
K
Key, refer to Integrated key/
remote control 24
Keyless go, refer to Comfort Access 33
Keyless opening and closing, refer to Comfort Access 33
Key Memory, refer to Personal
Profile 24
Keypad dialing 162
Kickdown 61
– automatic transmission with Steptronic 61
Knock control 175
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

247
Everything from A to Z
Reference
L
Lamps
– automatic headlamp
control 103
– parking lamps/low beams 103
Lamps and bulbs, replacing
bulbs 208
Lap-and-shoulder belt, refer to Safety belts 49
Lashing eyes, refer to Securing cargo 137
LATCH child restraint fixing
system 54
Launch Control 66
Leather care 206
LED Light-emitting diodes 209
Length, refer to Dimensions 235
License plate lamp, replacing
bulb 211
Light
– high-beam assistant 106
Light-alloy wheels 206
Light-emitting diodes LED 209
Lighter 122
– connecting electrical appliances 123
Lighting
– instruments 107
– lamps and bulbs 208
– vehicle, refer to Lamps 103
Light switch 103
Listening to scan samples
– BMW Professional radio 144
Load 136
Load securing equipment,
refer to Securing cargo 137
Lock buttons, doors, refer to Locking 30 Locking
– adjusting confirmation
signal 27
– from inside 30
– from outside 26
– without remote control, refer to Comfort Access 33
Locking and unlocking doors
– confirmation signals 27
– from inside 29
– from outside 25
Low beam control, refer to High-beam Assistant 106
Low-beam headlamps 103
– automatic 103
– indicator lamp, defective
bulb 231
Lower back support, refer to Lumbar support 44
Luggage rack, refer to Roof- mounted luggage rack 137
Lumbar support 44
M
M+S tires, refer to Winter
tires 196
Maintenance, re fer to Service
and Warranty Information
Booklet for US models or in
the Warranty and Service
Guide Booklet for Canadian
models
Maintenance system 202
Malfunction
– automatic transmission with Steptronic 62
– tires 94
Malfunction warnings, refer to Check Control 87
Manual air distribution 110
Manual car wash 205
Manually unlocking parking
lock 65 Manual mode, automatic
transmission with
Steptronic 61
Manual operation
– door lock 29
– driver's door 29
– fuel filler flap 174
– glass roof 37
– parking lock 65
– parking lock, automatic transmission 62
Manual station search 144
Manual transmission 60
Master key, refer to Remote
control with integrated
key 24
Maximum cooling 113
Maximum speed
– with winter tires 196
Measurements, refer to Dimensions 235
Memory, refer to Seat and
mirror memory 48
Microfilter
– BMW Maintenance
System 202
– for air conditioner 111
– for automatic climate
control 115
Microfilter/activated-charcoal filter
– BMW Maintenance System 202
Microphone
– telephone 14
Mirror dimming feature 51
Mirrors 50
– automatic curb monitor 51
– exterior mirrors 50
– heating 51
– interior rearview mirror 51
– memory, refer to Seat and mirror memory 48
Mirrors, folding in before entering a car wash 50
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG

249
Everything from A to Z
Reference
Providing medical assistance,
refer to First aid pouch 215
PTY 145
Puncture
– Flat Tire Monitor 93
R
Radio18
– autostore 144
– controls 18
– refer to separate Owner's Manual
– switching on/off 18
– volume 18
Radio, refer to BMW
Professional radio 144
Radio position, refer to Radio readiness 57
Radio readiness 57
– switched off 58
– switched on 57
Radio-remote key, refer to Remote control with
integrated key 24
Rain sensor 68
RDS 145
Reading lamps 108
Rear lamps, refer to Tail lamps 210
Rear seats
– adjusting head restraints 46
– folding down backrests 123
Rear ventilation 115
Rearview mirror, refer to Mirrors 50
Rear window
defroster 111,114
Rear window rolle r blind, refer
to Roller sunblinds 120
Reception
– radio station 144
Recirculated air
mode 110,113
Recirculation of air, refer to Recirculated air
mode 110,113 Reclining seat, refer to
Backrest 43
Refueling 174
Releasing
– hood 198
Remaining distance, refer to Cruising range 80
Remote control 24
– battery renewal 35
– Comfort Access 33
– garage door opener 116
– malfunction 28,35
– removing from the ignition lock 57
– service data 202
– trunk lid 27
Replacement fuses, refer to Fuses 213
Replacement remote
co
ntrol 24
Replacing bulbs, refer to Lamps and bulbs 208
Replacing tires 195
Replacing tires, refer to New wheels and tires 195
Reporting safety defects 7
Reserve warning, refer to Fuel gauge 79
Reset, resetting tone settings 144
Restraint systems
– for children 53
– refer to Safety belts 49
Retractable hardtop 38
– care, refer to Caring for your vehicle brochure
– convenient opening and
closing 26
– remote control 26
Reverse
– CD 148
Reverse gear 63
– automatic transmission with
Steptronic 61
– manual transmission 60
Roadside
Assistance 169,215 Roadside parking lamps
105
– replacing bulbs 209
Roadworthiness test, refer to Service requirements 84
Roller sunblinds 120
Rollover protection system, Convertible 101
– resetting 101
Roof load capacity 237
Roof-mounted luggage rack 137
Rope, refer to Tow-starting, towing away 218
RSC Runflat System
Component, refer to Run-
flat tires 196
Runflat System Component RSC, refer to Run-flat
tires 196
Run-flat tires 196
– continuing driving with a damaged tire 94
– flat tire 94
– Flat Tire Monitor 94
– inflation pressure 177
– new tires 195
– tire replacement 195
– winter tires 196
Runflat tyres, refer to Run-flat tires 196
S
Safety-belt height
adjustment 49
Safety belts 49
– belt hand-over 49
– damage 49
– indicator/warning lamp 49
– reminder 49
– sitting safely 42
Online Edition for Part no. 01 40 2 609 312 - \251 08/11 BMW AG