keyless BMW MOTORRAD C 400 X 2021 Livret de bord (in French)

Certifications
BMW Keyless Ride ID Device
USA, Canada:
Product na
me: BMW
Keyless Ride ID
Device FCC ID: YGOHUF5750
IC: 4008C -HUF5750
Canada:
Operation
is subject to t
he following two conditions:
(1 )
This
d evice

may not cause harmful
interference,
and
(2) this d
evice must accept any interference received, including
interference that may cause undesired operation. Any chang
es
or modifications
not expressly approv
ed by the
party responsible
for
compliance could void the user’s

authority to operate the equipment.

Declaration Of
Conformity
We declare under our responsibility that the product
BMW Keyless
Ride ID Device (Mo del: HUF5750)
camplies
with the appropriate essential requirements of the article 3
of the R&TIE and the other relevant provisions, when used for its
intended purpose. Applied Standards:
1. Health
and safety requirements contained in article 3 (1) a)
• EN 60950-1:2006+A11:2009+A1:2010+A12:2011;
Information technology equipment-S afety
2. Protection requirements
with respect to electromagnetic
compatibility article 3 (1) b)
• EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic
compatibility and radio spectrum matters (ERM);
Electromagnetic compatibility (EMC) standard for radio
equipment and services;
Part
1: Common technical requirements
• EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic
compatibility and radio spectrum matters (ERM);
Electromagnetic compatibility (EMC) standard for radio
equipment and services; Part 3: Specific conditions for short
range devices (SRD) operating on frequencies between 9 kHz
and 40 GHz
3. Means of the efficient use
of the radio frequency spectrum
article 3 (2)
• EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic
compatibility an
d radio spectrum matters (ERM); Short range
devices (SRD); Radio equipment tobe used in the 25 MHz to
1
000 MHz frequency range with power Ieveis ranging up to
500 mW;
Part 1: Technical characteristics an
d test methods.
Part 2: Harmonized EN covering essential requirements under
article 3.2 ofthe R&TIE directive