ESP BMW MOTORRAD C 400 X 2021 Руководство по эксплуатации (in Russian)

United
States (USA)
Contains FCC ID:
ODE-MREWS5012
FCC §
15.19 Labelling
requirements
This device complies with part
15 of the FCC

Rules and Industry
Canada’s licence-exempt RSS
standard(s) . Operation is subject
to the following two conditions: (1)
this device may not cause
interference, and
(2) this device must accept any
interference r

eceived , including
interference that may cause
undesired operation
. FCC § 15.21 Information to user
Changes
or modifications not
expressly approved by the party
responsible for complianc

e could
void the user's authority to
operate the equipment.
RF Exposure Requirements To comply with FCC RF exposure
compliance requirements, the
device must be installed to
provide a separation distance of
at least 20 cm from all persons.
Canada
Contains IC:
10430A-MREWS5012
This device complies

with part 15
of t
he FCC Rules and Industry
Canad a license-exempt RSS
standard(s). Operation is subject to
the following two conditions: (1)
this device may not cause
interference, and
(

2) this device must accept any
interference
received , including
interference that
may cause
undesired operation. Le présent appareil est conforme
aux CNR d'Industrie Canada
applicables aux appareils radio
exe

mpts de licence. L'exploitation
est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas
produire de brouillage, et
(2) l'utilisateur de l'appareil doit
accepter tout brouillage
radioélectrique subi, même si le
brouillage est susceptible d'en
compromettre le fonctionnement.
Serbia Vietnam
A1109091120AF04A3

Certifications
BMW Keyless Ride ID Device
USA, Canada:
Product na
me: BMW
Keyless Ride ID
Device FCC ID: YGOHUF5750
IC: 4008C -HUF5750
Canada:
Operation
is subject to t
he following two conditions:
(1 )
This
d evice

may not cause harmful
interference,
and
(2) this d
evice must accept any interference received, including
interference that may cause undesired operation. Any chang
es
or modifications
not expressly approv
ed by the
party responsible
for
compliance could void the user’s

authority to operate the equipment.

Declaration Of
Conformity
We declare under our responsibility that the product
BMW Keyless
Ride ID Device (Mo del: HUF5750)
camplies
with the appropriate essential requirements of the article 3
of the R&TIE and the other relevant provisions, when used for its
intended purpose. Applied Standards:
1. Health
and safety requirements contained in article 3 (1) a)
• EN 60950-1:2006+A11:2009+A1:2010+A12:2011;
Information technology equipment-S afety
2. Protection requirements
with respect to electromagnetic
compatibility article 3 (1) b)
• EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic
compatibility and radio spectrum matters (ERM);
Electromagnetic compatibility (EMC) standard for radio
equipment and services;
Part
1: Common technical requirements
• EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic
compatibility and radio spectrum matters (ERM);
Electromagnetic compatibility (EMC) standard for radio
equipment and services; Part 3: Specific conditions for short
range devices (SRD) operating on frequencies between 9 kHz
and 40 GHz
3. Means of the efficient use
of the radio frequency spectrum
article 3 (2)
• EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic
compatibility an
d radio spectrum matters (ERM); Short range
devices (SRD); Radio equipment tobe used in the 25 MHz to
1
000 MHz frequency range with power Ieveis ranging up to
500 mW;
Part 1: Technical characteristics an
d test methods.
Part 2: Harmonized EN covering essential requirements under
article 3.2 ofthe R&TIE directive