ECU BMW MOTORRAD F 650 CS 2003 Rider's Manual (in English)

111
15
General information and controls
Softbag
Softbag for stowage
compartment, inserting/
securing
e Attention:
Max. load in stowage compart-
ment 5 kg (approx. 11 lbs)
Make sure the softbag is cor-
rectly fastened.
 Prop the motorcycle on its
side stand
– Make sure the ground is level and firm.  Insert the softbag into the
stowage compartment as
illustrated
 Pass loops 2 through the
stowage-compartment rail at
positions B, C and through
the cover at position A
 Engage in hook 1
C
B
A
1
2
10K14bkg2.book Seite 15 Montag, 15. September 2003 5:30 17

11
16
General information and controls
1
Softbag
OA
Softbag for rear seat,
securing/removing
e Attention:
Make sure the softbag is cor-
rectly fastened.
See the installation instructions
enclosed with the softbag for a
more detailed description.  Prop the motorcycle on its
side stand
– Make sure the ground is
level and firm.
 Remove the seat (
b14)
 Secure strap 1 to the frame
cross-member as illustrated
 Install the seat
OAOptional accessory
10K14bkg2.book Seite 16 Montag, 15. September 2003 5:30 17

111
17
General information and controls
SoftbagOA
• Lay the softbag on the rear seat with the zip fastener
toward the rear
 Thread front straps 4 through
loops 3 on left and right, pull
the straps taut and secure
them
 Loop rear straps 5 on left and
right around the luggage car-
rier (arrow) as illustrated
Engage buckle 2 and pull the
strap taut Removal is the reverse of the
installation procedure
OAOptional accessory
2
54
3
10K1401g2.fm Seite 17 Montag, 29. September 2003 4:09 16

11
18
General information and controls
Softbag for luggage
carrier, securing/
removing
e Attention:
Max. load on luggage carrier
5 kg (approx. 11 lbs)
Make sure the softbag is cor-
rectly fastened.
See the installation instructions
enclosed with the softbag for a
more detailed description.
OAOptional accessory
 Prop the motorcycle on its side stand
– Make sure the ground is
level and firm.
 Slide softbag 1 onto luggage
carrier 3 in direction A from
the rear
 Close both Velcro fasteners 4
in direction C
 With the softbag for the rear
seat installed, engage zip
fastener 2 and close in
direction B
Removal is the reverse of the
installation procedure
SoftbagOE
12
3
4
A
B
C
10K14bkg2.book Seite 18 Montag, 15. September 2003 5:30 17

111
19
General information and controls
TopcaseOE
d Warning:
After an accident or if the
motorcycle has fallen over,
check that the topcase is cor-
rectly secured.
Max. load in topcase: 5 kg
(approx. 11 lbs)
With the topcase installed, it
is advisable not to exceed
130 km/h (80 mph).
Opening the topcase Turn the key in the topcase lock to position A
Swing latch 1 up until the lid
of the topcase opens
Closing the topcase Turn the key in the topcase lock to position A
 Push the lid of the topcase
down
Push latch 1 down
 Lock the case and remove the
key
OAOptional accessory
1
A
10K14bkg2.book Seite 19 Montag, 15. September 2003 5:30 17

ii
80
Index
SSafety check, 21, 22
Safety instructionsCatalytic converter, 51
Safety instructions, braking, 62, 63
Seat, 14
Service worldwide, 71
Shock-absorber adjustment, 37
Softbag, 15, 16, 17
Softbag for stowage compartment, inserting/
securing, 15
Speedometer, 6
Spring preload, 36 Front wheel, 36
Starter pushbutton, 13
Starting, 57
Switch on the ignition, 56
TTank cap, 26
Telltale and warning lights, 6 ABS, 7, 58
Coolant temperature, 7, 58
Engine oil pressure, 7, 59
Flashing turn indicator, left, 7
High-beam headlight, 7
Low fuel level, 7, 59
Neutral, 7
Tread depth, tyres, 38
Tripmeter reset button, 6 Type plate, 5
Tyres
Running in, 55
Tread depth, 38
Tyre pressures, 39
WWarning lightLow fuel level, 59
Warning lights ABS, 7, 58
Coolant temperature, 7, 58
Engine oil pressure, 59
Low fuel level, 7
S – Z
10K14bkg2.book Seite 80 Montag, 15. September 2003 5:30 17