BMW MOTORRAD F 850 GS 2021 Betriebsanleitung (in German)
Manufacturer: BMW MOTORRAD, Model Year: 2021, Model line: F 850 GS, Model: BMW MOTORRAD F 850 GS 2021Pages: 291, PDF-Größe: 5.44 MB
Page 271 of 291

Page 272 of 291

Declaration of
Conformity
Radio equipment electronic immobiliser (EWS4)
For all countries without EU
Technical information Frequency Band: 134 kHz (Transponder: TMS37145 / Type DST80, TMS3705 Transponder Base Station IC) Output Power: 50 dBµV/m
Manufacturer and Address Manufacturer: BECOM Electronics GmbH Address: Technikerstraße 1, A-7442 Hochstraß
Argentina
H-25246
Australia/New Zealand
R-NZ
United Arab Emirates
Philippiens
South Africa
India
ETA-SD-20200905860
Brunei
Belarus
Page 273 of 291

Indonesia
72790/SDPPI/2021
13349
Dilarang melakukan perubahan Spesifikasi yang dapat Menimbulkan gangguan fisik dan/atau elektromagnetik terhadap lingkungan sekitarnya
Paraquay
Singapore
Taiwan
低功 電波 射性電機管 辦法
第十二條 經型式認證合格之低
功率射頻電 機,非經許可,公
司、商號或使用者均不得擅 自變
更頻率、加大功率或變更原設計
之特性及 功能。第十四條 低功
率射頻電機之使用不 得影響飛航
安全及干擾合法通信;經發現有
干 擾現象時,應立即停用,並改
善至無干擾時方 得繼續使用。 前
項合法通信,指依電信法規定作
業之無線電 通信。
Malaysia
RFCL/47A/0920/S(20-3358)
Israel אוה תרושקתה דרשמ לש יטוחלא רושיא רפסמ 51-74908 רישכמה לש תירוקמה הנטנאה תא ףילחהל רוסא על רחא ינכט יוניש לכ וב תושאלו
Page 274 of 291

United States (USA) Contains FCC ID: ODE-MREWS5012 FCC § 15.19 Labelling requirements This device complies with part 15 of the FCC Rules and Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC § 15.21 Information to user
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Requirements
To comply with FCC RF exposure compliance requirements, the device must be installed to provide a separation distance of at least 20 cm from all persons.
Serbia
Canada Contains IC: 10430A-MREWS5012 This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Vietnam
A1109091120AF04A3
Page 275 of 291

Certifications
BMW Keyless Ride ID Device
USA, Canada:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Canada:
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Product name: BMW Keyless Ride ID Device FCC ID: YGOHUF5750 IC: 4008C-HUF5750
Page 276 of 291

USA: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Argentina:
H-17115
Page 277 of 291

Declaration Of Conformity
We declare under our responsibility that the product
BMW Keyless Ride ID Device (Model: HUF5750) camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:
1. Health and safety requirements contained in article 3 (1) a) • EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety 2. Protection requirements with respect to electromagnetic compatibility article 3 (1) b) • EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements • EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz 3. Means of the efficient use of the radio frequency spectrum article 3 (2) • EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment tobe used in the 25 MHz to 1000 MHz frequency range with power Ieveis ranging up to 500 mW; Part 1: Technical characteristics and test methods. Part 2: Harmonized EN covering essential requirements under article 3.2 ofthe R&TIE directive
Page 278 of 291

The product is Iabeted with the CE marking:
Velbert, October 15th, 2013
Benjamin A. Müller
Product Development Systems Car Access and Immobilization - Electronics Huf Hülsbeck & Fürst GmbH & Co. KG Steeger Straße 17, D-42551 Velbert
Page 279 of 291

Certification Tire Pressure
Control (TPC)
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
Le présent appareil est conforme
aux CNR d'Industrie Canada
applicables aux appareils radio
exempts de licence. L'exploitation
est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire
de brouillage, et
(2) l'utilisateur de l'appareil doit
accepter tout brouillage
radioélectrique subi, même si
le brouillage est susceptible
d'en compromettre le
fonctionnement. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
FCC ID: MRXBC5A4 IC: 2546A-BC5A4 FCC ID: MRXBC54MA4 IC: 2546A-BC54MA4
Page 280 of 291

Declaration
of
Conformity
Radio equipment TFT instrument
cluster
For all Countries without EU
Technical information
BT operating frq. Range
:
2402 – 2480 MHz
BT version: 4.2 (no BTLE)
BT output power: < 4 dBm
WLAN operating frq. Range::
2412 – 2462 MHz
WLAN standards:
IEEE 8
02.11 b/g/n
WLAN output power: < 20 dBm
Manufacturer and Address
Manufacturer: Robert Bosch Car Multimedia
GmbH
Add ress: Robert Bosch Str. 200,
31139 Hildesheim, Germany
Turkey
Robert Bosch Car Multimedia
GmbH, ICC6.5in tipi tel
siz
sisteminin 2014/53/EU
nolu yönetmeliğe uygun
olduğunu
beyan eder. AB Uygunluk
Beyanı'nın tam metni, aşağıdaki
internet adresinden görülebilir:
http://cert.bosch-
carmultimedia.net Brazil
Est
e equipamento
opera em
caráter secundário, isto é, não
tem direito a proteção contra
interferência prejudicial, mesmo
d
e estações do mesmo tipo, e
não
pode causar interferência a
siste mas
operando em caráter
primário.
Canada
This
device
complies
with Industry
Canada’s
licence-exempt RSSs
and part 15 of the FCC Rules.
O
peration is subject to the
following two conditions:
(1)
this device
may not cause
i
nterference, and
(2) this device
must accept any
i
nterference, including
interference that may
cause
undesired operation of the device. Changes
or modifications not
expressly approved by t
he party
responsible for compliance could
void the user's
authority to
operate the equipment. C-24711Argentina