ECU BMW MOTORRAD K 1200 R 2006 Rider's Manual (in English)

Remove securing screws1
from both sides of the bulb
housing.
Pull the bulb housing for-
ward to remove it and tilt it
slightly down. Remove bulb holder
2from
the headlight housing by
turning it counter-clockwise.
Remove bulb 3from the
bulb holder.
Replace the defective bulb.
Parking-light bulb
W5W/12V/5W Insert bulb
3into the bulb
socket.
Turn the bulb socket clock-
wise to install it in the head-
light housing.
7110zMaintenance

The headlight cable
could catch in the
steering if it is not routed
correctly.
Use the appropriate retaining
clips to secure electric wires
at the back of the headlight.
Push the bulb housing into
mounts 4on the frame. Install securing screws
1at
both sides of the bulb hous-
ing.
Replacing brake light
and rear light bulb
If it is not standing firmly,
the motorcycle could
topple in the course of the
operations described below.
Always make sure that the
motorcycle is stable and
firmly supported.
Make sure the ground is
level and firm and place the
motorcycle on its stand. Removing the seat ( 54)
Switch off the ignition.
Remove screw
1.
Pull the bulb housing to the
rear until it is clear of hold-
ers 2.
7111zMaintenance