ECU BMW MOTORRAD R 1150 GS Adventure 2002 Rider's Manual (in English)

111
17
General information and controls
Adjusting seat height
e Attention:
When installing the dualseat,
make sure it is firmly located.
 Remove the front seat
There are two front seat
heights: 1 = high 2 = low
Locking the dualseat
e Attention:
When installing the dualseat,
make sure it is firmly located.
 Push the front seat into the
desired position and press
gently into the holder to
secure
 Slide the rear seat into the
guide and press gently into
the holder to secure
Dualseat
A
1
2
10geBKg6.book Seite 17 Dienstag, 19. November 2002 1:11 13

111
21
General information and controls
R 1150 GS
d Warning:
After an accident or if the
motorcycle has fallen over,
check that the system cases
are correctly secured!
Max. load per system case:
10 kg (22 lbs).
With System cases installed,
it is advisable not to exceed
130 km/h (80 mph).
Opening the System case Turn key in case lock to position A
 Pull up the carrying handle 1
and catch 2
– The two indicators 3 turn red
 Open the System case
OEOptional extra
System caseOE
A
1
2
3
A
10geBKg6.book Seite 21 Dienstag, 19. November 2002 1:11 13

111
23
General information and controls
A
1
2
A
3
Installing System case
e Attention:
Risk of breaking the locking
tongue.
Before closing handle 1 or lock-
ing system 2, turn the key in the
case lock to position A.
OEOptional extra
d Warning:
Always make sure that the
case is secured.
An incorrectly secured case
could be lost and endanger
other road users.
 Insert the System case into the holder (arrows), making
sure that it is firmly seated in
the lower holder and the
upper hook
 Turn key in case lock to position A
 Push down carrying handle 1
– The two indicators 3 turn
black
 Lock the case and remove the
key
System caseOE
10geBKg6.book Seite 23 Dienstag, 19. November 2002 1:11 13

11
24
General information and controls
R 1150 GS Adventure
d Warning:
After an accident or if the
motorcycle has fallen over,
check that the aluminium
cases are correctly secured.
Max. load on case carrier
without cases fitted: max. 5kg
(11 lbs) Max. load per
aluminium case: 10 kg (22 lbs).
With aluminium cases
installed, it is advisable not to
exceed 130 km/h (80 mph).
Opening aluminium case Turn key in lock for lid of case to position A
 Pull lock barrel 2 up as far as
it will go –Latch
1 is released
– The lid of the case can now
be opened
Closing aluminium case Pull lock barrel 2 up as far as
it will go
 Close the case lid
 Press lock barrel 2 down as
far as it will go
e Attention:
Make sure that latch 1 is
correctly seated
Lock the case and remove the
key
OAOptional accessories
Aluminium caseOA
A
1
2
10geBKg6.book Seite 24 Dienstag, 19. November 2002 1:11 13

111
25
General information and controls
Aluminium caseOA
Removing aluminium case Turn key in case lock to position A
 Press lock barrel 1 down as
far as it will go
–Latch 2 is released
 Take out the key and remove
the aluminium case from its
holder
 Raise the plate of the case holder and lock it in this posi-
tion
OAOptional accessories
Installing aluminium case
d Warning:
When attaching, make sure
that the case is retained
securely.
An incorrectly secured case
could be lost and endanger
other road users.
 Unlock the plate of the case
holder and lower it into posi-
tion
 Press lock barrel 1 down
A1
2
10geBKg6.book Seite 25 Dienstag, 19. November 2002 1:11 13