clock setting BMW MOTORRAD R 850 R 2004 Rider's Manual (in English)

1
General information and controls
10
2
1
Trip meterReset:
Turn knob2 in the direction
indicated by the arrow until all
the readings on the trip meter
are reset to “0”Clock Setting the time:
 Press and hold down button 1
 Wait until the time shown by the clock is correct and
release button 1
Trip meter/clock
10r28bkg3.book Seite 10 Dienstag, 25. Mai 2004 5:26 17

2
41
2
Safety check
Shock-absorber adjustment
d Warning:
Before the journey starts, ad-
just the rear shock absorber to
suit the gross weight and load
on the motorcycle.
 Place the motorcycle on the centre stand
 Adjust the rear shock absorb-
ers with a screwdriver Basic setting (solo)
:
 Turn adjusting screw 1 in
direction indicated by arrow H
(clockwise) as far as it will go
 Turn adjusting screw 1 two
turns in the direction indicated
by arrow S (counterclockwise)
Hard setting “H”:
 Fully tighten adjusting screw 1
Soft setting “S”:
 Fully back off adjusting screw 1
1
10r2802g3.fm Seite 41 Donnerstag, 3. Juni 2004 11:29 11

22
42
Safety check
1
Suspension spring preload
d Warning:
Before riding off, always set
spring preload to suit total
weight.
For off-road riding, increase
spring preload at front and
rear by a suitable amount.
For safety reasons, never at-
tempt to alter spring preload
while the motorcycle is being
ridden. Always halt the motor-
cycle before adjusting.
Adjusting suspension
spring preload
 Place motorcycle on centre stand
 Adjust spring preload at
handwheel 1
Basic setting, solo:
Turn knob 1 as far as it will go
counter-clockwise as indi-
cated by the “ LOW” arrow
Turn knob 1 one mark clock-
wise as indicated by the
“ HIGH ” arrow
Setting for two-up and
luggage:
 Turn handwheel 1 fully to the
right as indicated by the
“HIGH” arrow
10r2802g3.fm Seite 42 Donnerstag, 3. Juni 2004 11:29 11