lock BMW X2 2023 User Guide

Jam protection system
General information If a resistance or blockage is detected while
the glass sunroof is closing, the closing opera

Backrest tilt1.Pull loop to unlock the backrest.2.Apply or lift weight on the backrest as
needed.
After the adjustment, move the backrest
slightly forward or back to engage it correctly.
Seat belts
General information
The vehicle is fitted with five seat belts to en

Child restraint systems with
tether strap
Safety information
Warning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective
effect is reduced. There is a risk of injury.
Make sure that the upper retaining strap
does not run over sharp edges and is not
twisted as it passes the upper anchor.
Warning
If the rear seat backrest is not locked, the
protective effect of the child restraint system
is limited or there is none. In certain situa

Locking the doors and
windows in the rear
Rear doors
Push the locking lever on the rear doors up.
The door can now be opened from the outside only.
Safety switch for the rear Press the button on the driver

not be deactivated and the gearshift request
will not be executed.
A selector lever lock prevents the following in

selector lever automatically returns to the
center position when released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle General informationIn some situations, the vehicle is to roll without
its own power for a short distance, for instance in a car wash, or be pushed.
Engaging selector lever position N:
with a latching selector lever
1.Turn on the ignition.2.If necessary, release the parking brake.3.Depress the brake pedal.4.Touch the selector lever lock and engage selector lever position N.5.Release brake.
The vehicle can roll.
If there is a malfunction, you may not be able
to change the selector lever position.
Manually unlock the transmission lock, if
needed, refer to page 117.
Engaging selector lever position N:
with a tap

Before unlocking the transmission lock man

Warning
If a rear seat backrest is not locked, unse

Checking and adjusting the tire
inflation pressure
Checking1.Switch off the compressor.2.Read the tire pressure on the tire pressure
display.
To continue the trip, a tire inflation pressure of at least 2 bar must be reached.
Removing and stowing the sealant
bottle
1.Unscrew the filler hose of the sealant bottle
from the tire valve.2.Press the red unlocking device.3.Remove the sealant bottle from the com

1.Hold the jack with one hand, arrow 1, and
grasp the jack crank handle with your other hand, arrow 2.2.Insert the jack into the rectangular recess ofthe jacking point closest to the wheel to be
changed.3.Extend the jack by turning the jack crank
handle or lever clockwise.4.Take your hand away from the jack as soon
as the jack is under load and continue turn