brake BMW X2 2023 Owners Manual

In order to be able to release the brake pedalat a vehicle standstill, engage the selector
lever in position P. The engine remains off.
To continue driving depress the brake pedal.When a gear is engaged, the engine starts au

selector lever automatically returns to the
center position when released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle General informationIn some situations, the vehicle is to roll without
its own power for a short distance, for instance in a car wash, or be pushed.
Engaging selector lever position N:
with a latching selector lever
1.Turn on the ignition.2.If necessary, release the parking brake.3.Depress the brake pedal.4.Touch the selector lever lock and engage selector lever position N.5.Release brake.
The vehicle can roll.
If there is a malfunction, you may not be able
to change the selector lever position.
Manually unlock the transmission lock, if
needed, refer to page 117.
Engaging selector lever position N:
with a tap

Harder vehicle deceleration
In certain situations, it can be necessary to
bring the vehicle to a halt more quickly than the Brake Assistant allows.
To do this, quickly apply extra force to the
brake. For a brief period, the brake pressure
will be higher than the brake pressure that is
achieved by the automatic braking function.
This interrupts automatic brake actuation.
Canceling automatic braking
It can be necessary to interrupt automatic braking in certain situations, for example for anevasive maneuver.
Canceling automatic braking:

The indicator lights in the instrument clusterlight up and the mark in the speedometer is set
to the current speed.
Cruise control is active and maintains the set
speed.
If necessary, the Dynamic Stability Control will be turned on.
Turning off
To switch off the system while standing, step on brake pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in thefollowing situations:

mats are securely fastened again after they
were removed, for instance for cleaning.
Driving in wet conditions In case of wet roads, exposure to road salt, inheavy rain, gently press the brake pedal every
few kilometers.
Ensure that this action does not endanger other road users.
The heat generated during braking dries brake disks and brake pads and protects themagainst corrosion.
In this way the brake force will be available when you need it.
Hills General information
Drive long or steep downhill gradients in the
gear that requires least braking effort. Other

brake disks and brake pads and protects them
against corrosion.
Chrome surfaces
Carefully clean components such as the radia