lights BMW X2 2023 Owners Manual

Lights and lightingLighting functionsIconFunctionBad weather light.Automatic headlight control.
Cornering light and variable light dis

Set interval period or sensitivity of the rain
sensor
Turn the thumbwheel on the wiper lever.
Cleaning the windshield and
headlights
Pull the lever.
Rear wiper Turning on
Turn the outer switch upward.

With Comfort Access: convenient
closing
Safety information
Warning
With convenient closing, body parts can be
jammed. There is a risk of injury. Make sure
that the area of movement of the doors is
clear during convenient closing.
Closing
Press and hold the button on the vehicle
key in close range to the vehicle.
The windows and the glass sunroof are
closed, as long as the button on the vehicle key
is pressed.
The exterior mirrors are folded in. The exterior mirrors are not folded in when the
hazard warning flashers are switched on.
Switching on interior lights and
courtesy lights
Press the button on the vehicle key with
the vehicle locked.
This function is not available, if the interior
lights were switched off manually.
The lighting functions may depend on the am

Overview
Storing
1.Turn on the ignition.2.Set the desired position.3. Press the button. The LED in the
button lights up.4.Press the desired button 1 or 2 while the
LED is lit. The LED goes out.
Button was pressed inadvertently:
Press the button again.
The LED goes out.
Calling up settings
The stored position is called up automatically.
Press the desired button 1 or 2.
The procedure stops when a seat setting switch or one of the memory buttons ispressed.
Once underway, adjustment of the seat posi

The indicator lights light up red, a sig

Check Control
PrincipleThe Check Control system monitors functionsin the vehicle and notifies you of faults in the
monitored systems.
General information
A Check Control message is displayed as a combination of indicator or warning lights and
text messages in the instrument cluster and in
the Head

Orange lightsActive Cruise Control The number bars shows the selecteddistance from the vehicle driving
ahead.
Camera

LightsVehicle features and options
This chapter describes all standard, country

The high beams can be switched on and offmanually at any time.
Activate/deactivate
Switch position, depending on the vehicle
equipment:
,
Press the button on the turn signal lever.
The indicator light in the instrumentcluster is illuminated when the low
beams are switched on.
The headlights are automatically changed be

AdjustingAdjust the brightness with the
thumbwheel.
Interior lights
General information
Depending on the equipment, the interior
lights, footwell lights, entry lights, and courtesy lights are controlled automatically.
The thumbwheel for the instrument lightingcontrols brightness of some of these features.
Overview
1Interior lights2Reading lights
Switching the interior lights on/off Press the button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
Switching the reading lights on/off Press the button.
Depending on the vehicle equipment, the read