AUX BMW X3 2.5I 2005 E83 Owner's Manual
[x] Cancel search | Manufacturer: BMW, Model Year: 2005, Model line: X3 2.5I, Model: BMW X3 2.5I 2005 E83Pages: 126, PDF Size: 4.65 MB
Page 90 of 126

Reference
At a glance
Controls
Driving tips
Mobility
89
Engine compartment
1Reservoir for windshield and headlamp
washer system90
2Body ground: negative terminal104
3Auxiliary terminal for jump starting104
4Engine oil filler neck91
5Brake fluid reservoir92
6Dipstick for engine oil90
7Coolant expansion tank91
Page 105 of 126

Giving and receiving assistance
104
First-aid kit*
Beneath the front passenger's seat.
To open: pull the handle and fold the cover
downward.
To close: fold the cover up.
Some of the articles in the first-aid kit may
be used within a limited time only. There-
fore, check the expiration dates of the contents
regularly and replace the contents in a timely
fashion as needed. You can find replacements
in any pharmacy. Always observe all legal regu-
lations requiring a first-aid kit to be carried in the
vehicle.<
Jump starting
When your battery is discharged, you can use
two jumper cables to start your vehicle with
power from the battery in a second vehicle. You
can also use the same method to help start
another vehicle. Use only jumper cables with
fully-insulated clamp handles.
To avoid the risk of potentially fatal injury,
always avoid all contact with electrical
components while the engine is running. Care-
fully observe the following instructions to avoid
personal injury and/or damage to one or both
vehicles.<
Preparing
1.Check whether the battery of the other
vehicle has a voltage of 12 Volts and
approximately the same capacitance in Ah.
This information can be found on the bat-
tery.2.Switch off the engine of the vehicle provid-
ing assistance.
3.Switch off any electrical systems and com-
ponents in both vehicles.
Ensure that no contact exists between
the bodywork on the two vehicles, other-
wise there is a danger of short circuits.<
Connecting jumper cables
To avoid personal injury from sparks,
always follow this sequence when con-
necting jumper cables.<
On your BMW, the auxiliary terminal for jump
starting in the engine compartment serves as
the battery positive terminal, refer also to
engine compartment overview on page89.
The symbol + is embossed on the cover.
1.Open the cover of the BMW auxiliary termi-
nal for jump starting, refer to arrow1.
2.Connect one terminal clamp of the posi-
tive/+ jumper cable to the positive terminal
of the battery or an auxiliary terminal of the
vehicle providing starting assistance.
3.Connect the second terminal clamp of the
positive/+ jumper cable to the positive ter-
minal of the battery or to an auxiliary termi-
nal of the vehicle to be started.
Your BMW has a special nut that serves as the
body ground or negative terminal, refer to
arrow2.
4.Attach one end of the jumper cable minus/–
to the negative terminal of the battery or to
an engine or body ground of the vehicle
providing assistance.