Xenon BMW X5 2015 F15 Owner's Manual

3.Fold open the holder.4.Slide wiper blade out of the wiper arm.5.Insert the new wiper blade and press it on
until it you hear it snap into the holder.6.Fold down the wipers.
Replacing the rear wiper blade
1.Fold up the wiper arm.2.Turn the wiper blade all the way back.3.Continue turning the wiper blade all the
way so that it pops out of the holder.4.Press the new wiper blade into the holder
until you hear it snap into place.5.Fold the wipers in.Lamp and bulb replacement
General information
Lights and bulbs make an essential contribu‐
tion to vehicle safety.
The manufacturer of the vehicle recommends
that you have appropriate work performed by a
dealer’s service center or another qualified
service center or repair shop if you are unfami‐
liar with it or if it has not been described here.
A spare lamp box is available from a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Information
Lights and bulbs WARNING
Bulbs can get hot during operation. Con‐
tact with the bulbs can cause burns. There is
risk of injuries. Only change bulbs after they
have cooled off.◀
WARNING
Work on switched-on lighting systems
can cause short circuits. There is risk of inju‐
ries or risk of property damage. When working
on the lighting system, switch off the lamps in
question. If necessary, heed the bulb manufac‐
turer's instructions.◀
CAUTION
Contaminated bulbs reduce their service
life. There is risk of property damage. Do not
hold new bulbs with your bare hands. Use a
clean cloth or something similar, or hold the
bulb by its base.◀
Xenon headlights DANGER
There can be high voltage in the lighting
system. There is danger to life. The manufac‐
turer of your vehicle recommends that the
work on the lighting system including bulb re‐Seite 241Replacing componentsMobility241
Online Edition for Part no. 01 40 2 963 410 - VI/15

placement be performed by a dealer’s service
center or another qualified service center or re‐
pair shop.◀
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting
diodes installed behind a cover as a light
source.
These light-emitting diodes, which are related
to conventional lasers, are officially designated
as Class 1 light-emitting diodes.
WARNING
Too intensive brightness can irritate or
damage the retina of the eye. There is risk of
injuries. Do not look directly into the headlights
or other light sources for an extended period of
time. Do not remove the LED covers.◀
Headlight glass
Condensation can form on the inside of the ex‐
ternal lights in cool or humid weather. When
driving with the lights switched on, the con‐
densation evaporates after a short time. The
headlight glass does not need to be changed.
If despite driving with the lights switched on,
increasing humidity forms, e. g. water droplets
in the lamp, the manufacturer of your vehicle
recommends having it checked by a dealer’s
service center or another qualified service cen‐
ter or repair shop.
Headlight setting The headlight adjustments can be affected by
changing lights and bulbs. After the headlight
adjustment was changed, have it checked and,
if necessary, corrected by a dealer’s service
center or another qualified service center or re‐
pair shop.Front lights, bulb replacement
Xenon headlights
Information
Because of the long service life of these bulbs,
the likelihood of failure is very low. Switching
the lights on and off frequently shortens their
service life.
If a bulb fails, turn on the front fog lights and
continue the trip with great care. Comply with local regulations.
DANGER
There can be high voltage in the lighting
system. There is danger to life. The manufac‐
turer of your vehicle recommends that the work on the lighting system including bulb re‐
placement be performed by a dealer’s service
center or another qualified service center or re‐
pair shop.◀
For checking and adjusting headlamp aim,
contact a dealer’s service center or another
qualified service center or repair shop.
Overview1Parking lights / daytime running lights2Low beams/high beams/headlight flasher3Turn signal
Xenon headlights
Low beams and high beams are designed with
xenon technology.
Seite 242MobilityReplacing components242
Online Edition for Part no. 01 40 2 963 410 - VI/15

Unlocking, settings 44
Unpaved roads, cross-coun‐ try trips 195
Updates made after the edito‐ rial deadline 7
Upholstery care 256
USB interface 179
V
Vanity mirror 176
Variable steering 141
Vehicle battery 246
Vehicle battery, replac‐ ing 246
Vehicle, break-in 192
Vehicle care 255
Vehicle features and op‐ tions 7
Vehicle identification num‐ ber 10
Vehicle jack 244
Vehicle paint 255
Vehicle storage 257
Vehicle wash 254
Ventilation 170
Ventilation, see Parked-car ventilation 173
Venting, see ventilation 170
Vent, see ventilation 170
Vertical Dynamic Control 141
VIN, see vehicle identification number 10
Voice activation system 26
W Warning and indicator lamps, see Check Control 89
Warning displays, see Check Control 89
Warning lamp in the exterior mirror, see Active Blind Spot
Detection 133
Warning messages, see Check Control 89 Warning triangle 249
Warranty 7
Washer fluid 80
Washer nozzles, wind‐ shield 79
Washer system 77
Washing, vehicle 254
Water on roads 193
Weights 261
Welcome lamps during un‐ locking 37
Welcome lights 105
Wheel cleaner 256
Wheels, changing 223
Wheels, everything on wheels and tires 215
Wheels, Flat Tire Monitor FTM 116
Wheels, Tire Pressure Moni‐ tor TPM 112
Window defroster, rear 170
Windows, powered 47
Windshield, climate con‐ trol 193
Windshield washer fluid 80
Windshield washer noz‐ zles 79
Windshield washer sys‐ tem 77
Windshield washer system, see washer/wiper sys‐
tem 77
Windshield wiper 77
Winter storage, care 257
Winter tires, suitable tires 224
Winter tires, tread 222
Wiper 77
Wiper blades, replacing 240
Wiper fluid 80
Wiper, fold-out position 79
Wiper system 77
Wood, care 256
Word match concept, naviga‐ tion 25 Wrench, see Onboard vehicle
tool kit 240
X
xDrive 139
Xenon headlights, bulb re‐ placement 242 Seite 273Everything from A to ZReference273
Online Edition for Part no. 01 40 2 963 410 - VI/15