engine oil BMW X5 4.8IS 2004 E53 Owner's Manual
[x] Cancel search | Manufacturer: BMW, Model Year: 2004, Model line: X5 4.8IS, Model: BMW X5 4.8IS 2004 E53Pages: 200, PDF Size: 3.91 MB
Page 7 of 200

 
5n
 
OverviewControlsMaintenanceRepairsDataIndex
 
Controls and features
 
Passenger safety systems: 
 
Airbags57
Transporting children safely59
Vehicle Memory, 
Key Memory63
 
Driving: 
 
Ignition lock64
Starting engine64
Switching off engine65
Handbrake66
Manual transmission66
Automatic transmission with 
Steptronic67
Turn signals/
headlamp flasher70
Washer/wiper system/
rain sensor71
Cruise control73
 
Everything under control: 
 
Odometer, outside temperature 
display75
Tachometer76
Energy control76
Engine oil thermometer77
Fuel gauge77
Temperature gauge78
Service Interval Display78
Check Control79
Computer82
MID Multi-Information 
Display83Digital clock in MID84
Computer in MID87
 
Technology for safety and 
driving convenience: 
 
PDC Park Distance Control92
Antilock Brake System93
DSC Dynamic Stability 
Control94
xDrive95
HDC Hill Descent Control96
Self-leveling suspension97
2-axle self-leveling 
suspension97
Brake Force Display99
Flat Tire Monitor100
 
Lamps: 
 
Parking lamps/low beams102
Adaptive Head Light103
High beams/roadside parking 
lamps103
Front fog lamps104
Instrument lighting104
Interior lamps104
 
Controlling climate for pleasant 
driving: 
 
Air conditioner106
Automatic climate control109
Roller sun blinds115
Independent ventilation115
 
Cabin convenience: 
 
Integrated universal remote 
control116 
Telephone118
Glove compartment119 
Storage compartments119 
Cup holders120
Ashtray, front121 
Ashtray, rear121 
Cigarette lighter, rear122
 
Loading and transporting: 
 
Ski bag123 
Cargo area 
Folding rear backrests 
down124 
Roll-up cover125 
Partition net125 
Cover panels in cargo 
area127 
Power outlets128 
Pull-out cargo floor128 
Cargo loading130 
Roof-mounted luggage rack132  
Page 8 of 200

 
Contents
 
Operation, maintenance
Owner service procedures
 
Special operating instructions: 
 
Break-in procedures136
Driving your X5137
General driving notes138
Safe braking139
 
Wheels and tires: 
 
Tire inflation pressure140
Tire identification marks142
Wheel/tire condition143
Replacing wheels/tires144
Snow chains145
 
Under the hood: 
 
Hood146
Engine compartment 
essentials147
Washer fluid148
Engine oil148
Coolant150
Brake fluid151
 
Care and maintenance: 
 
The BMW Maintenance 
System152
 
Laws and regulations: 
 
California laws153
OBD interface socket153
 
Replacement procedures: 
 
Onboard tool kit158
Windshield wiper blades158
Lamps and bulbs159
Changing a tire163
Battery168
Fuses169
 
Assistance, giving and 
receiving: 
 
Receiving assistance170
Jump-starting171
Towing and tow-starting 
vehicle173 
Page 20 of 200

 
18n
 
Instrument cluster X5 4.8is 
 
1Fuel gauge77
2Indicator lamp for turn signals22
3Speedometer
4Indicator and warning lamps19 
to 22
5Tachometer76
Engine oil thermometer
6Coolant temperature gauge787Indicator and warning lamps19 
to 22
8Reset button for trip odometer75
9Service Interval Display78
10 Indicator for
>
 
Trip odometer/odometer75
>
 
Outside temperature75
11 Indicator for Check Control7912 Selector lever and program display 
for automatic transmission67
13 CHECK button79
14 Indicator and warning lamps19 
to 22
530us252 
Page 21 of 200

 
19n
 
OverviewControlsMaintenanceRepairsDataIndex
 
Indicator and warning lamps 
 
Technology that monitors itself 
 
Indicator and warning lamps that are 
identified by 
+
 
 are tested for proper 
functioning whenever the ignition key is 
turned. They each light up once for dif-
ferent periods of time.
If a fault should occur in one of the 
monitored systems, the corresponding 
lamp does not go out after the engine is 
started or it lights up while the vehicle is 
moving. You will see how to react to 
this in the following section.
 
Red: stop immediately
 
Battery charge current 
+
 
The battery is not being 
charged. There is a malfunction 
of the alternator drive belt or in the 
charging circuit of the alternator. Have 
the system checked immediately.
If the drive belt is defective, do not 
continue driving. The engine could 
be damaged due to overheating. If the 
drive belt is defective, increased steer-
ing effort is also required.<
 
 
Engine oil pressure +
 
Stop immediately and switch off 
the engine. Check the engine oil 
level; top up as required. If the oil level 
is correct: have the system checked 
immediately.
Do not continue driving. The 
engine could be damaged 
because of inadequate lubrication.<
 
 
 
Handbrake
 
* 
/ 
Brake hydraulic system 
+
 
Lights up with handbrake 
engaged. 
For additional information, refer to 
page 66 
Comes on although the handbrake is 
released: stop immediately. The brake 
fluid in the reservoir has fallen to below 
the minimum level. At the same time, a 
considerably longer brake pedal travel 
may be noticeable. Have the system 
checked immediately. 
During continued driving 
increased brake pedal pressure 
may be necessary, and considerably 
longer braking distances may result. 
Please remember to adapt your driving 
style accordingly.<
 
 
Before continuing your journey, be 
sure to read the notes on pages 139 
and 151.
Also comes on in the Check Control 
with the message "CHECK BRAKE 
LININGS".
Display of the previously 
described malfunction on Cana-
dian models.  
Page 23 of 200

 
21n
 
OverviewControlsMaintenanceRepairsDataIndex
 
Indicator and warning lamps 
 
Red: an important reminder
 
Handbrake
 
* 
Lights up with handbrake 
engaged. 
For additional information, refer to 
page 66
Handbrake warning lamp
 
*  
for 
Canadian models.
Please fasten safety belts +
 
Lights up for a few seconds or 
until driver fastens safety belt. 
Depending on model, together with an 
acoustic signal
 
* 
 or a message
 
* 
 in the 
Check Control. 
For additional information on safety 
belts, refer to page 49
Airbags 
+
 
A fault has occurred in the air-
bag system. Have the system 
checked as soon as possible. 
For additional information, refer to 
page 57
 
Yellow: check as soon as possible 
 
DBC Dynamic Brake Control 
+
 
Fault in the DBC system. Please 
have the system checked as 
soon as possible.
For details on DBC, refer to page 93
Display of the previously 
described malfunction on Cana-
dian models.
Engine oil level
Comes on while driving: the oil 
level is at the absolute mini-
mum; refill as soon as possible. Do not 
drive more than approx. 30 miles/50  km 
until you do. 
For additional information, refer to 
page 148
Engine oil level 
Comes on after the engine has 
been switched off: add engine 
oil at your earliest opportunity, e.g. 
when you stop to refuel.
For additional information, refer to 
page 148
Automatic transmission
*
The automatic transmission 
switches into the emergency 
program due to a fault. Have the system 
checked as soon as possible. 
For additional information, refer to 
page 69
Brake pads
* +
Have the condition of the brake 
pads checked.
For additional information, refer to 
page 139
Self-leveling suspension
* +
The self-leveling suspension is 
inactive. Have the system 
checked as soon as possible.
For additional information, refer to 
page 97 
Page 79 of 200

Maintenance
77n
OverviewControlsRepairsDataIndex
Engine oil thermometer Fuel gauge X5 4.8is The general operating temperature lies 
between 1767/806 and 2487/
1206. Do not exceed the maximum 
value of 3027/1506.530us232
If the indicator lamp comes on and 
stays on, there are approx. 
>2.0 gal./8 liters, 6-cylinder engine
>2.5 gal./10 liters, 8-cylinder engine
of fuel still in the tank.
Tank capacity: approx. 24.6 gal./
approx. 93 liters.
If the tilt of the vehicle varies, when you 
are driving in mountainous areas, for 
example, the indicator may fluctuate 
slightly.390us006
Refuel well before the tank is 
empty, as otherwise engine func-
tions will not be ensured and damage 
can occur if you drive down to the last 
drop.<
When you switch on the ignition, the 
indicator lamp comes on briefly to con-
firm that the system is operational. 
Page 80 of 200

78n
Temperature gauge  Service Interval Display Blue The engine is still cold. Drive at moder-
ate engine and vehicle speeds.Red When you switch on the ignition, the 
warning lamp
* comes on briefly to con-
firm that the system is operational. 
If the warning lamp lights up during 
driving or the message "COOLANT 
TEMPERATURE" appears in the Check 
Control: the engine is overheated. 
Switch off the engine immediately and 
allow it to cool down.
Checking coolant level, refer to 
page 150. 
390de007
Between blue and red zones Normal operating range. The dial may 
wander into the red field. 
The range of available displays varies 
according to your individual vehicle's 
equipment. 
Green lamps The number of illuminated lamps 
decreases as the time for your next 
maintenance visit approaches.Yellow lamp This field appears together with 
OILSERVICE or INSPECTION. 
Maintenance is due. Please contact 
your BMW Sports Activity Vehicle cen-
ter for an appointment.Red lamp The maintenance deadline has been 
passed.390us008 
Page 81 of 200

Maintenance
79n
OverviewControlsRepairsDataIndex
Check Control Graphic display
* 
The following alerts or status messages 
are displayed with icons as of ignition 
key position 2 until the defects are cor-
rected: 
1Check low beams 
2Add washer fluid, goes out after 
approx. 1 minute 
3Door open 
4Tailgate open 
5Check brake and tail lamps. A defec-
tive center brake lamp is indicated by 
the upper symbol 
When you open the door after stopping, 
a warning signal sounds without a 
visual indicator for: 
>LIGHTS ON
>KEY IN IGNITION LOCK. 390de121
Alphanumeric display
* 
Text messages are used to alert the 
driver to system malfunctions as of igni-
tion key position 2. The alert is accom-
panied by an acoustic signal.
1Status messages symbol
2Display
3CHECK button 
Messages concerning system faults are 
differentiated based on two priorities: 530de254
Priority 1
These defects are immediately indi-
cated by an acoustic signal and a flash-
ing warning symbol 1. Simultaneous 
defects will be displayed consecutively. 
These status messages remain in the 
display until the defects are corrected. 
They cannot be deleted by pressing the 
CHECK button 3: 
>RELEASE PARKINGBRAKE
>COOLANT TEMPERATURE
Temperature too high. Stop the vehi-
cle immediately and switch off the 
engine, refer to pages 78 and 150
>STOP! ENGINE OILPRESS
Oil pressure too low. Stop the vehicle 
immediately and switch off the 
engine, refer to pages 19, 148 
Page 82 of 200

80n
Check Control >CHECK BRAKE FLUID
Level has dropped approx. to mini-
mum. Have the brake fluid topped up 
as soon as possible, refer to 
page 151. Have the reason for the 
brake fluid loss eliminated by your 
BMW Sports Activity Vehicle center
>DSC/4x4 INACTIVE
DSC and/or 4-wheel drive system 
xDrive has failed.
The stabilizing interventions of DSC 
and/or the 4-wheel drive system 
xDrive are no longer available. Drive 
may then only be carried out via the 
rear axle. 
Have the system checked at the 
nearest BMW Sports Activity Vehicle 
center.
For additional information, refer to 
page 95
>SELFLEVEL SUSP.INACT
* 
Please consult the nearest BMW 
Sports Activity Vehicle center
>SELFLEVEL SUSP.INACT*
MAX. 35 MPH/MAX. 60 KM/H
*
These messages are displayed con-
secutively.
Do not exceed a maximum speed of 
35 mph/60 km/h.
Please consult the nearest BMW 
Sports Activity Vehicle center>TRANSMISS'N OVERHEAT
*
Reduce speed immediately and stop 
at a suitable location so that the sys-
tem can cool down again. Please 
contact the nearest BMW Sports 
Activity Vehicle center
>LIMIT
* 
Display when the programmed road-
speed limit is exceeded, refer to 
page 87. 
Priority 2
These displays appear for 20 seconds 
as of ignition key position 2. The warn-
ing symbols remain after the message 
disappears. You can open the mes-
sages again for display by pressing the 
CHECK button.
>TRUNKLID OPEN
This message only appears when 
starting off
>DOOR OPEN
This message appears after a mini-
mal defined road speed has been 
exceeded
>FASTEN SEAT BELTS
* 
In addition, the indicator lamp with 
the belt symbol lights up and an 
acoustic signal sounds
>WASHER FLUID LOW
Too low, top up at the next opportu-
nity, refer to page 148>CHECK ENGINE OIL LEV
The oil level is at the absolute mini-
mum point. Therefore, have the 
engine oil topped up as soon as pos-
sible, refer to page 148. Until then, 
do not drive more than approx. 
30 miles/50 km
>CHECK GAS CAP
Check to see whether the fuel filler 
cap has been closed properly, refer 
to page 25
>OUTSIDE TEMP. +237/–56 
This display is only an example. The 
current temperature is displayed at 
outside temperatures of +37.57/
+36 and below, refer also to 
page 75 
>CHECK BRAKE LIGHTS
A lamp has failed or the electrical 
circuit has a fault, refer to page 161 
or consult a BMW Sports Activity 
Vehicle center
>CHECK LOWBEAM LIGHTS
CHECK SIDE LIGHTS
CHECK REAR LIGHTS
CHECK FRONT FOGLAMPS
CHECK LICPLATE LIGHT
CHECK HIGHBEAM LIGHT
CHECK BACK UP LIGHTS
The respective lamp may have failed 
or the electrical circuit may be defec- 
Page 83 of 200

Maintenance
81n
OverviewControlsRepairsDataIndex
Check Controltive, refer to page 159 or consult a 
BMW Sports Activity Vehicle center
>TRANS. FAILSAFE PROG
* 
Please consult the nearest BMW 
Sports Activity Vehicle center, refer 
to page 69
>CHECK BRAKE LININGS
Have the brake pads inspected by 
your BMW Sports Activity Vehicle 
center, refer to page 139
>CHECK COOLANT LEVEL
Coolant too low, top off at the next 
opportunity, refer to page 150
>ENGINE FAILSAFE PROG
Fault in the engine electronics. 
You can continue to drive with 
reduced engine output or engine 
speed. 
Please have the system inspected by 
your BMW Sports Activity Vehicle 
center. 
Displays after completion of trip All of the malfunctions registered during 
the trip appear consecutively when the 
ignition key is turned to position 0. 
The following displays will appear when 
appropriate: 
>LIGHTS ON 
>KEY IN IGNITION LOCK >CHECK ENGINE OIL LEV 
Top up engine oil at the next opportu-
nity, e.g. while refueling, refer to 
page 148. 
This display appears when you open 
the driver's door after parking the vehi-
cle. A supplementary acoustic signal is 
also heard. 
Status messages remain available with 
the CHECK button 3 for a period of 
approx. three minutes after the display 
goes out and the key is removed from 
the ignition lock. If there were multiple 
messages, press the CHECK button 
repeatedly to view them all in 
sequence. 
Checking Check Control Press the CHECK button 3 with the 
ignition key in position 2: 
"CHECK CONTROL OK" appears in the 
display. 
No malfunctions are present in the 
monitored systems. Computer You can find a description of the com-
puter on pages 82 and 87 as well as in 
the Owner's Manual for Onboard Com-
puter.You can have the Check Control 
and computer messages dis-
played in a different language.<