BMW X5M 2009 E70 Owner's Manual
Manufacturer: BMW, Model Year: 2009, Model line: X5M, Model: BMW X5M 2009 E70Pages: 317, PDF Size: 9.56 MB
Page 141 of 317

Driving tips
 139Reference
At a glance
Controls
Communications
Navigation
Entertainment
Mobility
speed. This is the fastest way for the cold 
engine to reach its operating temperature.
Thinking ahead when driving
Avoid unnecessary acceleration and braking. 
To do so, maintain the appropriate distance 
from the vehicle in front of you. An anticipatory 
and smooth driving style reduces fuel con-
sumption.
Avoiding high engine speeds
Driving at a low engine speed reduces fuel con-
sumption and minimizes wear.
Taking advantage of coasting
The flow of fuel is interrupted when coasting.
Switching off engine during longer 
stops
Switch off the engine at longer stops such as 
traffic signals, railroad cr ossings, or in traffic 
jams. Even having the en gine switched off for 
approx. 4 seconds results in fuel savings.
Switching off functions currently not 
required
Functions such as air conditioning, seat heat-
ing, or rear window defrosting consume a lot of 
energy and require additional fuel. Their influ-
ence is particularly pron ounced in city traffic 
and stop & go operation. For this reason, it is a 
good idea to switch th ese functions off when 
they are not really needed.
Having maintenance carried out
Have the vehicle serviced regularly in order to 
achieve the optimum economy and service life 
of your vehicle. BMW  recommends having the 
maintenance performed by a BMW Sports 
Activity Vehicle Center.  Also pay attention to 
the BMW maintenance system, refer to 
page 263.
General driving notes
Closing liftgate
Operate the vehicle only when the liftgate 
is completely closed. Otherwise, exhaust 
fumes could enter into  the passenger compart-
ment. <
If it is absolutely necessa ry to drive with the lift-
gate open:
1. Close all windows as well as the glass sun-
roof
*/panorama glass sunroof*.
2. Increase the air volume  of the automatic cli-
mate control to a high level, refer to 
page 116.
Hot exhaust system
As in all vehicles, extremely high temper-
atures are generated on the exhaust sys-
tem. Do not remove the  heat shields installed 
adjacent to it, and neve r apply undercoating to 
them. When driving, stan ding at idle and while 
parking take care to avoid possible contact 
between the hot exhaust  system and any highly 
flammable materials such  as hay, leaves, grass, 
etc. Such contact could lead to a fire, and with it 
the risk of serious property damage as well as 
personal injury. Do not  touch hot tailpipes, as 
otherwise there is a danger of burns. <
Diesel particulate filter*
Soot particles are collected in the diesel partic-
ulate filter and are periodically cleared out 
through high-temperature combustion. This 
cleaning process lasts fo r several minutes. You 
may sometimes notice it by the fact that the 
engine temporarily runs a little less smoothly 
and requires a somewhat higher engine speed 
to achieve the usual powe r. You may also notice 
additional sounds and small amounts of smoke 
coming from the exhaust, even for a brief time 
after switching off the engine.
Hydroplaning
When driving on wet or slushy roads, 
reduce road speed. If  you do not, a wedge 
of water can form between tires and road sur-
face. This phenomenon is  referred to as hydro- 
Page 142 of 317

Things to remember when driving
140
planing, and is characterized by a partial or 
complete loss of contac
t between the tires and 
the road surface, ultima tely undermining your 
ability to steer and brake the vehicle. <
The risk of hydroplaning increases as the tread 
depth of the tires decreases, also refer to Mini-
mum tread depth on page 255.
Driving through water
Maximum water depth:
>BMW X5 20 in/50 cm
> BMW X6 17 in/45 cm
Only drive through water up to the above-
mentioned depth at no greater than walk-
ing speed; otherwise, the engine, electrical sys-
tem, and transmission can be damaged. <
Braking safely
Your BMW is equipped with ABS as a standard 
feature. In situations that require it, it is best to 
brake with full force. Since the vehicle maintains 
steering responsiveness, you can still avoid 
possible obstacles with a minimum of steering 
effort.
Pulsation of the brake pedal, combined with 
sounds from the hydraulic circuits, indicate that 
ABS is in its active mode.
Do not drive with your foot resting on the 
brake pedal. Even light but consistent 
pedal pressure can lead  to high temperatures, 
brake wear and possibly  even brake failure.<
Driving in wet conditions
When roads are wet or there is heavy rain, 
briefly exert gentle pre ssure on the brake pedal 
every few miles. Monitor traffic conditions to 
ensure that this maneuver does not endanger 
other road users. The heat generated in this 
process helps dry the pads  and rotors to ensure 
that full braking efficiency  will then be available 
when you need it.
Hills
To prevent overheating and the resulting 
reduced efficiency of the brake system, 
drive long or steep downhill gradients in the  gear in which the least br
aking is required. Even 
light but consistent pressure on the brake pedal 
can lead to high temperatures, brake wear and 
possibly even brake failure. <
The braking effect of the engine can be further 
increased by downshifting  in the manual mode 
of the automatic transmis sion, if necessary into 
first gear, refer to page 71. This prevents an 
excessive strain on the brakes.
Do not drive in idle or with the engine 
stopped, otherwise there will be no 
engine braking action or support of the braking 
force and steering. 
Never allow floor mats, carpets or any other 
objects to protrude into  the area of movement 
of the pedals and impair their operation. <
Corrosion on brake rotors
When the vehicle is driven only occasionally, 
during extended periods when the vehicle is not 
used at all, and in op erating conditions where 
brake applications are less  frequent, there is an 
increased tendency for corrosion to form on 
rotors, while contaminan ts accumulate on the 
brake pads. This occurs because the minimum 
pressure which must be exerted by the pads 
during brake applications to clean the rotors is 
not reached.
Should corrosion form on  the brake rotors, the 
brakes will tend to re spond with a pulsating 
effect that even extended  application will fail to 
cure.
When vehicle is parked
Condensation forms in the automatic climate 
control system during operation, and then exits 
under the vehicle. Traces of condensed water 
under the vehicle are therefore normal.
Before driving into a car wash
Fold in the exterior mirrors, refer to page 57, 
otherwise they could be damaged due to the 
width of the vehicle.
Release the parking brake, particularly when 
you have activated Auto matic Hold, refer to 
page 67. 
Page 143 of 317

Driving tips
 141Reference
At a glance
Controls
Communications
Navigation
Entertainment
Mobility
General information on the care of your BMW is 
provided beginning on page265.
Mixed tires*
Before driving into a car wash, make sure 
that the vehicle width is not too large for 
the car wash, as otherwise the vehicle and the 
car wash could be damaged. <
BMW X5: rear window wiper
The rear window wiper can be damaged in car 
washes. Take appropriate protective measures; 
ask the car wash operator if necessary.
With comfort access*
Insert the remote control  into the ignition lock.
The engine can be switched off in transmission 
position N, also  refer to page41.
Loading
To avoid loading the tires beyond their 
approved carrying capacity, never over-
load the vehicle. Overlo ading can lead to over-
heating and increases the rate at which damage 
develops inside the tire s. The ultimate result 
can assume the form of a sudden blow-out. <
Make sure that no fluids leak in the cargo 
bay; otherwise the vehicle could be dam-
aged. <
Determining  loading limit
1.Locate the following statement on your 
vehicle's placard
*:
The combined weight of occupants 
and cargo should never exceed 
YYY lbs. or XXX kg. Otherwise, this could  damage the vehicle and produce unstable 
vehicle operating conditions.
<
2. Determine the combined weight of the 
driver and passengers that will be riding in 
your vehicle.
3. Subtract the combined weight of the driver 
and passengers from YYY lbs. or XXX kg.
4. The resulting figure equals the available 
amount of cargo and luggage load capacity. 
For example, if the YYY amount equals 
1,400 lbs. and there will be five 150 lbs. 
passengers in your ve hicle, the amount of 
available cargo and lugga ge load capacity is 
650 lbs.: 
1,400 lbs. minus 750 lbs. = 650 lbs.
5. Determine the combined weight of luggage 
and cargo being loaded on the vehicle. That 
weight may not safely  exceed the available 
cargo and luggage load capacity calculated 
in step 4.
6. If your vehicle will be towing a trailer, part of 
the load from your tra iler will be transferred 
to your vehicle. Consult the manual for 
transporting a trailer to determine how this 
may reduce the availa ble cargo and luggage 
load capacity of your vehicle.
Load
BMW X5: 
Page 144 of 317

Things to remember when driving
142
BMW X6:
The permissible load is the total of the weight of 
occupants and cargo/luggage. The greater the 
weight of occupants, the less cargo/luggage 
can be transported.
Stowing cargo
BMW X5
BMW X6
>
Load heavy cargo as far forward and as low 
as possible, placing it directly behind the 
backrest.
> Cover sharp edges and corners.
> When transporting very heavy cargo with 
unoccupied rear seats, insert the safety 
belts, the outer safety belts in the BMW X5, 
into the buckles on the opposite sides.
> Do not pile objects high er than the top edge 
of the backrest.
> Wrap sharp-edged or pointed objects 
which could strike th e rear window while 
driving. 
Page 145 of 317

Driving tips
 143Reference
At a glance
Controls
Communications
Navigation
Entertainment
Mobility
Securing cargo
BMW X5
BMW X6
>Use the luggage net*, retaining straps*, or 
securing straps to hold down small and 
lightweight luggage and cargo.
> For larger and heavier pieces, heavy-duty 
cargo straps
* are available from your BMW 
Sports Activity Vehicl e Center. Four lashing 
eyes
* mounted in the cargo bay are used to 
secure these heavy-duty  cargo straps, refer 
to illustrations.
> Observe the special instructions supplied 
with the heavy-duty cargo straps.
Position and secure the cargo as 
described above, so that it cannot endan-
ger the car's occupants, for example if sudden 
braking or evasive maneuvers are necessary.
Never exceed either the approved gross vehicle 
weight or either of the approved axle weights, 
refer to page 289, as excessive loads can pose 
a safety hazard, and may also place you in viola-
tion of traffic safety laws. 
You should never transport unsecured heavy or 
hard objects in the passenger compartment, as 
they could fly around and pose a safety hazard  to the vehicle's occupants during abrupt brak-
ing or evasive maneuvers.
Use only the lashing eyes pictured to fasten the 
heavy-duty cargo straps. Do not secure cargo 
with the attachment points for the top tether, 
refer to page
62; otherwise they could be dam-
aged. <
Roof-mounted luggage rack*
A special rack system is  available as an option 
for your BMW. Please co mply with the precau-
tions included with the installation instructions.
Loading roof-mounted luggage rack
Because roof racks raise the vehicle's center of 
gravity when loaded, they have a major effect on 
its handling and steering response. You should 
therefore always remember not to exceed the 
approved roof load capacity, the approved 
gross vehicle weight or the axle weights when 
loading the rack.
You can find the specified weights under 
Weights on page 289.
The load on the roof must be evenly distributed 
and must not extend outward beyond the limits 
of the loading surface. Always stow the heaviest 
pieces on the bottom. Be sure that adequate 
clearance is maintained  for raising the glass 
sunroof
*/panorama glass sunroof* and that 
objects do not project into the opening path of 
the liftgate.
Secure roof-mounted cargo correctly and 
securely to prevent it fr om shifting or falling off 
during the trip.
Drive smoothly. Avoid su dden acceleration and 
braking maneuvers. Take corners gently. 
Page 146 of 317

Things to remember when driving
144
Driving on poor roads
Your BMW is at home on all roads and surfaces. 
It combines a 4-wheel drive system with the 
advantages of a normal passenger car.Do not drive on unpaved terrain, as other-
wise the vehicle may be damaged. <
When you are driving on poor roads, there are a 
few points which you shou ld strictly observe for 
your own safety, for that  of your passengers, 
and for the safety of the vehicle:
> Familiarize yourself wi th the vehicle before 
driving off and avoid taking risks at all costs.
> Adapt your driving spee d to the road condi-
tions. The steeper and rougher the road 
surface is, the lower  the speed should be.
> If you want to drive on very steep uphill or 
downhill gradients, ma ke sure beforehand 
that the engine oil and coolant levels are 
near the MAX mark, refer to page 259.
BMW X5: you can operate your vehicle on 
uphill and downhill gradients with a maxi-
mum slope of 50 %.
> On very steep downhill slopes, use Hill 
Descent Control HDC, refer to page 98. 
BMW X5: it is possible to start off on inclines 
of up to 33 %. The permissible body roll is 
50 %.
> While driving, watch carefully for obstacles 
such as rocks or holes. Try to avoid these 
obstacles whenev er possible.
> Make sure that the undercarriage does not 
touch the ground, for example on crests and 
bumpy roads. The ground clearance of the 
vehicle is a maximum of approx. 8 in/20 cm. 
Please note that the ground clearance can 
vary depending on lo ading and the driving 
conditions of the vehicle.
> Only drive through road  surface water up to 
a maximum water depth of
> BMW X5 20 in/50 cm
> BMW X6 17 in/45 cm
and only drive at walking speed; do not 
remain stationary. >
After driving through water at low speed, 
lightly press the brake pedal several times 
to dry the brakes and to prevent the braking 
effect from being  reduced by wetness.
> Depending on the condition of the surface, 
it may be practical to briefly activate DTC, 
refer to DTC Dynamic Traction Control on 
page 97.
> If the drive wheels spin on one side, depress 
the accelerator pedal su fficiently so that the 
driving stability control systems can distrib-
ute the drive forces to the individual wheels.
Please note the following points after driving on 
poor roads to maintain the driving safety of your 
BMW:
> Clean the coarsest dirt from the body.
> Clean mud, snow, ice etc. from the wheels 
and tires and check the tires for damage. 
Page 147 of 317

Driving tips
 145Reference
At a glance
Controls
Communications
Navigation
Entertainment
Mobility 
Page 148 of 317

Page 149 of 317

Navigation
This chapter describes how you can
enter destinations and specify your route
so that your navigation system guides you
reliably to your destination.
Navigation 
Page 150 of 317

Starting navigation system
148
Starting navigation system
Your navigation system can use satellites to 
ascertain the precise position of your vehicle 
and guide you reliably to any destination you 
enter.
Navigation DVD
The navigation system requires a special navi-
gation DVD. The latest  version is available at 
your BMW Sports Activity Vehicle Center.
Inserting navigation DVD
Use the lower drive for navigation DVD.
1. Insert the navigation  DVD with the labeled 
side up.
The navigation DVD is  automatically pulled 
in.
2. Allow several seconds for the system to 
scan the data from the DVD.
Removing navigation DVD
1.Press the  button 1.
The DVD emerges slightly from the drive.
2. Remove the DVD.
If the DVD is not ejected fr om the drive, it is pos-
sible that it is blocked.  In this case a message is 
also shown on the Control Display.
Display in assi stance window
You can display the route  or the current position 
in the assistance window . This display remains 
visible even if you change to another applica-
tion.
1. Move the controller to th e right to change to 
the assistance window.
2. Press the controller.
Other menu items are displayed.
3. Select the desired route view or "Current 
position".
4. Press the controller.
Displaying arrow view in map view
If the navigation system suggests a change of 
direction, the arrow view is briefly displayed.
iDrive, for operating pr inciple refer to page16.
1. Press the  button.
This opens the start menu.
2. Press the controller to open the  menu.
3. Turn the controller until "Settings" is 
selected and press the controller.
*