ESP BUICK LACROSSE 2006 Get To Know Guide

3
SeeSection3ofyourOwnerManual.
B
C
E
F
G
H
J
K
L
W
V
D
NM
P
Y
O
A
Q
R
T
U
X
S
I
InstrumentPanelCluster
Yourvehicle’sinstrument
panelisequippedwiththis
clusteroroneverysimilar
toit.Theinstrumentpanel
clusterincludesthesekey
gaugesandlights/lamps.
A.TrunkAjar
B.DoorAjar
C.AntilockBrakeSystem
(ABS)
D.CruiseEngaged
E.TachometerF.Security
G.SeatBelt–Driver
H.DriverAirBag
I.ServiceVehicleSoon
J.Speedometer
K.HeadlampSuggested
L.FuelGauge
M.WasherFluidLevel
N.Battery
O.TemperatureGauge
P.KilometersperHour(KMH)Q.MilesperHour(MPH)
R.HighBeam
S.ReducedEnginePower
T.ServiceTractionControl
U.CheckGasCap
V.OilLevel/ChangeOilSoon
W.ServiceEngineSoon
X.OilPressure
Y.Brake
NOTE:
Theinstrumentpanel
clusterisdesignedtoletyou
knowaboutmanyimportant
aspectsofyourvehicle’s
operation.Itisimportantto
readyourOwnerManualand
becomefamiliarwiththeinfor
mationbeingrelayedtoyou
bythelights,gauges,DIC
messagesandindicators,as
wellaswhatactioncanbe
takentoensuresafetyandto
preventdamage.

5
Your ignition key identifies you to the
vehicle.Two keys can be programmed
for certain features that correspond to
each driver. To personalize a key:
1. From the Personal Program menu,
press the (Option) button until
“PERSONALIZE KEY” is displayed.
2. Press the (Set/Reset) button until
“YES” is displayed.
3. Press the button.
Personalization Features include:
•
Delayed Locking—Delays locking
of the vehicle doors for up to five
seconds after the last door is closed.Two chimes will sound when the
power door lock switch or the Lock
button on the Remote Keyless Entry
transmitter is pressed when a door is
open. To program:
1. From the Personal Program menu,
press the (Option) button until
“DELAYED LOCKING” is displayed.
2. Press the (Set/Reset) button until
“ON” or “OFF” appears.
3. Press the button to select it.
The ignition key must be removed for
the feature to work after programming.
•
Key Fob Feedback—Choose from
Off (no feedback), Lights (exterior
lights flash) or Lights and Horn when
you press the Remote Keyless Entry
transmitter (key fob) Lock button. To
program:
1. From the Personal Program menu,
press the (Option) button until
“FOB LOCK FEEDBACK” is displayed.
2. Press the (Set/Reset) button until
the desired setting is displayed.
3.Press the button to save the
setting.•
Exterior Light Delay—Sets the
time for exterior lights to remain on
after the key is removed from the
ignition or the vehicle is unlocked with
the Remote Keyless Entry transmitter.
To program:
1. From the Personal Program menu,
press the (Option) button until
“EXT LIGHT DELAY” is displayed.
2. Press the (Set/Reset) button to
scroll through OFF or 15/30/60/90
second delays.
3. Press the button to store a setting.
You can also use the (Option) and
(Set/Reset) buttons to personalize
each of the following:
• Return settings to factory
default/reset all keys
• Interior lights on when key is
removed from the ignition
• Content theftdeterrent system on/off
• Remote start on/off
• Personalize/replace key
• Personalize radio stations
• Auto door lock on/off
• Auto door unlock all/driver’s door/off
• Key fob unlock driver’s door/all doors
on first press
Exiting Programming Mode:The DIC
exits programming mode when:
•The vehicle is shifted out of Park.
• The vehicle is no longer in Run.
• You reach the end of the Personal
Program menu.
See Section 3 of your Owner Manual.