wiring BUICK LACROSSE 2011 Get To Know Guide

New Vehicle Limited Warranty 5
Exclusions:Excluded from the
powertrain coverage are sensors,
wiring, connectors, engine radiator,
coolant hoses, coolant and heater
core. Coverage on the engine
cooling system begins at the inlet to
the water pump and ends with the
thermostat housing and/or outlet
that attaches to the return hose.
Also excluded is the starter motor,
entire pressurized fuel system
(in-tank fuel pump, pressure lines,
fuel rail(s), regulator, injectors and
return line) as well as the Engine/
Powertrain Control Module and/or
module programming.
Transmission/Transaxle Coverage
includes: All internally lubricated
parts, case, torque converter,
mounts, seals and gaskets as well
as any electrical components
internal to the transmission/
transaxle. Also covered are any
actuators directly connected to the
transmission (slave cylinder, etc.). Exclusions:
Excluded from the
powertrain coverage are
transmission cooling lines, hoses,
radiator, sensors, wiring and
electrical connectors. Also excluded
are the clutch and pressure plate as
well as any Transmission Control
Module and/or module
programming.
Transfer Case Coverage includes:
All internally lubricated parts, case,
mounts, seals and gaskets as well
as any electrical components
internal to the transfer case. Also
covered are any actuators directly
connected to the transfer case as
well as encoder motor.
Exclusions: Excluded from the
powertrain coverage are transfer
case cooling lines, hoses, radiator,
sensors, wiring, electrical
connectors as well as the transfer
case control module and/or module
programming. Drive Systems Coverage
includes:
All internally lubricated
parts, final drive housings, axle
shafts and bearings, constant
velocity joints, propeller shafts and
universal joints. All mounts,
supports, seals, gaskets as well as
any electrical components internal
to the drive axle. Also covered are
any actuators directly connected to
the drive axle (i.e.: front differential
actuator, etc.).
Exclusions: Excluded from the
powertrain coverage are all wheel
bearings, drive wheel front and rear
hub bearings, locking hubs, drive
system cooling, lines, hoses,
radiator, sensors, wiring and
electrical connectors related to drive
systems as well as any drive system
control module and/or module
programming.

26 Emission Warranty Parts List
Hybrid
Auxiliary Transmission Fluid Pump *
Battery Cooling Fan
Battery Pack Control
Module (BPCM) **
Battery Pack Current Sensor
Brake Pedal Travel Sensor
Drive Motors *
Drive Motor Resolvers *
Drive Motor/Generator Control
Module (DMCM‐HCP,
MCPA, MCPB) **
Electro-Hydraulic Brake Control
Module (EBCM) **
Energy Storage Control Module **
Fuel Filler Pipe Adapter Seal
Hybrid Batteries *
Hybrid Battery Temperature Sensors
Hybrid Battery Voltage Sensors SGCM Coolant Circuit (fan, fan
relay and pump)
Starter Generator *
Starter Generator Control
Module (SGCM) **
Transmission Substrate
Temperature Sensor
Miscellaneous Items Used with
Above Components are Covered
Belts
Boots
Clamps
Connectors
Ducts
Fittings
Gaskets
Grommets
Hoses
HousingsMounting Hardware
Pipes
Pulleys
Sealing Devices
Springs
Tubes
Wiring and Relays
Parts specified in your maintenance
schedule that require scheduled
replacement are covered up to their
first replacement interval or the
applicable emission warranty
coverage period, whichever comes
first. If failure of one of these parts
results in failure of another part,
both will be covered under the
Emission Control System Warranty.
For detailed information concerning
specific parts covered by these
emission control system warranties,
ask your dealer.