dead battery BUICK PARK AVENUE 1994 Owners Manual

6. Connect the red positive
(+) cable to the positive
(+) terminal of the
vehicle with the dead
battery. Use a remote
positive
(+) terminal if
the vehicle has one.
7. Don't let the other end
touch metal. Connect it
to the positive
(+)
terminal of the good
battery. Use a remote
positive
(+) terminal if
the vehicle has one.
8. Now connect the black
negative
(-) cable to the
good battery's negative
(-) terminal.
Don't let the other end touch anything
until the
next step. The other end
of the negative cable
-doesn't go to the dead battery. It goes to a heavy
unpainted metal part on the engine
of the vehicle
with the dead battery.
201
ProCarManuals.com

9. Attach the cable at least
18 inches (45 cm) away
from the dead battery,
but not near engine
parts that move. The
electrical connection
is
just as good there, but
the chance of sparks
getting back to the
battery is much less.
y and rl 10. Now start the vehicle with the good batter!
the engine for
a while.
irn
11. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably needs
service.
12. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don’t touch
each other or any other metal.
DEAD BAlTERY
Remove the cables in this order.
202
ProCarManuals.com