Sun and temperature sensors automatically adjust the air
temperature, the airflow direction and the fan speed to
maintain your comfort setting. The system may supply
cooler air to the side toward the sun. Be careful not to
put anything over the sensors on top of the dash.
Temperature Button
To adjust the cornfort level you Want maintained inside
the vehicle, push the TEMP button. If you want a
warmer comfort level, push the red arrow. If you want a
cooler comfort level, push the blue arrow.
Your comfort
setting is shown in the display.
Fan Button
The speed of the blower fan is controlled automatically
if you have the system set for AUTO. Pressing the FAN button will
display and hold the current blower
fan setting.
If you want the blower fan to run at a lower speed, push
the bottom
of the FAN button. The fan speed will
decrease with every push
of the button until the lowest
speed is reached.
If you want to increase the fan speed,
push the top of the FAN button. Notice the fan
indicators on the display.
Mode Controls
Press the AIR FLOW button to deliver air through the
floor, middle or windshield outlets. The system will stay
in the selected mode until the AUTO button is pushed.
Press the up or down arrow on the AIR
FLOW button to
cycle through the available modes.
Automatic Operation
Press the AUTO button when you want the system
to automatically adjust to changes
in the temperature inside
the vehicle, the outside temperature and the sun load on the
vehicle. When the system is set for automatic operation,
air will come from the floor, middle or windshield outlets
depending on the temperature inside the vehicle, the outside
temperature and sun load. Fan speed will vary as the system gets to and maintains the comfort setting you have selected
through the use of the
TEMP button.
3-3
ProCarManuals.com
