display BUICK RAINIER 2005 Get To Know Guide

Getting to Know YourRainier4
Trip Information Button:Press
to access each of the odometer,
TRIP A, TRIP B and TIMER functions.To reset either trip odometer to zero,
access it on the DIC and press the
Select button ( ) for one second, orpress and hold the reset stem on the
instrument cluster.
Use the TIMER function to time the
length of your trip, pressing to startor stop the timer when the function is
displayed on the DIC. To reset it to zero,press and hold when the function isdisplayed on the DIC.
Fuel Information Button:Press
to access the range, average fuel
economy, fuel used and the GM Oil LifeSystem
TMstatus.
RANGE estimates the remaining dis
tance you can drive without refueling. It is based on recent fuel economy andremaining fuel.
AVG ECON calculates how many miles
per gallon you are getting based on current and past driving conditions. Press
and hold the reset stem while it is displayed and the DIC will begin calculatingaverage fuel economy from that point intime.
Driver Information Center (DIC)
The Driver Information Center (DIC) fea
tures a message center that can display
trip information, fuel economy information, personalization features and othermessages or warnings.The DIC displayis located above the steering wheel on
the instrument cluster, and can be pro
grammed in three languages. To accessthe various DIC modes, press one ofthe four DIC buttons located on the
steering wheel: Trip Information, FuelInformation, Personalization or Select.
Malfunction Indicator Lamp(Service Engine Soon Lamp)
Located on the instrument panel, this
lamp illuminates under a variety of conditions when the OnBoard DiagnosticsII (OBD II) system detects a malfunction
in the vehicle’s emission controls. If it is
lit steadily, check the gas cap to ensurethat it is attached and securely fastened.
Turn it clockwise until a “ratcheting”sound is heard, signaling that it is
secure. If this is the cause of the condi
tion, and the cap is installed properly,
this should turn the light off.
See Section 3 of your Owner Manual.

5
FUEL USED shows the current amount
of fuel used in gallons since the last
reset for FUEL USED. This mode shouldbe reset after every fuel tank fillup.
ENGINE OIL LIFE calculates an estimat
ed percentage of the engine oil’sremaining useful life and alerts the driver
when it’s time to change the oil by illumi
nating the CHANGE ENG OIL light on
the instrument cluster. Please rememberto always reset the oil life system afteran oil change by pressing and holding
for four seconds while ENGINE OIL
LIFE is displayed. When successful, the
DIC displays ENGINE OIL LIFE: 100%.
For full engine oil information, see Section 5
of your Owner Manual.
Vehicle Personalization
Depending on the equipment ordered on
your vehicle, you can personalize a widevariety of preferences on the DIC. Onlythe features included on your vehicle willbe displayed by the DIC.Personalization features can include:
• Alarm Warning Type
• Mirror Curb View Assist
• Easy Exit Driver Seat (see Seats
section of this booklet)
• Display Units (English/Metric)
• Display Language
Personalization Button:Up to two
people can program individualized settings. Press once and current
driver preferences will be displayed. Any
changes made at this time affect only
the displayed driver. Press the buttonagain to scroll through and personalizemenu features.
Select Button:When scrolling through
the personalization features, pressto scroll through the choices provided foreach menu item. When you find the
choice you want, press to select it
and move on to the next feature. Toreset all personalization features to theirdefault settings, hold and down forfour seconds. Driver preferences arerecalled by pressing memory button #1or #2 located on the driver’s door.
See Section 3 of your Owner Manual.

Remote Lock/Unlock Feedback
Program the Remote Keyless Entry
System’s lock/unlock feedback (horn,parking lamps, both or neither) by press
ing the personalization button ( ) on theDriver Information Center until REMOTELOCK FEEDBACK (or unlock, as
desired) appears on the display. Pressthe Select button ( ) to scroll through
the menu of choices. To program thelock/unlock feedback feature, presswhen the desired menu option is displayed.
See Section 3 of your Owner Manual.
The exterior lamps knob is located on
the instrument panel, to the left of thesteering wheel.
Turn off the Daytime Running Lamps
(DRL) and automatic headlamp system
• Move the knob to the OFF ( )
position.
The automatic headlamp system auto
matically reactivates at the next keyon.
Activate the Daytime Running Lamps
(DRL) and automatic headlamp system
• Move the knob to the AUTO ( )
position.
• All exterior lamps and the instrument
panel/radio lights will illuminate whenthey are needed.
Manually activate the parking lamps,
sidemarker lamps, taillamps, instrument panel/radio lights and licenseplate lamps
• Move the knob to the parking lamp
() position.
Manually activate the headlamps, all
exterior tail/sidemarker lamps andthe instrument panel/radio lights
• Move the knob to the ON ( )
position.
7
Headlamp ControlsThere are two methods for personalizing
your vehicle locking/unlocking prefer
ences. One method is to press the personalization button ( ) on the Driver
Information Center until AUTOMATIC
LOCKING (or AUTOMATIC UNLOCK
ING) appears on the display. Press the
Select button ( ) until the desired set
ting appears on the display and press
to select it.
For an alternate method of setting lock
ing/unlocking preferences, see theProgrammable Locking Feature sectionof your Owner Manual.
See Section 2 of your Owner Manual.

Getting to Know YourRainier8
DualZone Automatic Climate
Control System
Your vehicle is equipped with a climate
control system that automatically main
tains the desired temperature individual
ly for the driver and front seat passen
ger. Independent rear seat fan and airdistribution controls are also included for
increased rearpassenger comfort. Amemory feature for up to two drivers isalso included with this system.
Automatic Operation:Push the AUTO
button to set automatic air delivery
mode, fan speed, A/C and recirculation
functions. Each time the AUTO button is
Dome Lamp Override
The dome lamp
override button islocated below theexterior lamps knob.
To prevent thedome lamp fromilluminating when adoor is opened,press the button.
Although using your
Remote Keyless Entry transmitter tounlock the doors will activate the dome
lamp temporarily, the lamp will remain
deactivated when opening a door, untilthe override button is pressed again.
See Section 3 of your Owner Manual.
Activate the fog lamps
• Press the fog lamp button ( )
located on the instrument panel to theright of the exterior lamps switch.
• An indicator lamp will illuminate.
• To turn them off, press the button
again.
See Section 3 of your Owner Manual.
Automatic Headlamp System
(AHS)
When encountering darker conditions
during the daytime (such as when driving under a bridge or inside a parking
garage), you may notice the AHS tem
porarily activating your headlamps, inte
rior lights and radio display lights. This is normal. The lights will automatically
shut off when returning to daylight driving conditions.
When you start the vehicle at night,
the automatic headlamps will come on
immediately. The Automatic HeadlampSystem light sensor is located on top ofthe instrument panel near the windshield
defroster outlets. To ensure proper system operation, avoid placing objects or
stickers on or near the sensor.
See Section 3 of your Owner Manual.
Note:The fog lamps shut off automati
cally when the ignition is turned off andmust be reactivated when needed.

9
pressed, the display shows the current
driver’s set temperature, automatic air
delivery mode and fan speed. The display shows the outside temperature five
seconds later. At vehicle startup (with
the ignition off for two hours), the passenger temperature setting defaults to
match the driver’s setting.
Manual Operation:The OFF,
Recirculation, A/C, FRONT Defroster
buttons, fan speed and mode controlscan also be manually adjusted asdesired.
Rear Seat Controls:The rear seat
comfort controls are included with therear seat audio display on the rear of the
center console. The controls include apower button to turn the controls on andoff, up and down arrows for fan speed
regulation and a MODE button tochange airflow to the rear seat fromupper, floor or bilevel. When the front
seat MODE button is set to Defrost, therear controls do not function. Rear outletair temperature is determined by thefront passenger’s temperature setting.
See Section 3 of your Owner Manual.
Outside Rearview Mirrors
The power mirrors control is located on
the driver door. To operate:
1. Turn the knob toward the mirror you
wish to adjust.
2. Move the knob in the direction you
want the mirror to go. (Adjust it so you can see some of the side of your vehicle and the area behind your vehicle.)3. After adjusting
to the desired position, return the knob to the
center position or turn it towardthe other mirror and adjust that mirror using thesame procedure.
Outside Heated Mirrors:When you
turn on the rear window defogger, adefogger also warms the outside mirrors
to clear them of mist, ice and snow.
Outside Mirror with Curb View Assist:This feature automatically adjusts the
passengerside mirror downward to apreset tilt position when the vehicle is inReverse gear. The mirror returns to its
normal position when the vehicle is
moved out of Reverse. See your OwnerManual to activate the system for thefirst time.
See Section 2 of your Owner Manual.
Note:Before entering a car wash, fold
the mirrors in manually by pulling themtoward the vehicle. Push the mirrorsback out after exiting the car wash.

Getting to Know YourRainier12
• Press the blue OnStar button to
connect to an OnStar Advisor for services such as GM Goodwrench Remote Diagnostics or routing and location assistance.**
• Press the red Emergency button to
connect to an OnStar Advisor who can contact a nearby emergency services provider to dispatch ambulance, police, fire, or other emergency services to your location.
For more information about OnStar fea
tures, refer to the OnStar Owner’s
Manual and Audio Tour CD, located inyour glove box.
*Available in most markets
**Routing and location assistance may require
service upgrade
See Section 2 of your Owner Manual.
Audio Systems
Radio with Cassette/CD and RDS
Setting the Clock:
Press and hold the
H (or HR) button until the correct hour
appears. AM or PM will appear on the
radio display. Press and hold MN untilthe correct minute appears.
To set the time to the time of an FM
station broadcasting RDS information,press/hold HR and MN simultaneously
for two seconds until UPDATED (and
the clock symbol) appears on the display. If the time is not available from the
station, NO UPDAT will appear.
Using RDS Mode:Your radio’s RDS
mode allows you to:
• Seek only stations with your preferred
programming type
• Seek stations with traffic
announcements (MP3 radio only)
• Receive announcements of local
and/or national emergencies
• Receive and display messages from
radio stations
RDS features are available on FM sta
tions that broadcast RDS information.When tuned to an RDS station, the radiodisplays the station name instead of thefrequency. Most RDS stations broadcast
their station name, time of day and a
Program Type (PTY).
DISP:Press this knob to toggle
between the station frequency, station
name, PTY and the name of the program if available.
TRAF: Press this button to activate the
traffic announcement feature. The radio
Setting Stations:You can set up to 30
station presets (six AM, six FM1, six
FM2; an XM1 and XM2 satellite subscription is available).
• Turn the radio on.
• Press BAND to select AM, FM1, etc.
• Tune to the desired station using the
seek function or tune knob.
• Press AUTO EQ or AUTO TONE (as
applies to your radio) to select thesound equalization best suiting thetype of station selected.
• Press/hold a numbered button until a
beep confirms storage of the station.
•Repeat the previous steps for each
pushbutton.

13
BAND (ALTERNATE FREQUENCY):Allows the radio to switch to a station
with a stronger signal and of the same
PTY. Press and hold the button for two
seconds to turn it on; repeat to turn it off.
ALERT!:Warns of local or national
emergencies and appears on the displayduring such an announcement. If a CDor cassette tape is playing, the
announcement overrides it. An ALERT!announcement cannot be turned off, but
it is also not affected by tests of theEmergency Broadcast System.
MP3 Radio (if equipped):ACDR or
CDRW containing MP3 audio tracks willplay automatically when inserted into the
CD/MP3 player.
XM Satellite Radio (if equipped):Two
subscription service bands are available:
XM1 and XM2. To access them onequipped radios, press the BAND button
until XM1 or XM2 appears on the display.An extracost subscription to XM
Satellite Radio service brings you thequality of digital audio and text reception
from coast to coast. Available only in the
contiguous U.S., XM offers more than120 channels of music, news, sports,
talk and children’s programming. For
more information, contact XM on the
Internet at www.XMradio.com or call
1800852XMXM (9696).
Radio with SixDisc CD (if equipped)
To load one CD on vehicles equipped
with the radio/sixdisc CD:
• Turn the ignition on; then press and
release the LOAD side of the LOAD CD button.
• Wait for the green indicator light at
the right side of the slot to turn green.
• Insert the disc partway into the slot,
label side up; the player will pull thedisc in.
To load multiple CDs in the SixDisc CD
Player:
•Turn the ignition on; then press and
hold the LOAD button for two sec
onds. The unit beeps and the light tothe right of the slot begins to flash.
• When the light stops flashing and
turns green, insert a disc partway,
label side up.
• The indicator light will begin blinking
and then turn green. Load anotherdisc at this time.
will display traffic announcement brack
ets <> or TRAF (as applies to yourradio) if the station you’re currently on
broadcasts traffic announcements. If thestation doesn’t, the radio seeks one thatdoes (MP3 radio only).
INFO:If the tuned station has a mes
sage, the radio displays INFO. Press theINFO button to see the message.
TYPE:Press this button to turn the
Program Type selection on or off. Press
the TYPE button knob to select the
Program Type you want; then press the
or button and the radio seeks to the
first RDS broadcast of the selected
Program Type.

Getting to Know YourRainier14
Your vehicle’s Navigation Entertainment
System provides you with detailed mapsof all major highways and roads
throughout the United States. After youenter a destination, the system providesturnbyturn instructions for reachingyour destination. In addition, the systemcan help you locate banks, airports,
restaurants, post offices, ATMs andmore.
See Section 3 of your Owner Manual.
Touch Screen Navigation
Entertainment System (if equipped)
Note:See your Navigation
Entertainment System Quick ReferenceGuide for operating instructions.
HomeLink®Universal
Transmitter
This programmable transmitter can store
up to three frequencies for items such
as a garage door opener, entry door
lock or security system. With the ignition
OFF, program the transmitter as follows:
• Press and hold the two outside but
tons and release when the indicatorlight begins to flash (about 20 sec
onds; do not repeat this step when
programming second and third transmitter buttons).
•Hold the end of your handheld trans
mitter up to three inches away from
the surface of the universal transmitter and simultaneously hold down the transmitter button and the buttonon the HomeLink
®unit you wish to
program.
• The HomeLink
®indicator light will
begin blinking slowly. Programming is
complete when the indicator light onthe HomeLink
®transmitter flashes
rapidly.
• Release both buttons.
• When more than one disc is loaded,
a number for each disc is displayed.
• To load more than one but fewer than
six discs, press the LOAD buttonagain after loading the final CD.
• For every CD loaded, a number
appears on the radio display.
• To play a specific CD, press the CD
AUX button and then the number of
the CD you want to hear.
• A small bar appears under the CD
number that is playing, and the tracknumber appears.
See Section 3 of your Owner Manual.

15
For garage door openers with a “rolling
code,” continue with the following steps:
• Firmly press the training button (usu
ally marked “LEARN” or “SMART”) onthe garage door opener motor headunit near the antenna.
• Within 30 seconds, press and hold
the HomeLink
®transmitter button pro
grammed in the previous steps fortwo seconds.
• Press and release this button twice
more for two seconds each time.
See Section 2 of your Owner Manual.
Remote Keyless Entry System
The RKE system locks and unlocks the
doors and lift glass from a range of 3 to
30 feet (1–9 m). At times the range maybe shorter than usual, which is normal. If the transmitter doesn’t seem to beworking properly:
• Ensure that you are within transmitter
range of the vehicle. Rainy and
snowy weather can reduce transmitter range.
Note:To ensure successful HomeLink®
Transmitter programming, it’s important
that your garage door opener battery bewell charged.
Content TheftDeterrent System
The Content TheftDeterrent System has
a red indicator lamp on the instrumentpanel that is labeled
SECURITY. The
system can be activated in two ways:
• Press the
LOCKbutton on the
Remote Keyless Entry key fob afterclosing all doors.
• Press the power door
LOCKswitch
with the door open.
The alarm is not armed until the
SECURITYlight turns off (after a delay
of approximately 30 seconds).
If the alarm is tripped, the horn sounds
for 30 seconds, and the headlamps andparking lamps also flash for two minutes
to get visual attention. The alarm soundswhenever a locked door is opened with
out the key or Remote Keyless Entry
System transmitter.
See Section 2 of your Owner Manual.
• Check to see if other vehicles or
obstacles are blocking the transmittersignal by stepping a few feet to theleft or right, and hold the transmitterhigher when pressing the button(s).
• Consider the length of time that
the transmitter battery has been inservice and replace it if necessary
(the DIC will display “RFA # BATLOW” if the battery needs replacing).Use CR 2032 battery or equivalent.
See Section 2 of your Owner Manual.