ECU BUICK SKYLARK 1993 Owners Manual

4. Buckle the belt around the child, and make sure that
both the lap belt and the shoulder belt are secured
properly. Make sure that the shoulder belt crosses the
shoulder. See “Safety Belts, Rear’ Seat Passengers” in
the Index.
To remove and store the comfort guides, just perform
these steps in reverse .order. Squeeze the belt edges
together
so that you can take them out from the guides.
Pull the guide upward to expose its storage clip, and
then slide the guide onto the clip. Rotate the guide and
clip inward and in between the seat back and the interior
body, leaving only the loop
of elastic cord exposed.
Center Passenger Position
U
42

Child Restraints
Be sure to follow theinstructions for the restraint. You
may find these instructions on the restraint itself or in a
booklet, or both. These restraints use the belt system in
your vehicle, but the child also has to be secured within
the restraint to help reduce the chance of personal injury.
The instructions that come with the infant or child
restraint will show you how to do that.
1 Where to Put the Restraint
Accident statistics show that children are safer if they
are restrained in the rear rather than the front seat. We at
General Motors therefore recommend that you put your
child restraint
in the rear seat .unless the child is an
infant and you’re the only adult in the vehicle.
In that
case,
you might want to secure the restraint in the front
seat where you can keep an eye
on the baby. !. , . ...:
Wherever you install it, be sure to secure the child
2 ;. ,% #;$, :<.. 3,
I restraint properly.
. . <-
I A CAUTION:
An unsecured child restraint can move around in
a collision or sudden stop and injure people in
the vehicle. Be sure to properly secure any child restraint in your vehicle
-- even when no child is
in it.

1. Put the restraint on the seat. Follow the instructions 4. Buckle the belt. Make sure the release button faces
for the child restraint. upward or outward,
so you'll be
able to unbuckle it
quickly if you ever need to.
z4 ,Secure the child in the child restraint as the
.. :instructiom say.
3. Pull out the vehicle's safety belt and run the lap part
through or around the restraint. The child restraint
instructions will show you how. Tilt the latch plate to
adjust the belt if needed.
See if the shoulder belt would
go in front of the
child's face or neck.
If so, put it behind the child
restraint.
48

Securing: a Child Restraint in the Center Y
Rear Seat Position
When you secure a child restraint in a center seating
position, you’ll be using the lap belt.
See the earlier section about
. I’ !,;F Ft the to$ strap if the child
restraint has one.
i .+*) +,“.#kg! ::.,.: . ” .: .< ,~~~~~~~~~,~~.‘:;,,$ I. l.. r.: ,* -~ ._
1. Make the. belt as long as possible by tilting the latch
plate
ad pulling it along-the belt.
2. Put the restraint on the seat. Follow the instructions
for the child restraint.
3. Secure the child in the child restraint as the
instructions say.

4. You can make the belt longer by tilting the buckle
and pulling it along the belt.
5.
6.
Put the restraint on the seat. Follow the instructions
for the child restraint.
Secure the child in the child restraint
as the
instructions
say.

7. Run the belt through or around the child restraint. 9. To make it tight, pull the belt while you push down
The child restraint instructions will show
you how. on
the child restraint. If the belt won’t stay tight,
8. Put the hook on tk free end through the slot in the
latch plate. switch
it end for end.
directions-to be sure it is secure.
55

To replace the batteries. Rear Door Security Lock
1. Remove the screw from Your Buick may be equipped with rear door security
the back cover,, locks that help prevent passengers
from opening the rear
doors
of your car from the inside. To use one of these
locks:
1. Use a key to move the
lever all the way up.
2. Lift off the front cover, bottom half first.
3. Remove and replace the batteries. Put them in as the
4. Replace the front cover. Make sure the cover is on
tightly,
so water won’t get in. Replace the screw in
the back cover.
direction under
the batteries indicate.
2. Close the door.
3. Do the same thing to the other rear door lock.
e
69

The rear doors of your vehicle cannot be opened from
inside when this feature is in use. If you want to open a
rear door when. the security lock is on:
1. Unlock the door from the inside..
2. Then open the door from the outside.
If you don’t cancel the security lock feature, adults or
older children who ride in the rear won’t be able to open
the rear door from the inside. You should let adults and
older children know how these security locks work, and
how to cancel the locks.
To cancel the rear door lock:
1. Unlock the door from the inside and open the door
2. Use a key to move the lever all the way down.
from the outside.
3. Do the
same for the other rear door.
. The rear door locks will now work norinally.
Theft
Vehicle theft is big business, especially in some cities.
Although your Buick has a number
of theft deterrent
features, we know that nothing we put on it can make it
impossible to steal. However, there are ways you can
help.
Kev in the ipnition: If you walk away from your
vehicle with the keys inside, it’s an easy target for
joy
riders or professional thieves -- so don’t do it. . .) ..
When you park your Buick and open the driver’s’a*oor,
you’ll hear a tone reminding you to remove your key
from the ignition and take it with you. Always do this.
Your steering wheel will be locked, and
so will your
ignition and transaxle. And remember to lock the doors.
: .+.,-:.,: <::: ., .,<. , p,
Parking at Night: Park in a lighted spot, close all
windows and lock your vehicle. Remember to keep your
valuables out of sight. Put them in a storage area,
or take
them with you.

Step 7. Rotate the TUNE knob right or left to make the
next two numbers agree with your code.
Step
8. Press the BAND AM-FM Knob and “000” will
appear. Now you are ready to enter the second
three
digits of your code.
Step
9. Repeat steps 6 and 7 to enter digits.
Step
10. Press the AM-FM knob and “REP” will appear
for
5 seconds and then “000” will appear.
Step
11. Repeat steps 6 through 10. This time“SEC”
should appear indicating that the radio is secure.
If the
display shows
“ - - - ” , the verification steps .were not
successful and the entire sequence must be started again.
To Unlock The System After a Power Loss
When battery power is reapplied to a secured radio, the
radio won’t turn on and
“LOC” will appear in the
display.
Enter your secret code as follows; pause no more than
15 seconds between steps.
Step
1. Turn the ignition ON. (Radio off.)
Step
2. Press the SET button. The display will show
“000”.
Step 3. Enter the six digits of the code following steps 6
thru 9 as previously indicated. The display will show the
number as entered.
Step
4. Press the AM/FM button and the time appears -
indicating that the disabling sequence was successful. If
the display indicates “SEC ”, the number did not match
and the unit is still secured.
Disabling The Theft System
Step 1. Press preset buttons 1 and 4 for 5 seconds with
the ignition
ON and radio power OFF. The display will
show,“SEC”
, indicating the unit is in the secure mode.
Step
2. Press the SET button. The display will show
“000”.
Step 3. Enter the first three digits of the code following
steps
6 and 7 of the preceding directions. The display
will show the numbers as entered.
Step
4. Press the AM-FM button. The radio will display
“000”.
atep 5. Enter the second three digits of the code. The
display will show the numbers as entered.
Step
6. Press the AM-FM button. If the display shows
- - - ” , the disabling sequence was successful. (The
numbers matched the user-selected code or the factory 66

back-up code) and the unit is in the UNSECURED
mode. If the display shows"SEC", the disabling
sequence was.unsuccessfu1 and the numbers did not
match either of the codes and the unit will remain in the
SECURED mode.
Care of Your Cassette Tape Player
Your tapes will sound best if you clean your cassette
tape player from time to time. Use a non-abrasive
cleaning cassette instead of a music tape. Follow the
instructions on the cleaning cassette.
Store cassette tapes away from extreme heat or direct
sunlight. Protect the open ends from dirt or damage;
store them in their original cases or other protective
cases. Cassettes eventually wear out and you may need
to replace them if they become noisy.
Care of Your Compact Discs
Handle discs carefully. Store them in their original cases
or other protective cases and away from direct sunlight
and dust.
If the surface of a disc is soiled, dampen a
clean, soft cloth in a mild, neutral detergent solution and
clean it, wiping from the center to the edge.
Be sure never to touch the signal surface when handling
discs. Pick up discs by grasping the outer edges or the
edge of the hole and the outer edee.
133