seat adjustment CADILLAC CATERA 1998 1.G Owners Manual
[x] Cancel search | Manufacturer: CADILLAC, Model Year: 1998, Model line: CATERA, Model: CADILLAC CATERA 1998 1.GPages: 346, PDF Size: 19.13 MB
Page 15 of 346
Downloaded from www.Manualslib.com manuals search engine Seats and Seat Controls
This section tells you about the seats -- how to adjust
them, and
also about reclining front seatbacks, lumbar
adjustments, heated seats and head restraints.
Manual Front Passenger’s Seat
This feature is available on vehicles with cloth seats
only. Lift the bar under the front passenger’s seat to
unlock it. Slide the seat to where you want
it and release
the
bar. Try to move the seat with your body to be sure
the seat
is locked into place.
To tilt the front portion of the seat cushion up or down,
lift the seat lever located on the side of the seat cushion
closest to the door. Release the lever to lock the seat
into place.
Page 16 of 346
Downloaded from www.Manualslib.com manuals search engine 10 raise the seat cushion up or down, press one of
the rocker switch buttons located on the side of the
passenger’s seat cushion closest to the door. The top
button raises the seat cushion and the bottom button
lowers the seat cushion.
Manual Lumbar Support
The lumbar control is
located on the side
of
each front seatback closest
to the door. The control
provides additional support to your lower back and
works independently
of
other seat controls.
Use manual or power seat controls first to get the
proper seating position. Then proceed with the
lumbar adjustment.
The upper and lower seatback can be adjusted using the
small hand-wheel control. Turn the control forward to
increase support and rearward to decrease support.
Keep
in mind that as your seating position changes, as
it may during long trips, so should the position of the
lumbar support. Adjust the seat as needed.
Page 282 of 346
Downloaded from www.Manualslib.com manuals search engine Headlamp Aiming
Your vehicle has the composite headlamp system. These
headlamps have horizontal and vertical aim indicators.
The aim has been pre-set at the factory and should need
no further adjustment.
If your vehicle is damaged in an accident and the
headlamp aim seems to be affected, see your dealer.
Headlamps on damaged vehicles may require
recalibration of the horizontal aim by your dealer.
0
0
0
To check the aim, the vehicle should be properly
prepared as follows:
Place the vehicle on a level pad or surface.
The vehicle should not have any snow, ice or mud
attached to it.
The vehicle should be fully assembled and all other
work stopped while headlamp aiming is being done.
There should not be any cargo or loading of the
vehicle, except it should have a full tank of fuel and
one person or
160 lbs. (75 kg) on the driver's seat.
Tires should be properly inflated.
Rock the vehicle to stabilize the suspension.
0
0
0
I NOTICE:
To make sure your headlamps are aimed
properly, read all the instructions before
beginning. Failure to follow these instructions could cause damage to headlamp parts.
For the vertical adjustment, state inspection stations
generally will allow a reading of plus
0.76 degrees or
minus
0.76 degrees from the center of the bubble.
1 6-33
Page 331 of 346
Downloaded from www.Manualslib.com manuals search engine BBB Auto Line ................................ 7-1 1
Better Business Bureau Mediation
.................. 7-11
Blizzard
...................................... 4-26
Brake
Adjustment
.................................. 6-29
Fluid
....................................... 6-26
Master Cylinder
.............................. 6-26
Pad Wear Indicator Light
....................... 2-76
Parking
..................................... 2-24
Pedal Travel
................................. 6-29
Replacing System Parts
........................ 6-29
System Warning Light
......................... 2-65
To Shift Light
................................ 2-74
Transmission Shift Interlock
.................... 2-27
Wear
....................................... 6-28
Brakes,Anti -Lock
............................... 4-7
Braking
........................................ 4-6
Braking in Emergencies
........................... 4-9
Break-In, New Vehicle
.......................... 2-16
Brightness Control
.............................. 2-45
BTSI
......................................... 2-27
Bulb Replacement
.............................. 6-30
Capacities and Specifications
.................... 6-63
CarbonMonoxide
.............................. 4-27
Care
of Your Cassette Tape Player .................. 3-28
Care
of Your Compact Disc Player ................. 3-30 Care
of
Your Compact Discs ...................... 3-30
Cassette Tape Player
Errors .................. 3.11. 3. 18
CD Adapter Kits ............................... 3-25
CD Changer
................................... 3-22
Center Console Storage Area
...................... 2-48
Bulb Replacement
............................. 6-35
Central Door Unlocking System
.................... 2-5
CertificationLabel
.............................. 4-29
Chains, Safety
................................. 4-34
Changing a Flat Tire
............................. 5-21
Charging System Indicator Light
................... 2-65
Check Engine Light
............................. 2-70
Check Oil Light
................................ 2-74
Checking Your Restraint Systems
.................. 1-56
Chemical Paint Spotting
.......................... 6-52
Child Restraints
................................ 1-43
Securing in a Rear Seat Position
................. 1-48
Securing in the Right Front Seat Position
.......... 1-51
Top Strap ................................... 1-48
Chrome Wheels, Cleaning
........................ 6-50
Cigarette Lighter
............................... 2-49
CellularTelephone
.............................. 2-50
Center High-Mounted Stoplamp,
Chains, Tire
................................... 6-45
Wheretoht
.........,...................... l-47
CHMSL ...................................... 6-35
Cleaner, Air
................................... 6-15