navigation system CADILLAC CTS 2003 1.G User Guide

2-103
Status Menu Item Descriptions
The following paragraphs contain a more detailed
description of each menu item:
BLANK LINE/Blank Display: If you select this item,
nothing is displayed at the top of the screen.
OUTSIDE TEMP/Outside Temperature: If you select
this item, the current outside temperature is displayed at
the top of the screen. It will be in either degrees
Fahrenheit or degrees Celsius depending upon whether
the system is set for English or metric units. If you wish
to change the units, see ªEnglish/Metric Unitsº in the
Index.
MI TRIP A and B/Trip Odometer A and B: For
information on the trip odometers, see ªTrip Odometerº
listed previously in this section.
MPG AVG/Average Fuel Economy: If you select this
item, the approximate average miles per gallon (mpg) or
kilometers per liter (km/L) is displayed. This number is
calculated based on the number of mpg (km/L) recorded
since the last time this menu item was reset.
To reset the MPG AVG using the base audio system,
press the CLR button located in the center of the INFO
button to the right of the screen. The display will return
to zero.To reset the Average Fuel Economy using the
Navigation system, press and hold the multi
-function
button that corresponds to the Reset prompt in the upper
right of the display. The display will return to zero.
MPG INST/Instantaneous Fuel Economy: If you
select this item, the current fuel economy is displayed.
This number reflects only the fuel economy that the
vehicle has right now and will change frequently as
driving conditions change. Unlike average fuel
economy, this menu item cannot be reset.
GAL FUEL USED/Fuel Used: If you select this item,
the number of gallons of fuel used since the last reset of
this menu item is displayed.
To reset GAL FUEL USED using the base audio system,
press the CLR button located in the center of the INFO
button to the right of the screen. The display will return
to zero.
To reset Fuel Used using the Navigation system, press
and hold the multi
-function button that corresponds to
the Reset prompt in the upper right of the display. The
display will return to zero.

2-104
MILES RANGE/Fuel Range: If you select this item,
the approximate number of remaining miles or
kilometers you can drive without refueling is displayed.
This estimate is based on the current driving conditions
and will change if the driving conditions change. For
example, if you are driving in traffic making frequent
stops, the display may read one number, but if you enter
the freeway, the number may change even though you
still have the same amount of gas in the gas tank. This is
because different driving conditions produce different
fuel economies. Generally, freeway driving produces
better fuel economy than city driving.
If your vehicle is low on fuel, the Low Fuel Level
message will be displayed. See ªLow Fuel Level
Messageº in the Index for more information.
AVG MPH/Average Vehicle Speed: If you select this
item, the average speed of the vehicle is displayed in
miles per hour (mph) or kilometers per hour (km/h).
This average is calculated based on the various vehicle
speeds recorded since the last reset of this menu item.
To reset AVG MPH using the base audio system, press
the CLR button located in the center of the INFO button
to the right of the screen. The display will return to zero.To reset the Average Vehicle Speed using the Navigation
system, press and hold the multi
-function button that
corresponds to the Reset prompt in the upper right of the
display. The display will return to zero.
TIMER/Timer: If you select this item, a timing feature
is displayed. The timer functions like a stopwatch in that
you can record the time it takes to travel from one point
to another.
To use the timer, you must first turn it on. To turn on the
timer using the base audio system, press the CLR button
located in the center of the INFO button to the right of
the screen once. To turn on the timer using the
Navigation system, press the multi
-function button next
to the On/Off menu item in the upper right of the
display. The display for both systems will read 00:00:00
TIMER ON and begin counting.
Press the button(s) again to turn the timer off. When the
timer is off, the display will show the timer value and
TIMER OFF. The timing feature will stop.
To reset the timer using the base audio system, turn off
the timer and then press and hold the CLR button. The
display will return to zero.
To reset the timer using the Navigation system press and hold
the multi
-function button next to the Reset prompt in the
upper right of the display. The display will return to zero.

2-106
DIC Messages
These messages will appear if there is a problem sensed
in one of your vehicle's systems. The text messages are
the same for both the base audio and Navigation systems
unless otherwise indicated. The symbols, however,
appear only on the Navigation system display.
You must acknowledge a message to clear it from the
screen for further use. To clear a message, do one of the
following:

Using the Base audio system, press CLR.

Using the Navigation system, press the
multi
-function button next to the OK prompt.
Be sure to take any message that appears on the screen
seriously and remember that clearing the message will
only make the message disappear, not the problem.Battery Not Charging
This symbol appears
with the Battery Not
Charging message.
When this message appears on the display, there is a
problem with the generator and battery charging
systems. Have the electrical system checked by your
dealer as soon as possible.

2-107
Battery Saver Active
This symbol appears
with the Battery Saver
Active message.
This message appears when the system detects that the
battery voltage is dropping beyond a reasonable level.
The battery saver system will start reducing certain
features of the vehicle that you may not be able to
notice. At the point that the features are disabled, this
message is displayed. It means that the vehicle is trying
to save the charge in the battery.
Turn off all unnecessary accessories to allow the battery
to recharge.
The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by pressing
the INFO button until you find BATTERY VOLTS
(base audio system) or by selecting Battery Voltage
from the Vehicle Info menu (Navigation system).Battery Voltage HighThis symbol appears
with the Battery Voltage
High message.
This message indicates that the electrical charging
system is overcharging the battery. When the system
detects that the battery voltage is above approximately
16 volts, this message will be displayed.
To reduce the charging overload, use the vehicle's
accessories. Turn on the exterior lamps and radio, set the
climate control on AUTO and the fan speed on the
highest setting, and turn the rear window defogger on.
The normal battery voltage range is 11.5 to 15.5 volts
when the engine is running. You can monitor battery
voltage on the DIC by pressing the INFO button until
you find BATTERY VOLTS (base audio system) or by
selecting Battery Voltage from the Vehicle Info menu
(Navigation system).

2-108
Battery Voltage Low
This symbol appears
with the Battery Voltage
Low message.
This message will appear when the electrical system
is charging less than 10 volts or if the battery has
been drained.
If this message appears immediately after starting, it is
possible that the generator can still recharge the battery.
The battery should recharge while driving but may take
a few hours to do so. Consider using an auxiliary
charger (be sure to follow the manufacturer's
instructions) to boost the battery after returning home or
to a final destination.
If this message appears while driving or after starting
your vehicle and stays on, have it checked immediately
to determine the cause of this problem.
To help the generator recharge the battery quickly, you
can reduce the load on the electrical system by turning
off the accessories.The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by pressing
the INFO button until you find BATTERY VOLTS
(base audio system) or by selecting Battery Voltage
from the Vehicle Info menu (Navigation system).
Change Engine Oil
This symbol appears
with the Change Engine
Oil message.
This message indicates that the life of the engine oil has
expired and it should be changed within 200 miles. See
ªEngine Oilº in the Index for more information.
When you reset the Change Engine Oil message by
clearing it from the display, you still must reset the
engine oil life monitor separately. For more information
on resetting the engine oil life monitor, see ªOil Life
Monitor, How to Resetº in the Index.

2-115
Passenger Door Ajar
This symbol appears
with the Passenger Door
Ajar message.
When this message appears on the display, it means
that the passenger's side front door was not closed
completely. You should make sure that the door is
closed completely.Personalization Off/Driver Identification
(Navigation System Only)
This symbol appears
with the Personalization
Off message.
When this message appears, the personalization features
previously stored are turned off. If you want your
customized settings to be automatically recalled when
you use the remote keyless entry transmitter or when
you remove the key from the ignition, you must enable
them in the DIC. See ªVehicle Programming and
Personalization Featuresº later in this section for more
information.
This message is also used to identify the
driver (1, 2 or 3) on the Navigation system.

2-126
Accessing the DIC Main Menu
(Base Audio System)
There are two different procedures for accessing the
DIC main menu depending upon whether or not your
vehicle has the optional Navigation system.
To access the main menu of the DIC, do one of the
following:

Using the base audio system, press the TUNE/SEL
knob once. Turn the knob clockwise or
counterclockwise to scroll through the menu items.

Refer to the Navigation Supplement supplied with
your vehicle for more information on the accessing
DIC main menu and descriptions of the menu items
for the Navigation system.
DIC Main Menu
The DIC main menu for the base audio system consists
of the following menu items:


BASS - MID - TREBLE


EQ

DSP

AV C

H/A

AUTO STORE

PTY

TA

RDS MSG

AF

SEEK LOCAL/DISTANT

ENGLISH UNITS/METRIC UNITS

TCS

SET CLOCK

SETUP

2-127
DIC Main Menu Item Descriptions
(Base Audio System)
The following descriptions are for the base audio
system. For information pertaining to the Navigation
audio system, see ªAudio Systemº in the Index of the
Navigation Supplement supplied with your vehicle.
BASS - MID (Midrange) - TREBLE: This
menu item allows you to adjust the levels for the bass,
midrange, treble, balance, and fader features of the
audio system. For more information, see ªAudio
Systemsº in the Index.
EQ (Equalizer): This menu item allows you to
choose among five preset equalizations for the audio
system. See ªEqualizerº in the Index for more
information.
DSP (Digital Signal Processing): This menu item
allows you to select the DSP type that you want on the
audio system. You may choose Normal, Talk, Spacious,
Rear Seat or Driver Seat. Press the TUNE/SEL knob to
scroll through these choices. Once the desired choice is
displayed, turn the knob to set your DSP choice and
continue scrolling through the main menu.
See ªDSPº in the Index for more information.AVC (Automatic Volume Compensation): This menu
item allows you to turn the AVC feature on and off.
Press the TUNE/SEL knob once to turn AVC on and off.
When AVC is on, an X will be in the box next to AVC
on the menu. The X disappears when AVC is off.
See ªAVCº in the Index for more information.
H/A (Home/Away Preset Stations): This menu item
allows you to switch back and forth between your home
and away preset radio stations. Press the TUNE/SEL
knob to switch between home and away.
See ªHome and Away Preset Stationsº in the Index for
more information.
AUTOSTORE: This menu item allows you to
automatically store radio stations with the strongest
signals as presets. See ªAudio Systemsº in the Index for
more information.
PTY (Program
-Type Mode): This menu item allows
you to select radio stations based on preset
program
-types. To turn the PTY feature on, press the
TUNE/SEL knob once. When PTY is on, an X will be in
the box next to PTY on the menu. The X disappears
when PTY is off.
See ªAudio Systemsº in the Index for more information.

2-130
Vehicle Programming and
Personalization Features
Your vehicle is equipped with personalization that
allows you to program certain features to a preferred
setting for up to two people. The number of
programmable features varies depending upon which
model of the vehicle is purchased.
On all vehicles, features such as climate control settings,
radio preset settings, exterior lighting at unlock, remote
lock and unlock confirmation, and automatic door locks
have already been programmed for your convenience.
Some vehicles are equipped with additional features that
can be programmed including the seat and outside
rearview mirror position. The optional navigation
system screen preferences will remain at the last set
position.
If your vehicle is equipped with the ability to program
additional personalization features, the driver's
preferences are recalled by pressing the unlock button
on the remote keyless entry transmitter, 1 or 2, or
by pressing the appropriate memory button, 1 or 2,
located on the driver's door. Certain features can be
programmed not to recall until the key is placed in the
ignition. To change feature preferences you must use
one of the following procedures.
Entering the Personalization Menu
To enter the feature programming mode, use one of the
following procedures:
Base Audio System
1. Turn the ignition to ON, but do not start the engine.
Make sure an automatic transmission is in PARK (P)
or a manual transmission has the parking brake set.
2. If your vehicle has memory settings, press the
appropriate memory button, 1 or 2, located on the driver's
door armrest. The DIC display will show either Driver 1
or 2 depending on which button was selected.
3. Press the TUNE/SEL knob once to access the main
menu of the DIC.
4. Turn the TUNE/SEL knob until SETUP is highlighted.
5. Press the TUNE/SEL knob once to access the
SETUP menu.
6. Scroll to the feature you want to change, and press
the TUNE/SEL knob to turn the feature on or off.
If the feature is turned on, a check mark will appear
next to the feature name.
If none of the personalization items are turned on,
turn on the personalization menu by pressing the
TUNE/SEL knob. The list of features will then
appear, and you can repeat Step 6.

2-131
Navigation System
1. Turn the ignition to ON without the engine running.
Make sure an automatic transmission is in PARK (P)
or a manual transmission has the parking brake set.
2. Turn on the Navigation/audio system by pressing the
PWR/VOL knob located to the lower left of the
display once.
3. Access the DIC main menu by pressing the MAIN
button located to the lower left of the display.
4. Press the multi
-function button next to Feat Prog to
access the Feature Programming menu.
5. Press the TUNE/SEL knob to turn on the
Personalization features. An X will appear in the box
to the left when Personalization is turned on.
Personalization Features
The following choices are available for programming
using both the Base audio and Navigation systems
unless otherwise indicated.
Personalization Name
This feature allows you to type in a name that will
appear on the DIC display whenever the corresponding
remote keyless entry transmitter is used or one of the
buttons on the driver's door armrest (1 or 2) is pressed.
If a customized name is not programmed, the system
will show Driver 1 or Driver 2 to correspond with the
numbers on the back of the remote keyless entry
transmitters.
To program a name, use one of the following
procedures: