CD changer CADILLAC CTS 2003 1.G Owners Manual

2-46
Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:

Turn and Lane
-Change Signals

Headlamps

Headlamp High/Low Beam
-Changer

Flash
-To-Pass Feature

Fog Lamps
For more information on the exterior lamps, see
ªExterior Lampsº later in this section.
Turn and Lane-Change Signals
To signal a turn, move the lever all the way up or down.
The lever returns automatically when the turn is
complete.
Arrows on the instrument
panel cluster flash in the
direction of the turn or
lane change.
Raise or lower the lever until the arrow starts to flash to
signal a lane change. Hold it there until the lane change
is complete. The lever returns to its original position
when it's released.
Arrows that flash rapidly when signaling for a turn or
lane change may be caused by a burned
-out signal bulb.
Other driver's won't see the signal.
Replace burned
-out bulbs to help avoid possible
accidents. Check the fuse and for burned
-out bulbs if the
arrow fails to work when signaling a turn. See ªFuses
and Circuit Breakersº in the Index for more information.

2-48
Headlamp High/Low-Beam Changer
Push forward on the turn signal/multifunction lever to
change the headlamps from low to high beam. Pull the
lever back and then release it to change from high to
low beam.
This light on the instrument
panel cluster will be on,
indicating high
-beam usage.
Lamps On Reminder
A warning chime will sound if the exterior lamp control
is left on in either the headlamp or parking lamp
position and the driver's door is opened with the
ignition off.
Flash-To-Pass Feature
This feature allows you to use the high-beam headlamps
to signal the driver in front of you that you want to pass.
Pull and hold the turn signal/multifunction lever toward
you to use. When you do, the following will occur:

If the headlamps are either off, in low
-beam or in
Daytime Running Lamps (DRL) mode, the
high
-beam headlamps will turn on. They'll stay on
as long as you hold the lever there. Release the lever
to turn them off.

If the headlamps are in high
-beam mode, they will
switch to low beam. To return to high
-beam, push
the lever away from you.

2-97
Cruise Control Light
This light comes on
whenever you set your
cruise control.
The light will go out when the cruise control is turned
off. See ªCruise Controlº listed previously in this
section for more information.
Fog Lamp Light
This light will come on
when the fog lamps are
in use.
The light will go out when the fog lamps are turned off.
See ªFog Lampsº listed previously in this section for
more information.
Lamps On Reminder
This light comes on
whenever the parking
lamps are on.
See ªLamps On Reminderº listed previously in this
section for more information.
Highbeam On Light
This light comes on
whenever the high
-beam
headlamps are on.
See ªHeadlamp High/Low
-Beam Changerº listed
previously in this section for more information.

3-22
If an error appears on the display, see ªCompact Disc
Messagesº later in this section.
When a CD is inserted the CD functions will appear on
the display above the pushbuttons, in place of the preset
stations (if programmed). The following explains what
each pushbutton and the SEEK and SCAN buttons will
perform when a CD is playing:
F1 PREV (Previous): Press this pushbutton to seek to
the previous track on the compact disc. Press and hold
this pushbutton to reverse the compact disc. Release it to
return to playing speed.
F2 NEXT: Press this pushbutton to seek to the next
track on the compact disc. Press and hold this
pushbutton to fast forward to another part of the
compact disc. Release it to return to playing speed.
F3 RDM (Random): Press this pushbutton to listen to
the tracks in random, rather than sequential, order.
RANDOM will appear on the display. Press this
pushbutton to turn off random play. RANDOM will
disappear from the display.
F4 RPT (Repeat): Press this pushbutton to listen to
the track that you are currently listening to again.
REPEAT will appear on the display. Press this
pushbutton again to turn off repeat play. REPEAT
will disappear from the display.F6 DISP (Display): Press this pushbutton to display the
time of the track. Press this pushbutton again to remove
the time of the track from the display.

SEEK
: Press the up or the down arrow to seek to
the next or to the previous track on the CD.
 SCAN: Press this button to listen to each track for
10 seconds. The compact disc will go to a track, play for
10 seconds, then go on to the next track. Press this
button again to stop scanning.
(Eject): Press this button, located to the right of the
CD slot, to stop a CD when it is playing or to eject a CD
when it is not playing. Eject may be activated with the
radio off and/or the ignition off.
Using the Six
-Disc Compact Disc Changer
The integral CD player can play the smaller 8 cm compact
discs with a 12 cm adapter. Full
-size compact discs and
the smaller compact discs (with the 12 cm adapter) are
loaded in the same manner. See you dealer for more
information about the 12 cm adapter for using 8 cm discs.
If an error appears on the display, see ªCompact Disc
Messagesº later in this section.
When a CD is inserted the CD functions will appear on
the display above the pushbuttons, in place of the preset
stations (if programmed).

3-28 Audio Steering Wheel Controls
Some audio controls can be adjusted at the steering
wheel. They include the following:
Volume: Turning the
knob increases and
decreases volume.
(Band/Source): Press this button to select AM,
FM1, FM2 or a source, either radio, cassette tape or CD.
The cassette or CD must be loaded to play. Available
loaded sources are shown on the display as a tape or a
CD symbol. (For vehicles with the six
-disc changer
radio
- If none of the audio sources are loaded, and this
button is pressed, NO SOURCE LOADED will appear
on the display.)
(Mute): Press this button to silence the system.
Press it again to turn on the sound. If your vehicle has
the Navigation system, this button does not have a
mute function.
See ªReconfigurable
Steering Wheel Controls
(SWC)º in the Index for
more information on
this feature.