mirror CADILLAC ESCALADE 2019 Convenience & Personalization Guide

2
Review this quick reference guide for an overview of some important features in your Cadillac
Escalade. Some optional equipment described in this guide (denoted by ♦) may not be included in
your vehicle. More information can be found in your Owner's Manual and at my.cadillac.com.Certain restrictions, precautions and safety
procedures apply to your vehicle. Please read
your Owner’s Manual for complete instructions.
INSTRUMENT PANEL



Cruise Control/
Voice Recognition/ Heated Steering Wheel Buttons
Instrument
Panel/Exterior Lamp Controls Head-Up
Display
Controls
♦
Windshield Wipers Lever
Audio Steering
Wheel Controls/
Driver Information Center Controls
Power Tilt/
Telescope Steering Wheel Control Instrument
Cluster/Driver Information Center
Engine Start/Stop Button
4WD
Control
Memory
Seat
Buttons Infotainment
System Touch
Screen
Heated/Cooled Seat Buttons Audio
System
Controls
Climate
Controls
Driver Mode Control/
Adjustable Pedals/
Traction Control and StabiliTrak Buttons Glove Box/Lane Keep
Assist♦/Park Assist/
Automatic Parking Assist♦
Power Mirror Control/ Door Lock Switch/Window Buttons

13
LIGHTING
Off/On
AUTO Automatic
Light Control
Automatically activates
the Daytime Running
Lamps (DRLs) or the
headlamps and other
exterior lamps depend -
ing on outside light
conditions, including
the IntelliBeam
® auto-
matic high-beam system♦.
Parking Lamps
Headlamps
Instrument Panel Brightness
Rotate the thumbwheel to adjust the instrument panel lighting.
DOME LAMPS
OFF
Press to turn off the dome lamps at all
times, even when a door is open.
DOOR
Press to have the dome lamps turn on
automatically when a door is open.
ON
Press to turn on all dome lamps.
See Lighting in your Owner's Manual.
WINDSHIELD WIPERS
Fast Wipes
Slow Wipes
INT Intermittent
Rotate the band
to adjust the delay
between wipes. The
wipers activate more
often as the band is
rotated upward.
Auto –
Rainsense™ On/Off
Press to turn the Rainsense wipers on/off. Use the INT band
to adjust the wiper cycling based on the amount of moisture on
the windshield. Rotate the band upward to increase the moisture
sensitivity setting and the wipers will cycle more frequently.
OFF
Single Wipe
Washer Fluid
Push the paddle forward to wash the windshield.
Rear OFF-INT-ON
Slide the switch to activate the rear wiper.
Rear Washer Fluid
Press the button on the end of the lever to spray washer fluid on the
rear window and rear camera mirror lens♦.
See Instruments and Controls in your Owner's Manual.
♦ Optional equipment

15
SURROUND VISION
FRONT AND REAR PARK ASSIST
The Surround Vision system displays a rear or front camera view
along with a view of the area surrounding the vehicle on the infotain -
ment screen when the vehicle is in Reverse or Drive below 5 mph.
REAR CROSS-TRAFFIC ALERT♦
When the vehicle is in Reverse, the Rear Cross-Traffic Alert system
warns of cross-traffic coming in either direction by displaying a red
alert on the infotainment screen and the left or right side of the
Safety Alert Seat pulses or beeps sound (if selected).
To turn the Surround Vision System guidance lines or Rear Park
Assist symbols on or off, go to Settings > Rear Camera.
See Driving and Operating in your Owner's Manual.
\b30',%*-5R1.##".0)',%+,#34#01A2&#1712#+.0-4'"#1^"'s -
tance to closest object” information on the \b0'4#0
,$-0+2'-,
Center and the Safety Alert Seat pulses or a beep sounds (if select -
ed). When an object is very close, the Safety Alert Seat pulses or a
continuous beep sounds (if selected).
To turn the system on or off, press the Park Assist button
on the right side of the infotainment screen.
See Driving and Operating in your Owner's Manual.
AUTOMATIC PARKING ASSIST
Automatic Parking Assist steers the vehicle to help you park in
parallel or perpendicular spaces while you follow commands and
control the gear selection, acceleration and braking. The system is
available when vehicle speed is below 18 mph.
1. Press the Automatic Parking Assist button on the right side
of the infotainment screen. A beep sounds and a parking assist
display is shown on the infotainment screen. The system will
begin searching for a large enough parking space.
2. To switch between parallel and perpendicular parking, touch
the Parking Type screen button during the search process.
3. The system searches for parking spaces to the right of the

vehicle. To search for a parking space to the left, touch the
Select Side screen button.
4. Once a space is found, shift the vehicle into Reverse or \b0'4#1
directed, follow the commands on the infotainment screen and
apply the accelerator or brake as needed. The steering wheel
will briefly vibrate as a reminder to remove your hands. Parking
Complete will be displayed and a beep will sound when the
parking maneuver is complete.
See Driving and Operating in your Owner's Manual.
♦ Optional equipment
The Rear Camera Mirror
provides a wider, less
obstructed field of view of
the area behind the vehicle
than a traditional rearview
mirror. It displays a rear
camera view that is helpful
when the driver's view is
obstructed, for example, by
rear seat passengers or a rear seat entertainment screen.

Pull or push the lever (A) at the
bottom of the
mirror to
turn the video
display on or off. When off, the mirror is a
normal rearview mirror.
To adjust the brightness of the display, press and release
the button (B) on the top back of the mirror without cov -
ering the light sensor. There are 5 brightness
settings.
See Keys, Doors and Windows in your Owner's Manual.
REAR CAMERA MIRROR♦
B
A

SET MEMORY POSITIONS
With the vehicle in Park and the

ignition On or in Accessory mode:
1. Adjust the power driver’s seat,
power adjustable pedals, power
outside mirrors, and power tilt/
telescopic steering column to the
desired positions.
2. Press and release the SET button.
A beep will sound. Immediately
press and hold
button 1 until two
beeps sound.
3. Repeat the steps using button 2 for a second driver.
To store driver
\b11#2A"(312 *#.#"*1,"12##0',%!-*3+,

positions for more clearance when exiting the vehicle, repeat steps
1 and 2 using the
EXIT button.
RECALL POSITIONS
Press and hold button 1 or 2 or the EXIT button until the
seat, pedals, mirrors and steering column reach the set position.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned On/Off (for exit recall,
the driver
\b1"--0+312 #-.#,#"K.
To set the Auto Memory Recall or Easy Exit Options, go to
Settings > Vehicle > Comfort and Convenience > Auto Memory
Recall or Easy Exit Options.
See Seats and Restraints in your Owner's Manual.
18
POWER FRONT SEATS
SEAT ADJUSTMENTS
A. Seat Cushion Adjustment
Move the front horizontal

control to move the seat for -
ward or rearward, or to tilt,
raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to
recline or raise the seatback.
C. Lumbar Adjustment
Move the rear control fore/aft to increase/decrease lumbar

support or up/down to raise/lower the lumbar location.
ADDITIONAL SEAT ADJUSTMENTS (PLATINUM MODEL)
D. Feature Select Control
Press and release the control
to display the seat adjustment
features on the infotainment
screen. Press and hold to scroll
through the adjustments.
E. 4-Way Control Pad
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the
selected feature.
F. Massage On/Off
With the ignition on, press to recall the last massage type and
intensity.
A
F D
C B
E