dead battery CADILLAC ESCALADE EXT 2009 3.G Owners Manual
[x] Cancel search | Manufacturer: CADILLAC, Model Year: 2009, Model line: ESCALADE EXT, Model: CADILLAC ESCALADE EXT 2009 3.GPages: 546, PDF Size: 4.43 MB
Page 427 of 546

Do not connect positive (+) to negative (β)oryou
will get a short that would damage the battery
and maybe other parts too. And do not connect the
negative (β) cable to the negative (β) terminal on
the dead battery because this can cause sparks.
6. Connect the red
positive (+) cable to the
positive (+) terminal
of the vehicle with the
dead battery. Use
a remote positive (+)
terminal if the
vehicle has one.
7. Do not let the other end touch metal. Connect it to
the positive (+) terminal of the good battery. Use a
remote positive (+) terminal if the vehicle has one.8. Now connect the black negative (β) cable to the
negative (β) terminal of the good battery. Use a
remote negative (β) terminal if the vehicle has one.
Do not let the other end touch anything until the
next step. The other end of the negative (β) cable
does not go to the dead battery. It goes to a
heavy, unpainted metal engine part or to the remote
negative (β) terminal on the vehicle with the dead
battery.
9. Connect the other end of the negative (β) cable to
the remote negative (β) terminal, on the vehicle with
the dead battery.
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle that had the dead battery. If
it will not start after a few tries, it probably needs
service.
6-43
Page 428 of 546

Notice:If the jumper cables are connected or
removed in the wrong order, electrical shorting may
occur and damage the vehicle. The repairs would
not be covered by your warranty. Always connect
and remove the jumper cables in the correct
order, making sure that the cables do not touch
each other or other metal.
A. Heavy, Unpainted Metal Engine Part or Remote
Negative (β) Terminal
B. Good Battery or Remote Positive (+) and Remote
Negative (β) Terminals
C. Dead Battery or Remote Positive (+) TerminalTo disconnect the jumper cables from both vehicles do
the following:
1. Disconnect the black negative (β) cable from the
vehicle that had the bad battery.
2. Disconnect the black negative (β) cable from the
vehicle with the good battery.
3. Disconnect the red positive (+) cable from the
vehicle with the good battery.
4. Disconnect the red positive (+) cable from the other
vehicle.
5. Return the remote positive (+) terminal cover, if the
vehicle has one, to its original position.
Jumper Cable Removal
6-44