height adjustment CADILLAC STS 2007 1.G Owners Manual
[x] Cancel search | Manufacturer: CADILLAC, Model Year: 2007, Model line: STS, Model: CADILLAC STS 2007 1.GPages: 560, PDF Size: 2.92 MB
Page 7 of 560
Front Seats..................................................... 9
Power Seats................................................. 9
Power Lumbar.............................................. 9
Heated Seats.............................................. 10
Heated and Ventilated Seats....................... 11
Power Reclining Seatbacks......................... 11
Head Restraints.......................................... 13
Rear Seats.................................................... 14
Heated Seats.............................................. 14
Rear Seat Pass-Through Door.................... 14
Safety Belts.................................................. 15
Safety Belts: They Are for Everyone........... 15
Questions and Answers About
Safety Belts............................................. 19
How to Wear Safety Belts Properly............. 20
Driver Position............................................. 21
Shoulder Belt Height Adjustment................. 29Safety Belt Use During Pregnancy.............. 30
Right Front Passenger Position................... 30
Rear Seat Passengers................................ 31
Rear Safety Belt Comfort Guides................ 34
Safety Belt Pretensioners............................ 37
Safety Belt Extender................................... 37
Child Restraints............................................ 38
Older Children............................................. 38
Infants and Young Children......................... 40
Child Restraint Systems.............................. 44
Where to Put the Restraint.......................... 48
Lower Anchors and Tethers for
Children (LATCH).................................... 50
Securing a Child Restraint in a Rear
Seat Position........................................... 57
Securing a Child Restraint in the
Right Front Seat Position......................... 59
Section 1 Seats and Restraint Systems
7
Page 21 of 560
Driver Position
Lap-Shoulder Belt
The driver has a lap-shoulder belt. Here is how
to wear it properly.
1. Close and lock the door.
2. Adjust the seat so you can sit up straight.
To see how, see “Seats” in the Index.3. Pick up the latch plate and pull the belt across
you. Do not let it get twisted.
The shoulder belt may lock if you pull the belt
across you very quickly. If this happens, let
the belt go back slightly to unlock it. Then pull
the belt across you more slowly.
4. Push the latch plate into the buckle until
it clicks.
Pull up on the latch plate to make sure it is
secure. If the belt is not long enough,
seeSafety Belt Extender on page 37.
Make sure the release button on the buckle is
positioned so you would be able to unbuckle
the safety belt quickly if you ever had to.
5. Move the shoulder belt height adjuster to the
height that is right for you. Improper shoulder
belt height adjustment could reduce the
effectiveness of the safety belt in a crash. See
Shoulder Belt Height Adjustment on page 29.
21
Page 29 of 560
To unlatch the belt, just push the button on the
buckle. When the safety belt is unbuckled or when
the vehicle is turned off, the tension reducer will
deactivate. The belt should go back out of the way.
Before you close the door, be sure the belt is
out of the way. If you slam the door on it, you can
damage both the belt and your vehicle.
Shoulder Belt Height Adjustment
Before you begin to drive, move the shoulder belt
height adjuster to the height that is right for you.
Adjust the height so that the shoulder portion of
the belt is centered on your shoulder. The
belt should be away from your face and neck, but
not falling off your shoulder. Improper shoulder
belt height adjustment could reduce the
effectiveness of the safety belt in a crash.
To move it down, press
the release button (A)
and move the height
adjuster to the desired
position. You can move
the height adjuster up
just by pushing up on the
shoulder belt guide.
After you move the height adjuster to where you
want it, try to move it down without pressing the
release button to make sure it has locked into
position.
29
Page 407 of 560
{CAUTION:
The brake wear warning sound means that
soon the brakes will not work well. That
could lead to an accident. When you hear
the brake wear warning sound, have your
vehicle serviced.
Notice:Continuing to drive with worn-out
brake pads could result in costly brake repair.
Some driving conditions or climates may cause
a brake squeal when the brakes are rst applied or
lightly applied. This does not mean something is
wrong with your brakes.
Properly torqued wheel nuts are necessary to help
prevent brake pulsation. When tires are rotated,
inspect brake pads for wear and evenly tighten
wheel nuts in the proper sequence to GM torque
speci cations.
Brake linings should always be replaced as
complete axle sets.
Brake Pedal Travel
See your dealer if the brake pedal does not return
to normal height, or if there is a rapid increase in
pedal travel. This could be a sign of brake trouble.
Brake Adjustment
Every time you apply the brakes, with or without
the vehicle moving, your brakes adjust for wear.
Replacing Brake System Parts
The braking system on a vehicle is complex. Its
many parts have to be of top quality and work well
together if the vehicle is to have really good
braking. Your vehicle was designed and tested with
top-quality GM brake parts. When you replace parts
of your braking system — for example, when your
brake linings wear down and you need new ones
put in — be sure you get new approved
replacement parts. If you do not, your brakes may
no longer work properly. For example, if someone
puts in brake linings that are wrong for your vehicle,
the balance between your front and rear brakes can
change — for the worse. The braking performance
you have come to expect can change in many other
ways if someone puts in the wrong replacement
brake parts.
407