AUX CHEVROLET ASTRO 1997 2.G Owners Manual
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 1997, Model line: ASTRO, Model: CHEVROLET ASTRO 1997 2.GPages: 404, PDF Size: 20.63 MB
Page 4 of 404
Downloaded from www.Manualslib.com manuals search engine n-n
1-1
GENERAL MOTORS, GM, the GM Emblem,
CHEVROLET, the CHEVROLET Emblem and the
name ASTRO are registered trademarks
of General
Motors Corporation.
This manual includes the latest information at the time it
was printed. We reserve
the right to make changes in the
product after that time without further notice. For
vehicles first sold in Canada, substitute the name
“General Motors
of Canada Limited” for Chevrolet
Division whenever it appears
in this manual.
Please keep this manual
in your vehicle, so it will be
there if
you ever need it when you’re on the road. If you
sell the vehicle, please leave this manual in it so the new
owner can use
it.
Litho in U.S.A.
C97 10 B First Edition
WE SUPPORT
VOLUNTARY TECHNICIAN
CERTIFICATION THROUGH
National Institute for AUTOMOTIVE SERVICE EXCELLENCE
We support voluntary
technician certification.
For Canadian Owners Who Prefer a
French Language Manual:
Aux propri6taires canadiens: Vous pouvez vous
procurer un exemplaire de ce guide en frarqais chez
votre concessionaire
ou au:
DGN Marketing Services Ltd.
1500 Bonhill Rd.
Mississauga, Ontario L5T lC7
@Copyright General Motors Corporation
1996
All Rights Reserved
ii
Page 126 of 404
Downloaded from www.Manualslib.com manuals search engine Visor Vanity Mirror (If Equipped)
Some visors have mirrors built in, with or without
lamps. Just lift the mirror cover
on each visor to turn the
lamps on, if you have them.
Lighted mirrors also have a density switch
to make the
mirror lamps brighter or dimmer.
Accessory Power Outlets (Option)
If you have accessory power outlets, you can plug in
auxiliary electrical equipment. Just pull up from the
bottom of the door and follow the proper installation
instructions that are included with any electrical
equipment that you install.
Passenger vans also have
two accessory power
outlets located
on the passenger’s side of the engine
cover console.
Another accessory power outlet
is located on the
driver’s side behind the third row seating position,
near the floor.
These circuits are protected
by a fuse and have
maximum current levels.
NOTICE:
When using the accessory power outlets, maximum
electrical load must not exceed
25 amps. Always
turn
off any electrical equipment when not in use.
Leaving electrical equipment on
for extended
periods
will drain your battery.
2-52
Page 163 of 404
Downloaded from www.Manualslib.com manuals search engine TAPE AUX: Press this button to return to the tape
player when playing the radio. The lighted arrow
will
appear and show the direction of play when a tape is in
the active mode.
EJECT: Press this button to remove the tape. The radio
will now play. EJECT can be used with either the
ignition or radio off. To load a cassette tape with the
ignition or radio
off, press EJECT before loading the
cassette.
If you leave a cassette tape in the player while
listening
to the radio, it may become warm.
CLN:
If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean
it as soon as possible to
prevent damage to the tapes and player. See “Care of
Your Cassette Tape Player” in the Index. After you clean
the player, press and hold EJECT
for five seconds to
reset the CLN indicator. The radio will display
--- to
show the indicator was reset.
CD Adapter Kits
It is possible to use a CD adapter kit with your cassette
tape player after activating the bypass feature on your
tape player.
To activate
the bypass feature, the ignition must be on.
Turn your radio off. Press TAPE AUX and hold for
three seconds. After three seconds, the tape symbol
in
the display will flash for two seconds indicating the
feature is active. Insert the adapter cassette again.
It will
power up the radio and begin playing.
This override routine will remain active
until EJECT
is pressed.
3-17
Page 169 of 404
Downloaded from www.Manualslib.com manuals search engine FWD (6): Press and hold this button to advance rapidly
within a track.
You will hear the disc selection play at
high speed while you press the FWD button. This allows
you to listen and find out when the disc is at the desired
selection. Release FWD
to resume playing.
RECALL: Press this button to see what track is playing.
Press
it again within five seconds to see how long the
CD has been playing that track. Elapsed time is
displayed in minutes and tenths
of a second. The track
number
will also appear when a new track begins to
play. Press RECALL again to return to the time display.
AM-FM: While in the CD mode, press this button to
stop playing the CD and play the radio. The CD symbol
will still display but the word
CD will be replaced with
either
AM, FM 1 or FM2. (If the radio is turned off, the
disc stays
in the player and will resume playing at the
point where it stopped.)
CD AUX: To switch between the player and the radio
when
a disc is playing, press the AM-FM button. To
return to the player, press CD AUX. When a disc is
playing, the letters CD and the
CD symbol will appear
on the display. (If the radio is turned off, the disc stays
in the player and will resume playing at the point where
it stopped.)
EJECT Press this button to eject the disc from the
player and play the radio. When the same or a new disc
is inserted, the disc will start playing
on track one. If a
compact disc is
left sitting in the opening for more than
a few seconds,
the player will pull the CD back in. The
radio will continue playing. When the ignition
is off,
press this button to load a CD. If you leave a compact
disc in the player while listening
to the radio, it may
become warm.
3-23
Page 171 of 404
Downloaded from www.Manualslib.com manuals search engine PREV (1): Press this button to go back to the start of
the current track if more than eight seconds have played.
Press PREV again
to go to the previous track on
the disc.
NEXT (3): Press this button to advance to the next track
on the disc.
REV (4): Press and hold this button to quickly reverse
within a track. As the CD reverses, elapsed time will be
displayed to help you find the correct passage.
FWD (6): Press and hold this button to quickly advance
within a track. As the CD advances, elapsed time will be
displayed to help you find the correct passage.
SEEK: Press the left arrow while playing a CD to go
back
to the start of the current track. It will go back to
the current track
if more than eight seconds have played.
Press the left arrow again to
go to previous tracks. Press
the right arrow to go to the next higher track on the disc.
RANDOM: Press P.SCAN to enter the random play
mode. RANDOM
will appear on the display. While in
this mode, the tracks on the discs will be played in
random order. If you press SEEK, PREV or NEXT
while
in the random mode, the previous or next track
will be scanned randomly. Press P.SCAN again to turn
off RANDOM and return to normal operation.
RECALL: Press this button to see what track is
currently playing. Press RECALL again
within five
seconds
to see how long the track has been playing.
When a new track starts
to play, the track number will
also appear. Press RECALL a third time and the time of
day will be displayed.
TAPE AUX: With a disc loaded in the player and the
radio playing, press this button once
to play the compact
disc. To return
to playing the radio, press AM-FM. If
both a cassette tape and CD are loaded, press TAPE
AUX to switch between the tape and compact disc.
EJECT Press this button on the remote player to eject a
compact disc. If you leave a compact disc in the player
while listening
to the radio, it may become warm.
3-25
Page 215 of 404
Downloaded from www.Manualslib.com manuals search engine Trailer Wiring Harness
If you have the optional trailering package, your vehicle
will have an eight-wire harness, including
the center
high-mounted stoplamp battery feed wire. The harness
is stored on the passenger side of
the vehicle near the
rear wheel well. This harness has a
30 amp battery feed
wire and no connector, and should be wired by
a
qualified electrical technician. After choosing an
aftermarket trailer mating connector pair, have the
technician attach one connector to the eight-wire trailer
harness and the other connector to the wiring harness
on
the trailer. Be sure the wiring harness on the trailer is
taped or strapped
to the trailer’s frame rail and leave it
loose enough so the wiring doesn’t bend or break, but
not
so loose that it drags on the ground. The eight-wire
harness must be routed out
of your vehicle between the
rear door and the floor, with enough
of the harness left
on both sides so that the trailer or the body won’t pull it.
If you do not have the optional trailering package, your
vehicle will still have a trailering harness. The harness is
located near the passenger’s side rear wheel well. It
consists of six wires that may be used by after-market
trailer hitch installers. The technician can use the
following color code chart when connecting the wiring
harness
to your trailer.
Brown: Rear lamps.
Yellow: Left stoplamp and turn signal.
0 Dark Green: Right stoplamp and turn signal.
White (Heavy Gage): Ground.
Light Green: Back-up lamps.
White (Light Gage): Center High-Mounted Stoplamp.
Blue: Auxiliary circuit (eight-wire harness only).
0 Orange: Fused auxiliary (eight-wire harness only).
Store the harness in its original place. Wrap the harness
together
and tie it neatly so it won’t be damaged.
4-39
Page 320 of 404
Downloaded from www.Manualslib.com manuals search engine Underhood Electrical Center
--EKE
_73
000
;;z () (-) (-)
(-1 (-) (,,,,,II)
(7)
(71
(7)
(TI
(7)
(-1
(-1
m
The underhood electrical center is located toward the
rear
of the engine compartment on the driver's side.
Lift the hood and open the cover
to gain access to this
fuse block.
Feed Usage
AUX B . . . . . . . . . . . Upfitter Battery Feed
AUX A . . . . . . . . . . . . Upfitter Ignition Feed
Relay
A/C Relay
IGN Relay
Starter Enable Relay
A/C Enable Relay
Empty Relay
Fuel
Pump Relay
6-64
Page 321 of 404
Downloaded from www.Manualslib.com manuals search engine FuseKircuit Breaker
UPFIT-BATT .......
UPFIT-IGN ........
Spare .............
Fuse Puller*
Spare
.............
Spare .............
ECM-B ............
HORN ............
A/C COMP .........
RR DEFOG ........
ENG-I ............
Usage
Upfitter Battery Power Stud,
Trailer Wiring Harness
Upfitter Ignition Relay
Not used
Not used
Not used
Fuel Pump Relay, VCM,
Oil Pressure Switch/Sender
Horn Relay
A/C Enable Relay
Heater-A/C Control Selector
Switch
Oxygen Sensors
1-4,
Camshaft Position Sensor,
Mass Air Flow Sensor,
Evaporative Emission
Canister Purge Solenoid
Valve, Linear EGR Valve
Solenoid,
VCM
FuseKircuit Breaker
IGN-E ............
ECM-I ......... ~.
LIGHTING ........
BATT .............
IGNA .............
IGN B .............
ABS ..............
A/C ...............
RR HTR/AC ........
Spare .............
Usage
A/C Enable Relay
Fuel Injectors 1-6,
Crankshaft Position Sensor,
VCM, Distributor Ignition
Control Module
Park Lamps Fuse, DRL Fuse,
Headlamp and Panel
Dimmer Switch
I/P Fuse Block Fuses, Power
Seat CB, Stop/Hazard Fuse,
Auxiliary Power Fuse,
Cigarette Lighter Fuse,
Radio, Battery Fuse
Starter Relay, Ignition Switch
Ignition Switch Brake Pressure Module Valve
Blower Motor Resistor,
Blower Relay Auxiliary Heater
A/C Relay
Not used
*A fuse puller is included in the underhood electrical
center.
You will also find spare fuses.
6-65