center console CHEVROLET ASTRO 1997 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine Bucket Seats
If you have rear bucket seats in your vehicle, they will
recline and adjust the same way as the front manual
bucket seats. See “Reclining Seatbacks” earlier
in this
section or
in the Index.
Bench Seats
If you have bench seats in your vehicle, each seat can
carry up to three passengers. They can also be removed
to increase storage space.
The center bench (if not equipped with
a built-in child
restraint) and rear bench seats can be adjusted forward
or rearward by
the lever at the front of the seat. Move
the seat adjustment
lever at the front of the seat
toward the passenger’s side
to unlock it. Slide the seat to
where
you want it. Then
release the lever and try to
move the seat with your
body,
to make sure the seat
is locked into place.
The non-touring center bench seat has
a pivoting
right armrest. The left armrest can also be used as
a
storage compartment.
The optional touring bench seats come with moveable
armrests, individual reclining seatbacks, adjustable
headrests
and a fold-down center console.
1-7

Downloaded from www.Manualslib.com manuals search engine i
To raise or lower the center
console, press the button
between the beverage
holders. Only sit in the
center seating position
when the console is in an
upright position.
For details about headrests, see “Head Restraints”
in
this section.
To adjust your seatback, pull up on the lever on the
lower outside of the seat.
The center bench seatbacks will recline further back
than the rear bench seatbacks.
1-8

Downloaded from www.Manualslib.com manuals search engine Reading Lamps
Press the button near each
lamp to turn the reading
lamps on and off.
The lamps can
also be swiveled to point in the direction
you want.
Installing a Garage Door Opener
If you have a garage door opener, the front
overhead compartment can be used
to conveniently
store the opener.
To install the garage door opener, first open the
compartment door
by pressing the latch forward.
Peel the protective
backing from the
hook
and loop patch.
Press
it firmly to the back of your garage door opener,
as close to the center of the opener as possible.
Center the garage door opener activation button over
the console door button and press the opener firmly
into place.
2-45