DIAGNOSTIC INFORMATION AND PROCEDURES
DIAGNOSTIC STARTING POINT - INSTRUMENT PANEL, GAGES AND CONSOLE
Begin the system diagnosis by reviewing the Symptoms
- Instrument Panel, Gages and Console . Reviewing
the symptom information will help you determine the correct symptom diagnostic procedure when a
malfunction exists.
DIAGNOSTIC SYSTEM CHECK - INSTRUMENT CLUSTER
Test Description
The numbers below refer to the step numbers on the diagnostic table.
1: Lack of communication may be due to a malfunction of the serial data circuits. The specified
procedure will determine the particular condition.
3: The presence of DTCs may be related to an engine electrical condition. The specified procedure will
compile all the available information before tests are performed.
Diagnostic System Check - Instrument Cluster
DIAGNOSTIC TROUBLE CODE (DTC) LIST
Diagnostic Trouble Code (DTC) List
Connector Part Information
AK 32104
1-Way F Metri-Pack 150 Series Sealed (BK)
PinWire ColorCircuit No.Function
1D-GN/WH31Oil Pressure Indicator Control
StepActionYesNo
1
Install a scan tool.
Does the scan tool power up?
Go to Step 2
Go to Scan Tool
Does Not Power Up
in Data Link
Communications
2
1. Turn ON the ignition, with the engine OFF.
2. Attempt to establish communication with the
engine control module (ECM).
Does the scan tool communicate with the ECM?
Go to Step 3
Go to Scan Tool
Does Not
Communicate with
Componentin Data
Link
Communications
3
Select the Display DTCs function for the ECM.
Does the scan tool display DTC P0461, P0462, P0463
or P0464?Go to Diagnostic
Trouble Code
(DTC) List
Go to Symptoms -
Instrument Panel,
Gages and Console
DTCDiagnostic ProcedureModules
2005 Chevrolet Aveo
2005 ACCESSORIES & EQUIPMENT Instrument Panel, Gages, & Console - Aveo
Microsoft
Friday, July 31, 2009 1:07:02 PMPage 13 © 2005 Mitchell Repair Information Company, LLC.
