Fig. 28: View of Headliner Along Rear Window and Plastic Retainers
Courtesy of GENERAL MOTORS CORP.
9. Remove the left and the right rear quarter upper trim panels.
10. Remove the sunroof molding, if equipped.
11. Remove the plastic retainers in the headliner along the rear window.
12. Slide and tilt both front seats forward.
13. Pull the headliner down and turn it 45 degrees.
14. Remove the headliner through a rear door.
Installation Procedure
2005 Chevrolet Aveo
2005 ACCESSORIES & EQUIPMENT Interior Trim - Aveo
Microsoft
Friday, July 31, 2009 1:08:27 PMPage 29 © 2005 Mitchell Repair Information Company, LLC.
Fig. 29: View of Headliner Along Rear Window and Plastic Retainers
Courtesy of GENERAL MOTORS CORP.
1. Recline both front seats.
2. Tilt the headliner on its side and slide it through a rear door.
3. Tilt and rotate the headliner until it is in position. Push it in place until the seals around the doors cover
the edges of the headliner.
4. Install the plastic retainers alon
g the rear window.
2005 Chevrolet Aveo
2005 ACCESSORIES & EQUIPMENT Interior Trim - Aveo
Microsoft
Friday, July 31, 2009 1:08:27 PMPage 30 © 2005 Mitchell Repair Information Company, LLC.
Fig. 57: View of Rear Upper Trim Paned & Rear Rocket Trim Panel
Courtesy of GENERAL MOTORS CORP.
1. Install the rear quarter upper trim panel.
2. Install the rear rocker trim panel.
Refer to Door Sill Plate Replacement
- Rear .
3. Install the seat belt from the rear quarter upper trim panel.
TRIM PANEL REPLACEMENT - REAR WINDOW SHELF
Removal Procedure
2005 Chevrolet Aveo
2005 ACCESSORIES & EQUIPMENT Interior Trim - Aveo
Microsoft
Friday, July 31, 2009 1:08:28 PMPage 57 © 2005 Mitchell Repair Information Company, LLC.
Fig. 59: View of Deck Lid Sill Plate Cover
Courtesy of GENERAL MOTORS CORP.
1. Install the rear deck lid sill plate cover with the plastic retaining clips.
2. Install the rear seatback. Refer to Seat Back Replacement
- Rear in Seats.
DESCRIPTION AND OPERATION
INTERIOR TRIM PANEL DESCRIPTION AND OPERATION
The interior trim panels are molded plastic and fasten with screws or plastic clips.
Pressure Relief Vent
When all the windows are closed and the ventilations system is ON, the addition of outside air to the interior of
the vehicle causes a positive pressure within the vehicle. In order to relieve the pressure, air is released through
2 pressure relief vents. The pressure relief vents are located at the rear quarter of the vehicle, behind the bumper
fascia.
Floor Console
The floor console fits over the tunnel in the floor of the vehicle and extends from under the center of the
instrument panel to the rear seat area. The front portion of the console contains the cigar lighter and the
transaxle shift lever. The rear portion of the console contains the parking brake lever, the power window
switches, if equipped, and a cupholder.
The sensin
g and diagnostic module (SDM) for the air bag system is located under the front part of the console.
2005 Chevrolet Aveo
2005 ACCESSORIES & EQUIPMENT Interior Trim - Aveo
Microsoft
Friday, July 31, 2009 1:08:28 PMPage 59 © 2005 Mitchell Repair Information Company, LLC.
