lock CHEVROLET BLAZER 1994 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine These symbols are important for you and your passengers whenever your
vehicle
is driven:
1 I
Fasfen Safety Door LocWUnlock
Belts
These symbols have to do with your lights:
Master Lighting Turn Signal
Switch Direction
pf
Parking Lights Daytime
Running Lights
A
Hazard Warning
Flasher Headlight
High Beam
$0
fog Lights
v111 . ..

Downloaded from www.Manualslib.com manuals search engine These symbols are on some of your controls:
Windshield Windshield Windshield
Rear Window
Wiper Washer
Defroster
Wiper
Rear Wlndow Rear Window Ventilating Fan
Off
Washer Defroster
These symbols are usea on warning and indicator lights:
0
Engine Coolant
Battery Charging Fuel Engine Oil
Temperature System Pressure
Brake Brake Shift Light
4- Wheel
(Digital Cluster) (Standard Cluster) Anti-Lock
ix

Downloaded from www.Manualslib.com manuals search engine Seats and Seat Controls
This section tells you about the seats-how to adjust them, and fold them up
and down.
Front Seats
Manual Front Seat
Move the lever under
the front of the seat
left to unlock
it. Slide
the seat to where
you
want it. Then release
the lever and try to
move the seat
with
your body to make
sure the seat
is locked
into place.
1-2

Downloaded from www.Manualslib.com manuals search engine Front Seatback Latches (Two-Door Models)
The front seatback folds forward to let people get into the back seat.
Reclining Front Seatbacks
(Bucket Seats
or 60/40 Split-Bench)
To fold a front
seatback forward,
push the seatback
toward the rear as you
lift this latch. Then the
seatback will fold
forward. The latch
must be down for the
seat to work properly.
To adjust the seatback,
lift the lever
on the
outer side of the seat.
Release the lever to lock the seatback
where you want it.
Pull up on the lever
I
and the seat will go to
4 an upright position.
1-4

Downloaded from www.Manualslib.com manuals search engine Easy Entry Seat
The right front seat of your vehicle makes it easy to get in and out of the
rear vehicle area.
a When you tilt the right front seatback fully forward, the whole seat will
slide forward.
After someone gets into the rear seat area, move the right front
seatback to its original position. Then move the seat rearward until
it
locks.
a To get out, again tilt the seatback fully forward.

Downloaded from www.Manualslib.com manuals search engine Rear Folding Seat (Two-Door Models)
Your utility vehicle has a rear folding seat which lets you fold the seatback
down for more cargo space.
Push back on the
seatback as you pull
forward
on the latch at
the righthand side
of
the seat cushion. Then
fold
the seatback
forward.
To raise it, lift up the seatback and push it until it locks in the upright
position.
Your rear seatback has
a mechanical latch on the righthand side, and an
inertia latch
on the lefthand side. Push and pull on the seatback to be sure that
the right side has locked in the upright position. Have it fixed if it doesn’t.
Rear Folding Seat (Four-Door Models)
Your utility vehicle has a folding rear seat which lets you fold the seatback
down for more cargo space.
I The rear seat release
handle is in the upper
center of the rear of
the seatback. Push
back
on the seatback
as
you pull up on the
handle.
TO raise it, just lift up the seatback and push it until it locks in the upright
position.
1-7

Downloaded from www.Manualslib.com manuals search engine Your rear seatback has mechanical latches on both side. Push and pull on the
seatback to check that both latches have locked
in the upright position. If
they haven’t, have them fixed immediately.
1-8

Downloaded from www.Manualslib.com manuals search engine Why Safety Belts Work
When you ride in or on anything, you go as fast as it goes.
For example, if the
bike is going 10 mph
(16 km/h), so is the
child.
When the bike hits the
block,
it stops. But the
child keeps going!
Take the simplest vehicle. Suppose it’s
just
a seat on wheels.
1-10

Downloaded from www.Manualslib.com manuals search engine 3
3. Pick up the latch
plate and pull
the
belt across you.
Don’t let it get
twisted.
4. Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
If the belt isn’t long enough, see “Safety Belt Extender” at the end of
this section.
Make sure the release button on the buckle
is positioned so you would
be able
to unbuckle the safety belt quickly if you ever had to.
The lap part
of the belt should be worn low and snug on the hips, just
touching the thighs. In a crash, this applies force to the strong pelvic bones.
And you’d be less likely to slide under the lap belt.
If you slid under it, the
belt would apply force at your abdomen. This could cause serious
or even
fatal injuries. The shoulder belt should
go over the shoulder and across the
chest. These parts
of the body are best able to take belt restraining forces.
The safety belt locks
if there’s a sudden stop or a crash.
1-16

Downloaded from www.Manualslib.com manuals search engine Right Front Passenger Position
The right front passenger’s safety belt works the same way as the driver’s
safety belt. See “Driver Position,” earlier in this section.
When the lap portion
of the belt is pulled out all the way, it will lock. If it
does, let it go back all the way and start again.
Center Passenger Position
(Four-Door Models)
1-22