wiper blades CHEVROLET CAMARO 1982 Repair Guide

GM – CAMARO 1982-1992 – Repair Guide (Checked by WxMax) 191

Fig. 1: Rear wiper motor assembly
WIPER LINKAGE
REMOVAL & INSTALLATION 1. Remove the wiper arms and blades. Remove the cowl screen or grille.
2. Disconnect the wiring from the wiper motor. Loosen, but do not remove
the nuts which attach the transmission drive link to the motor crank arm.
Then, disconnect the drive link from the arm.
3. Remove the transmission-to-body a ttaching screws from both the right
and left sides of the car.
4. Guide the transmissions and link age out through the cowl opening.
To install: 5. Guide the transmissions and linkage in through the cowl opening.
6. Install the transmission attaching scr ews to both the right and left sides of
the car.
7. Connect the drive link to the arm. Tighten the nuts which attach the
transmission drive link to the motor cr ank arm. Connect the wiring to the
wiper motor.
8. Install the cowl screen or grille.
9. Install the wiper arms and blades.