service schedule CHEVROLET CAMARO 1994 4.G Owners Manual
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 1994, Model line: CAMARO, Model: CHEVROLET CAMARO 1994 4.GPages: 292, PDF Size: 15.35 MB
Page 3 of 292
Downloaded from www.Manualslib.com manuals search engine Camaro
introduction Part
1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part 8
Part 9
1994 Owner’s Manual
Table of Contents
HOW to Use This Manual 6
Seats 81 Restraint Systems 11
Features & Controls 45
Comfort Controls & Audio Systems = 107
Your Driving and the
Road 123
Problems on the Road
147
Service
& Appearance Care 179
Maintenance Schedule
m = = 237
Customer Assistance Information 257
Including “Reporting Safety Defects” on page 259.
Index mm...=..=.....mmm.=.m===m=m======== 267
Service Station Information Last Page
Printed in U.S.A. Part No. 10260940 A Second Edition
1 ...
Page 8 of 292
Downloaded from www.Manualslib.com manuals search engine How to Use This Manual
How to Use This
Manual
Many people read their owner’s manual
from beginning to end when they first
receive their new vehicle. This will help
you learn about the features and controls
for your vehicle. In this manual, you’ll
find that pictures and words work
together to explain things quickly.
Index: A good place to look for what
you need is the Index
in back of the
manual. It’s an alphabetical list of all
that’s in the manual, and the page
number where you’ll find
it.
Parts 1-8: Each part of this manual
begins with a brief list of its contents,
so
you can often find at a glance if a part
contains the information you want.
... 6
How to Use This Manual: This part
tells you how to use your manual and
includes safety and vehicle damage
warnings and symbols.
Part 1 - Seats & Restraint Systems:
This part tells you how to use your seats
and safety belts properly.
It also
explains the air bag system.
Part 2 - Features & Controls: This
part explains how to start and operate
your Chevrolet.
Part 3 - Comfort Controls & Audio
Systems:
This part tells you how to
adjust the comfort controls and how to
operate your sound system.
Part 4 - Your Driving and the Road:
Here you’ll find helpful information
and tips about the road and how to drive
under different conditions.
Part 5 - Problems on the Road: This
part tells
you what to do if you have a
problem while driving, such as a flat
tire or engine overheating, etc.
Part 6 - Service & Appearance
Care:
Here the manual tells you how
to keep your Chevrolet running
properly and looking good.
Part 7 - Maintenance Schedule:
This part tells when to perform vehicle
maintenance and what fluids and
lubricants to use.
Part 8 - Customer Assistance
Information:
This part includes
important information about reporting safety defects and gives you details
about the “Roadside Assistance”
program.
You will also find customer
satisfaction phone numbers (including
customer satisfaction numbers for the
hearing and speech impaired), as well
as the mediatiodarbitration procedure.
We’ve also included ordering
information for service publications
in
this part.
Service Station Information: This is
a quick reference of service
information.
You can find it on the last
page of this manual.
Page 148 of 292
Downloaded from www.Manualslib.com manuals search engine Your Driving and the Road
Driving on Grades
Reduce speed and shift to a lower gear
before you start down a long or steep
downgrade. If you don’t shift down, you
might have to use your brakes
so much
that they would get hot and no longer
work well.
On a long uphill grade, shift down and
reduce your speed to around
45 mph
(70 kmh) to reduce the possibility of
engine and transmission overheating.
If you are towing a trailer and you
have an automatic transmission with
Overdrive, you may prefer to drive
in “D’
instead of Overdrive (or, as you need to,
a lower gear). Or,
if you have a manual
transmission with fifth (or sixth) gear
and you are towing a trailer, it’s better
not to use fifth (or sixth) gear. Just drive
in fourth gear (fifth gear if you have a
six-speed manual transmission) (or, as you
need to, a lower gear).
Parking on Hills
You really should not park your vehicle,
with a trailer attached, on a
hill. If
something goes wrong, your rig could
start to move. People can be injured, and both your vehicle and the trailer can be
damaged.
But if you
ever have to park your
rig on a
hill, here’s how to do it:
1. Apply your regular brakes, but don’t
shift into
“P’ (Park) yet, or into gear
for a manual transmission.
2. Have someone place chocks under the
3. When the wheel chocks are in place,
release the regular brakes until the
chocks absorb the load.
trailer wheels.
4. Reapply the
regular brakes. Then
apply your parking brake, and then
shift to
“P” (Park), or “R” (Reverse)
for a manual transmission.
5. Release the regular brakes.
When You Are Ready to Leave after
Parking on a Hill
1. Apply your regular brakes and hold
the pedal down while you:
Start your engine;
0 Shift into a gear; and
Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear
4. Stop ahd have someone pick up and
of the
chocks.
store the chocks.
Maintenance When Trailer Towing
Your vehicle will need service more often
when you’re pulling a trailer. See the
Maintenance Schedule for more on this.
Things that are especially important in
trailer operation are automatic
transmission fluid (don’t overfill), engine
oil, axle lubricant, belts, cooling system,
and brake adjustment. Each of these is
covered in this manual, and
the Index will
help you find them quickly. If you’re
trailering, it’s a good idea to review these
sections before you start your
trip.
Check periodically to see that all hitch
nuts and bolts are tight.
. . ,146
Page 193 of 292
Downloaded from www.Manualslib.com manuals search engine When to Change Engine Oil:
See if any one of these is true for you:
0 Most trips are less than 4 miles
(6 km).
It’s below freezing outside and most
trips are less than
10 miles (1 6 km).
The engine is at low speed most of the
time (as in door-to-door delivery, or
in
stop-and-go traffic).
0 You tow a trailer often.
@ Most trips are through dusty places.
If any one
of these is true for your
vehiclej
then you need to change your oil
and filter every 3,000 miles (5 000 km) or
3 months - whichever comes first.
If none of them is true, change the oil
every
7,500 miles (12 500 km) or 12
months - whichever comes first. Change
the filter at the first oil change and at
every other oil change after that.
Engine Coolant Heater (Engine Block
Heater):
An engine coolant heater can be a big
help
if you have to park outside in very
cold weather,
0” F (- 18 “C) or colder. If
your vehicle has this option, see “Engine
Coolant Heater”
in the Index.
What to Do with Used Oil:
Did you know that used engine oil
contains elements that may be unhealthy
for your skin and could even cause
cancer? Don’t let used oil stay on your
skin for very long. Clean your skin and
nails with soap and water, or a good hand
cleaner. Wash or properly throw away
clothing or rags containing used engine
oil. (See the manufacturer’s warnings
about the use and disposal
of oil
products.)
Used oil can be a real threat to the
environment. If
you change your own oil,
be sure to drain all free-flowing oil from
the filter before disposal. Don’t ever
dispose of oil by putting it in the trash,
pouring
it on the ground, into sewers, or
into streams
or bodies of water. Instead,
recycle it by taking it to a place that
collects used oil. If you have a problem
properly disposing of your used oil, ask
your dealer, a service station or a local
recycling center for help.
3.4L L32 (Code S
air Cleaner
tefer to the Maintenance Schedule to
letermine when
to replace the air filter.
;ee “Scheduled Maintenance Services” ir
he Index.
191 ...
Page 196 of 292
Downloaded from www.Manualslib.com manuals search engine Service and Appearance Care
Automatic Transmission FIuid
When to Check and Change:
A good time to check your automatic
transmission fluid level is when the
engine oil is changed. Refer to the
Maintenance Schedule to determine when
to change your fluid. See “Scheduled
Maintenance Services” in the Index.
How to Check:
Because this operation can be a little
difficult, you may choose to have this
done at a Chevrolet dealership Service
Department.
If
you do it yourself, be sure to follow all
the instructions here, or
you could get a
false reading on the dipstick.
NOTICE:
Too much or too little fluid can dam-
age your transmission.
Too much can
mean that some of the fluid could
come out and fall on hot engine parts
or exhaust system, starting a fire. Be
sure to get an accurate reading if you
check your transmission fluid.
. . ,194
Wait at least 30 minutes before checking
the transmission fluid level
if you have
been driving:
When outside temperatures are above
90°F (32°C).
0 At high speed for quite a while.
0 In heavy traffic - especially in hot
weather.
While pulling a trailer.
To get the right reading, the fluid should
be at normal operating temperature,
which is 180°F to
200°F (82°C to 93°C).
To check transmission fluid hot: Get
the vehicle warmed up
by driving
about
15 miles (24 km) when outside
temperatures are above 50°F (10°C). If
it’s colder than
50°F (lO”C), drive the
vehicle
in “D” (Third Gear) until the
engine temperature gage moves and then
remains steady for ten minutes. Then
follow the hot check procedures.
To check transmission fluid cold: A cold
check is made after the vehicle has been
sitting for eight hours or more with the
engine off and is used only as a reference.
Let the engine run at idle for five minutes
if outside temperatures are 50°F
( 10°C)
or more. If it’s colder than 50°F (lO”C),
you may have to idle the engine longer. Should the fluid level
be
low during a
cold check, you must perform a hot check
before adding fluid This will give you a
more accurate reading
of the fluid level.
To check the fluid hot or cold:
Park your vehicle on a level place.
With the parking brake applied, place
With your foot on the brake pedal,
the shift lever
in
“P’ (Park).
move the shift lever through each gear
range, pausing for about three seconds in each range. Then, position the shift
lever in
“F’” (Park).
minutes or more.
Let the engine run at idle for three
Page 198 of 292
Downloaded from www.Manualslib.com manuals search engine Service and Appearance Care
If the fluid level is low, add only enough
of the proper fluid to bring the level up to
the “COLD’ area for a cold check or the
“HOT” area for a hot check. It doesn’t
take much fluid, generally less than a pint.
Don’t overfill. We recommend you
use
only fluid labeled DEXRON@-III or
DEXRON@-IIE, because
fluids with that
label are made especially for your
automatic transmission. Dama e caused
by fluid other than DEXRON
-111 or
DEXRON@-IIE is not covered by your
new vehicle warranty.
After adding fluid, recheck the fluid
level as described under
“How to
Check.”
obtained, push the dipstick back in all
the way.
D
When the correct fluid level is
Manual Transmission Fluid
How to Check:
Because this operation can be difficult,
you may choose to have this done at a
Chevrolet dealership Service Department.
If you do it yourself, be sure to follow all
the instructions here, or
you could get a
false reading.
Too much or too little fluid can
damage your transmission.
Too much
can mean that some of the fluid could
come out and fall on hot engine parts
or exhaust system, starting a fire. Be
sure to get an accurate reading if you
check your transmission fluid.
Check the fluid level only when your
engine is off, the vehicle is parked on a
level place and the transmission is cool
enough for you to rest your fingers on
the
transmission case.
Then, follow these steps:
1. Remove the filler plug.
2. Check that the lubricant level is up to
the bottom of
the filler plug hole.
3. If the fluid level is good, install the
plug and be sure it
is fully seated. If
the fluid level is low, add more fluid
as described in the next steps.
How to Add Fluid:
Here’s how to add fluid. Refer to the
Maintenance Schedule to determine what
kind
of fluid to use. See “Recommended
Fluids and Lubricants” in the Index.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add
only enough fluid to bring the fluid
level up to the bottom of
the filler
plug hole.
3. Install the filler plug. Be sure the plug
is fully seated.
,. 196
Page 199 of 292
Downloaded from www.Manualslib.com manuals search engine Hydraulic Clutch
The hydraulic clutch in your vehicle is
self-adjusting. The clutch master cylinder
reservoir is filled with hydraulic clutch
fluid.
It isn’t a good idea to “top off’ your
clutch fluid. Adding fluid won’t correct a
leak.
A fluid loss in this system could indicate
a problem. Have the system inspected and
repaired.
When to Check and What to Use:
Refer to the Maintenance Schedule to
determine how often you should check
the fluid level
in your clutch master
cylinder reservoir and for the proper fluid.
See “Owner Checks and Services” and
“Recommended Fluids and Lubricants”
in the Index.
How to Check:
The proper fluid should be added if the
level is below the
“STEP” mark on the
reservoir. See the instructions on the
reservoir cap.
Rear Axle
When to Check and Change Lubricant:
Refer to the Maintenance Schedule to
determine how often to check the
lubricant and when
to change it. See
“Periodic Maintenance Inspections’’
in
the Index.
How to Check Lubricant:
If the level is below the bottom of the
filler plug hole, you’ll need to add some
lubricant. Add enough lubricant to raise
the level to the bottom of the filler plug
hole.
What to Use
Standard Differential
Use Axle Lubricant (GM Part No.
105227 1 ) or SAE 80W-90 GL-5 gear
lubricant.
Limited-Slip Differential
To add lubricant when the level is low,
use Axle Lubricant (GM Part
No.
105227 1 ) or SAE 80W-90 GL-5 gear
lubricant. To completely refill after
draining, add
4 ounces (1 18 ml) of
Limited-Slip Differential Additive
(GM Part No. 1052358). Then fill to the
bottom of the filler plug hole with Axle
Lubricant (GM Part
No. 12345977) or
SAE 80W-90 GL-5 gear lubricant.
197 ...
Page 204 of 292
Downloaded from www.Manualslib.com manuals search engine Service and Appearance Care
NOTICE:
0
0
0
0
When using concentrated washer
fluid, follow the manufacturer’s
instructions for adding water.
Don’t mix water with
ready-to-use washer fluid. Water
can cause the solution
to freeze
and damage your washer fluid
tank and other parts of the washer
system. Also, water doesn’t clean
as well as washer fluid.
Fill your washer fluid tank only
314 full when it’s very cold. This
allows for expansion, which could
damage the tank
if it is completely
full.
Don’t use radiator antifreeze in
your windshield washer.
It can
damage your washer system and
paint.
r
#
-
I
E
fi
T
fl
g
g
n
li
b
1€
Yi
si
Y
u
3rake Masfer Cylinder
‘our brake master cylinder is here. It is
dled with DOT-3 brake fluid.
‘here are only two reasons why the brake
luid level
in your master cylinder might
o down. The first is that the brake fluid
oes down to an acceptable level during
ormal brake lining wear. When new
nings
are put in, the fluid level goes
ack
up. The other reason is that fluid is
:aking
out of the brake system. If it is,
ou should have your brake system fixed,
mce a leak means that sooner or later
our brakes won’t work well, or won’t
lork at all.
So, it isn’t a good idea to “top off’ your
brake fluid. Adding brake fluid won’t
correct a leak. If you add fluid when your
linings are worn, then you’ll have too
much fluid when you get new brake
linings.
You should add (or remove)
brake fluid, as necessary, only when work
is done on the brake hydraulic system.
Refer to the Maintenance Schedule to
determine when to check your brake
fluid. See “Periodic Maintenance
Inspections” in the Index.
. . .1u1
Page 218 of 292
Downloaded from www.Manualslib.com manuals search engine Service and Appearance Care
When to Check: Check your tires once a
month or more. Don’t forget your
compact spare tire. It should be at
60 psi
(420 kPa).
How to Check: Use a good quality
pocket-type gage to check tire pressure.
Simply looking at the tires will not tell
you the pressure, especially if you have
radial tires
- which may look properly
inflated even
if they’re underinflated.
If your tires have valve caps, be sure to
put them back on. They help prevent
leaks by keeping out dirt and moisture. Tire Inspection and Rotation
To make your tires last longer, have them
inspected and rotated at the mileages
recommended
in the Maintenance
Schedule. See “Scheduled Maintenance
Services” in the Index.
[f you don’t have P245/50ZR16 size tires
use the rotation pattern shown above for
your size tires.
4-
f you have P245/50ZR16 size tires, they
nust roll in
a certain direction for the best
werall performance. The direction is
hown by an arrow on both sidewalls.
3ecause these tires are directional, they
hould be rotated as shown
in the
:xample above. These tires should only
,e moved from front to rear and rear to
ront on the same side of the vehicle.
ifter the tires have been rotated, adjust
he front and rear inflation pressure as
.hown on
the Tire-Loading Information
abel. Make certain that all wheel nuts are
u-operly tightened. See “Wheel Nut
rorque” in the Index.
. . .216
Page 239 of 292
Downloaded from www.Manualslib.com manuals search engine IMPORTANT: I
KEEP THE ENGINE OIL
AT THE PROPER
LEVEL AND CHANGE AS
RECOMMENDED
I
This part covers the
maintenance required for your
Chevrolet
. Your vehicle needs
these services
to retain its
safety. dependability and
emission control performance
.
Part l
Maintenance Schedule
Section
Introduction: A Word about Maintenance ........................ 238
A .
B .
C .
D .
E .
Your Vehicle and the Environment ......................... 238
How This Part Is Organized
............................... 238
Scheduled Maintenance Services ............................ 240
Using Your Maintenance Schedules ......................... 239
Selecting the Right Schedule
.............................. 239
Schedule1
............................................. 240
Schedule11
............................................ 242
Explanation
of Scheduled Maintenance Services .............. 244
Owner Checks and Services ................................ 246
AtEachFuelFill
....................................... 246
At Least Once a Month .................................. 246
AtLeastTwiceaYear
................................... 246
AtLeastOnceaYear
.................................... 247
Periodic Maintenance Inspections ........................... 249
Recommended Fluids and Lubricants ........................ 251
Maintenance Record ...................................... 253
lqq I
Have you purchased the GM Protection Plan? The Plan
supplements
your. new car warranties .
See your GM dealer for details .
237 ...