water pump CHEVROLET CAMARO 1995 4.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine If the coolant inside the coolant recovery tank is boiling,
don’t
do anything else until it cools down.
When
it is cool, remove the coolant recovery tank cap
and look at the dipstick. The coolant
level should be
FULL COLD. If it isn’t, you
may have
a leak in the radiator hoses, heater hoses,
radiator, water pump
or somewhere else in the cooling
system.
I NOTICE:
Engine damage from running your engine
without coolant
isn’t covered by your warranty.
If there seems to be no leak, with the engine on check to
see if the electric engine fan is running. If the engine is
overheating, the fan should be running. If it isn’t, your
vehicle needs service.

Downloaded from www.Manualslib.com manuals search engine 3. After the engine cools, open the air bleed valves on
the heater return hose and water pump inlet. 4.
5.
6.
7.
Fill with the proper mix. Add coolant until you see a
steady stream of coolant coming from the bleed
valves.
Close the bleed valves.
Continue to fill the radiator up to the base of the
filler neck.
Rinse or wipe the spilled coolant from the engine and compartment.
5-24