driver seat adjustment CHEVROLET EQUINOX 2020 Get To Know Guide

2
INSTRUMENT PANEL
Low Fuel
Traction Control Off
Brake System
Cruise Control
StabiliTrak Active
StabiliTrak Off
Forward Collision Alert
Security
Electric Parking Brake
Electric Parking Brake Service
Lights On Reminder
Airbag Readiness
Engine Oil Pressure
Check Engine
Lane Keep Assist
SYMBOLS
Turn Signal Lever/IntelliBeam Control
Driver Information Center
Voice Recognition Buttons/Driver Information Center ControlsWindshield Wipers Lever
Power Mirror/Window Switches
Heated Steering WheelF/Cruise Control/Forward Collision Alert/Lane Keep Assist Buttons
Steering Wheel Adjustment Lever
Audio Volume Control (behind steering wheel)
Instrument Panel/Exterior Lamp Controls
Audio Next/Previous Favorite Station Controls (behind steering wheel)
Memory Seat ButtonsFPower Liftgate ControlF
Engine Start/Stop Button

6F Optional equipment
POWER SEAT ADJUSTMENTS
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or raise the seatback.
C. Lumbar Support Adjustment
Press and hold the round control to adjust the amount of lumbar support.
MEMORY SEATS
1. Adjust the seat and power outside mirrors.
2. Press and release the SET button; a beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
To store a seat position for when exiting the vehicle, repeat these step\
s using the Exit button instead of button 1 or 2.
RECALL MEMORY POSITIONS Press and hold button 1, 2, or Exit.
For automatic recall, go to Settings > Vehicle > Seating Position > Seat\
Entry Memory and Seat Exit Memory.See Seats and Restraints in your Owner’s Manual.
RECLINING THE REAR SEAT Pull the lever (A) on top of the seatback and move the seatback to the desired position. Release the lever.
FOLDING THE REAR SEAT
1. Press the button on the head restraint. It will fold automatically.
2. Pull the lever (A) on top of the seatback — a tab near the lever is visible when the seat-back is unlatched — and fold the seatback forward. From the cargo area, pull the top leverF (B) ( passenger’s side seat) or bottom leverF (C) ( driver’s side seat) located on the passen-ger’s side of the cargo area to fold either seatback.
3. Stow the seat belt in the belt clip.
POWER SEATSF
REAR SEATS
A
A
BC
CB
See Seats and Restraints in your Owner’s Manual.