roof CHEVROLET EXPRESS CARGO VAN 2017 1.G User Guide

Chevrolet Express Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-9967827) - 2017 - crc - 5/2/16
244 Vehicle Care
6. Remove the taillamp/turn signallamp (1) or back-up lamp (2)bulb socket by turning itcounterclockwise one-quarterturn and pulling it out of thelamp assembly.
7. Remove the bulb by pulling itstraight out.
8. Push the new bulb into thesocket.
9. Reinstall the bulb socket byturning it clockwise into thelamp assembly.
10. Reverse Steps 1–5toreinstallthe taillamp assembly andapplique.
Center High-Mounted
Stoplamp (CHMSL)
The Center High-Mounted Stoplamp(CHMSL) is above the rear doors atthe center of the vehicle.
To r e p l a c e a b u l b :
1. Remove the two screws fromthe CHMSL assembly.
2. Remove the CHMSL assembly.
3. Turn the bulb socketcounterclockwise one-quarterturn to remove it from the lampassembly.
4. Pull the old bulb straight out ofthe socket and push the newbulb into the socket.
5. Turn the bulb socket clockwiseone-quarter turn to install it inthe lamp assembly.
6. Reinstall the CHMSL assemblyand two screws.
Do not block or damage the CHMSLwhen items are loaded on the roofof the vehicle.
License Plate Lamp
1. Bulb Socket