CHEVROLET MALIBU 2006 6.G Owners Manual
Manufacturer: CHEVROLET, Model Year: 2006, Model line: MALIBU, Model: CHEVROLET MALIBU 2006 6.GPages: 442, PDF Size: 2.61 MB
Page 371 of 442

1. Open the trunk. SeeTrunk (Sedan) on page 2-15
for more information.
2. Remove the center cap from the wheel.
3. Place the tire (D) in the compartment, valve stem
up, with the bolt (E) extending through the wheel
center hole.
4. Place the jack and wheel wrench (D) over the
bolt (E), inside the wheel.
5. Secure by tightening the larger wing nut (B) onto
the bolt (E).
6. Reinstall the tire cover (A).Storing the Compact Spare Tire
The compact spare tire is for temporary use only.
Store the compact spare tire and tools as shown in the
following diagram.
A. Cover
B. Retainer
C. Spare TireD. Wing Nut
E. Jack and Wheel Wrench
F. Bolt
The compact spare is for temporary use only. Replace
the compact spare tire with a full-size tire as soon
as you can. SeeCompact Spare Tire on page 5-88.
5-83
Page 372 of 442

Storing a Flat or Spare Tire and
Tools (Sedan SS)
{CAUTION:
Storing a jack, a tire, or other equipment in the
passenger compartment of the vehicle could
cause injury. In a sudden stop or collision,
loose equipment could strike someone.
Store all these in the proper place.
Storing the Flat Tire and Tools
To store the at tire and jack in the compact spare tire
compartment, do the following:
1. Open the trunk. SeeTrunk (Sedan) on page 2-15
for more information.
2. Remove the bolt extension (in the yellow sleeve)
from the jack and remove the center cap from
the wheel.3. Place the jack over the bolt (B) on the oor, making
sure it contacts the bolt as shown.
4. With the yellow cap in place to prevent the wheel
from being scratched, place the bolt extension (A)
onto the bolt (B).
5. Thread the small wing nut (C) until it is at or near
the end of the threads.
6. Place the at tire in the compartment, valve stem up.
7. Reach under the wheel and lift the bolt
extension (A) so that the threaded end of the
bolt passes through the center hole of the wheel.
5-84
Page 373 of 442

8. Remove the yellow cap.
9. Secure the tire and wheel with the retainer.
10. Re-install the cover.
A. Cover
B. Retainer
C. Flat Tire
D. Wing NutE. Bolt Extension
F. Jack and
Wheel Wrench
G. BoltStoring the Compact Spare Tire
The compact spare tire is for temporary use only.
Store the compact spare tire and tools as shown in the
following diagram.
A. Cover
B. Retainer
C. Flat Tire
D. Wing NutE. Jack, Wheel Wrench
and Bolt Extension
F. Bolt
The compact spare is for temporary use only. Replace
the compact spare tire with a full-size tire as soon
as you can. SeeCompact Spare Tire on page 5-88.
5-85
Page 374 of 442

Storing a Flat or Spare Tire and
Tools (All MAXX Models)
{CAUTION:
Storing a jack, a tire, or other equipment in the
passenger compartment of the vehicle could
cause injury. In a sudden stop or collision,
loose equipment could strike someone.
Store all these in the proper place.
Storing the Flat Tire and Tools
To store the at tire and jack in the compact spare tire
compartment, do the following:
1. Open the liftgate. SeeLiftgate (MAXX) on page 2-16
for more information.
2. Remove the bolt extension (in the yellow sleeve)
from the jack and remove the center cap from
the wheel.3. Place the jack over the bolt (B) on the oor, making
sure it contacts the bolt as shown.
4. Install the bracket (D) and then the bolt
extension (A).
5. Secure the jack, bracket and bolt extension with the
wing nut (C) provided.
5-86