clock CHEVROLET MONTE CARLO 1995 5.G User Guide

Downloaded from www.Manualslib.com manuals search engine 1
3. Position the radiator air side baffle aside and remove
the two nuts. 4. Slide the headlamp assembly outboard and gently
pull the inside of the assembly away from the
vehicle.
5. Push the tab on the bulb socket and turn it
counterclockwise. Pull the socket out of the
assembly.
Do not twist the bulb.
6. Remove the bulb from the socket by pulling it out.
7. Push in the new bulb.
8. Reverse Steps 1-4 to replace the assembly.
6-3 1

Downloaded from www.Manualslib.com manuals search engine Front and Rear Sidemarker Lamps
2.
3.
4.
5.
6.
7.
Pull the sidemarker lens away from the body.
Turn the socket counterclockwise until it stops. Then
pull the socket and bulb
from the assembly.
Pull the bulb out of the socket.
Do not twist the bulb.
Plug the new bulb in the socket.
Replace the bulb and socket.
Replace the assembly in the vehicle. Replace the
screw.

Downloaded from www.Manualslib.com manuals search engine Center High-Mounted Stoplamp (Shelf-Mounted)
To reach the center high-mounted stoplamp, you must
go through the trunk.
1. Open the trunk lid. Locate the stoplamp behind the
rear seats, in front
of the trunk hinges.
2. Turn the socket counterclockwise until it stops
and pull the bulb and socket out of the center
high-mounted stoplight assembly.
3. Push in the bulb, turn it counterclockwise and pull it
out of the socket.
4. Push the new bulb into the socket and turn it
clockwise.
5. Replace the bulb and socket in the assembly.
Center High-Mounted Stoplamp
(Spoiler-Mounted)
1. Remove the two screws from the stoplamp assembly.
2. Pull the assembly forward out of the spoiler.
3. Remove the three screws from the back of the
stoplamp assembly.
4. Pull the lamp strip out of the stoplamp assembly.
5. Remove the bulb.
6. Install the new bulb and reverse Steps 1-4.
6-33

Downloaded from www.Manualslib.com manuals search engine Tail/Stop/Thm Signal Lamp
1. Open the trunk. Remove the convenience net if you
have one. Unhook the net from the upper wing nut.
2. Remove the upper
(convenience net) wing
nut, if equipped.
3. Pull the carpet away
from the rear of the
vehicle.
4. Unscrew the two remaining wing nuts.
5. Pull the assembly from the body carefully.
6. To remove a socket, press the tab, turn the socket
counterclockwise
and pull it out.
7. Pull the bulb out. Do not twist it.
8. Push the new bulb into the socket.
9. Replace the socket in the assembly.
10. Tighten the socket (both kinds) by turning it clockwise.
11. Install the assembly and the two lower wing nuts.
12. Replace the carpeting.
13. Replace the upper (convenience net) wing nut, if
14. Replace the convenience net, if equipped.
equipped.
6-34

Downloaded from www.Manualslib.com manuals search engine Back-up Lamp
1. Open the trunk. The back-up lamp bulbs are in the
rear
of the trunk lid.
2. Press the tab on the
socket, turn the socket
counterclockwise and
pull it out.
I
3. To remove the bulb, pull it out of the socket. Do not
twist the
bulb.
4. Push the new bulb into the socket.
5. Reverse Steps 1-3 to replace the socket.
Windshield Wiper Blade
Replacement
1. Pull the windshield wiper arm away from the
windshield.
___\_
2. Lift the release clip with a screwdriver and pull the
blade
off the wiper arm.
3. Push the new wiper blade securely onto the wiper
arm.

Downloaded from www.Manualslib.com manuals search engine TopStrap ................................... 1-34
WheretoPut
................................ 1-33
Cigarette Lighter
............................... 2-39
Circuit Breaker. Power Windows and
Other Power Options
........................... 6-59
City Driving
................................... 4-17
Cleaner. Air
................................... 6-15
Cleaning Aluminum Wheels
........................... 6-49
Fabric
..................................... 6-45
Glass
...................................... 6- 47
Inside ..................................... 6-44
Leather
.................................... 6-47
Outside of the Windshield and Wiper Blades
....... 6-48
Outside
.................................... 6-48
Special Problems
............................ 6-46
Stains
...................................... 6-46
Tires
...................................... 6-50
Top of the Instrument Panel
.................... 6-47
Vinyl
...................................... 6- 46
Clock, Setting
the ................................ 3-5
Comfort Controls
................................ 3- 1
Comfort Guides, Rear Safety Belt .................. 1-28
Compact Disc Care
............................. 3- 17
Compact Disc Player
............................ 3- 12
Compact Spare Tire ............................. 5-3 1
Console Shift Lever ............................. 2-20
Console, Center
................................ 2-37
Control of
a Vehicle .............................. 4-5
Control,
Loss Of ................................ 4- 12
Convenience Net ............................... 2-36
Convex Outside Mirror
.......................... 2-35
Coolant
....................................... 6-19
Bleedvalves
................................ 5-19
Heater. Engine
......................... 2-14 13. 6.
How to Add to the Coolant Recovery Tank
........ 5-16
How to Add to the Radiator
.................... 5-18
Temperature Gage
............................ 2-48
Temperature Light
........................... 2-47
Cooling System
................................ 5-14
Courtesy Transportation
........................... 8-6
Cruise Control
................................. 2-28
Erasing Speed Memory
........................ 2-30
Getting Out Of
.............................. 2-30
Passing Another Vehicle While Using
............ 2-30
To Increase Speed ............................ 2-29
ToReduceSpeed
............................ 2-29
To Resume a Set Speed ........................ 2-29
ToSet
..................................... 2-28
UseonHills
................................ 2-30
Cupholders
.................................... 2-36
Customer Assistance for the Hearing or
Speech Impaired
............................... 8-2
Customer Assistance Information
................... 8-1
Customer Satisfaction Procedure
.................... 8-1
Damage. Finish
............................... 6-50
Damage. Sheet Metal
............................ 6-50
Daytime Running Lamps
......................... 2-32
Dead Battery
................................... 5-2
9-3