clock reset CHEVROLET MONTE CARLO 1996 5.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine In addition to the four stations set as above, up to three
additional stations may be preset on each band by
pressing two adjoining buttons at the same time. Just:
1. Tune in the desired station.
2. Press SET.
3. Press any two adjoining pushbuttons at the same
time (within five seconds).
4. The sound will mute. When it returns, release the
buttons. Whenever you press the same buttons, the
station
you set will return.
Setting the Tone
BASS:
Slide the lever up or down to increase or
decrease bass. The middle position is a detent.
TREB: Slide the lever up or down to increase or decrease
treble. The middle position is
a detent. If a station is weak
or noisy, you may want to decrease the treble.
Adjusting the S.peakers
BAL:
Turn the control behind the upper knob to move
the sound
to the left or right speakers. The middle
position is
a detent and balances the speakers.
FADE: Turn the control behind the lower knob to move
the sound to the front or rear speakers. The middle
position
is a detent and balances the speakers.
AM-FM Stereo with Cassette Tape
Player (Option)
Playing the Radio
VOLUME-BAL-RECALL:
This knob turns the
system on and off and controls the volume. Turn the
upper knob clockwise to increase volume. Turn it
counterclockwise to decrease volume. Press the upper
knob briefly to recall the station being played or the
clock display.
If you press the button when the ignition
is off, the clock
will show for a few seconds.
Finding a Station
AM-FM:
Press and release the lower knob to get AM,
FM 1 or FM2. The display shows your selection.
3-7

Downloaded from www.Manualslib.com manuals search engine P.SCAN: Press this button to listen to each of your favorite
stations stored on your pushbuttons for a few seconds. The
radio will scan through each of the stations stored on your
pushbuttons, except those stations
with weak reception.
The AUTO TONE setting stored for that pushbutton will
be automatically chosen. Press P.SCAN or one of
the
pushbuttons again to stop scanning. P.SCAN will be
displayed whenever the tuner is in the P.SCAN mode. The
channel number (P1 -P6) will appear momentarily just
before the frequency is displayed. In FM mode, this
function will scan through both FM1 and FM2 preset
stations and FMl or FM2. will appear on the display.
PUSHBUTTONS: The six numbered pushbuttons let
you return to your favorite stations. You can set up to
18 stations (six AM, six FMI and six FM2).
1.
2.
3.
4.
5.
Press AM-FM to select the band.
Find the station you want by using TUNE or SEEK.
Press AUTO
TONE to select the graph that best suits
the type of station selected.
Press and hold one
of the six numbered buttons.
The sound will mute. When it returns, release
the
button. Whenever you press that numbered button,
the station you set will return and the AUTO
TONE
equalization that you selected will also be
automatically selected for that button. If
you manually
tune or use or SCAN to find
a frequency stored in
a preset, the AUTO TONE
equalization stored for that frequency will be recalled.
Always check the display first
to make sure you have
the correct band.
Setting the Tone
AUTO TONE: This feature allows you to choose
preset treble and bass equalization settings designed for
classical, news, rock, pop and jazz stations. CLASSIC
will appear on the display when you first press AUTO
TONE. Each time
you press it, another setting will
appear on
the display. Press it again after JAZZ appears
and MAN will appear. Tone control will return to the
TREB and BASS knobs. Also,
if you use the treble
and bass knobs, control will return to them and MAN
will appear.
BASS: Press this knob lightly so it extends. Turn the
knob clockwise to increase bass.
Turn it counterclockwise
to decrease bass. The middle position
is a detent. When
you use this control, the radio’s AUTO TONE setting will
switch to manual.
3-11