engine coolant CHEVROLET S10 1997 2.G User Guide

Downloaded from www.Manualslib.com manuals search engine Wow .to Add Coolant to the Radiator
2. Then keep turning the pressur'e cap, but. now push
down
as you turn it. Remove the pressure cap.
1. You can remove the pressure cap when the cooling
system, inchding the pressure cap and upper radiator
hose, is no longer hot. Turn the-pressure cap slowly
counterclockwise until'it first stops. (Don't press
down while turning the pressure cap.)
If you hear a hiss, wait for that to stop. A hiss means
there is still some
pressure left.

Downloaded from www.Manualslib.com manuals search engine 3. Fill the radiator with the proper DEX-cOOL@
co.olant mixture, up to the base of the filler neck.
4. Then fill the coolant recovery tank to the ADD mark.
5. Put the cap back on the coolant recovery tank, but
leave the pressure cap off.
5-20

Downloaded from www.Manualslib.com manuals search engine 6. Start the engine and let itrun until you can feel the
upper radi:ator hose. getting
hot. Watch out for the
engine fan.
7. By this time, the coolant level inside the filler neck
may be lower. If .the level is lower, tidd more of the
proper
DEX-COOL@ coolant mixture through
the filler neck until the level reach.es xh-e base
af the
filler neck.
8. Then replace the pressure cap, A,t any time during
this procedure
if coolant begins to flow aut of the
filler ne.ck, reinstall
the press-ure cap. B.e-sure the
arro.ws on t.he pressure cap line up like this.

Downloaded from www.Manualslib.com manuals search engine Section 6 Service and. Appearance Care
Here:you will find inf6frriatisn about 'the care of your vehicle. This section begins with Service and fuel information,,
and then it.shows how to check important fluid and lubriean~.Ievz=ls.. There is a1s.o technical informatkm &;gut your
vehicle, and a pmt devoteft to itsappearance c.are.
Fuel
Fuels in Foreign Countrks
Filling
Your Tank
Checking Things Ugdgr lhs Hood
Engine Oil
Air Cleaner
Autam-atic Trans-missi-on Fluid.
Manual Transmission Fluid..
Hy.draulk Clutch
Rear Axle
Four-wheel Drive
Engine' Coolant
Radiator Pressare- Cap
'Thermg-sgat
P6we.r. Steering Fluid
..
6-29
6-3.1
6- 3-5.
6 -3 5
-6-42
6-44
-6-53
6-53
6-57
6-6.1
6-62
'6-63
6-67
6-68
&'70
Windshield. Washer Fluid
Brakes
Battery
Bulb Replacement
Windshield;
Wiper Blade Rephement
Tires
Appearance Care
Cleaning the Inside of Your Vehicle
Cleaning the Outside
of Your Vehicle
Appearance Care Materids Chat
Vehicle Identification Number (VIN)
Electrical Sptem
Replacement Bulbs
Capacities -and Specificztions
Air Conditioning Refrigerants
6" 1

Downloaded from www.Manualslib.com manuals search engine Then go to the front of the vehicle and release the
secondary hood- release.
Lift the hood, release the hood prop from its retainer .and
put.the hood prop into the slot in the hood. You may
have a lamp that comes on when you lift the hood.
Things that burn can-get on hot engine parts and
start a fire. These include liquids like gasoline,
oil, coolant, brake fluid,. windshield washer and
other fluids,-.and plastic or rubber.
Yau or others
could
be burned. Be carefuL not to drop or spill
things that will burn onto a hot engine.
6-7
-

Downloaded from www.Manualslib.com manuals search engine When you.lift the hood, you’ll see these items on the 2.2L engine:
A. Coolant Recovery Tank
B. Engine 011 Fill Cap and Dipstick
C. Brake Master Cylinder
D. Hydraulic Clutch Reservoi.r
E. Battery
E Power Steering Reservoir
G. Air Cleaner
H. WindshieId Washer Fluid
6-8

Downloaded from www.Manualslib.com manuals search engine When you lift the hood, you’ll see these items on the “VORTEC” 4300 engine:
A. Battery
E.
Coolant Recovery Tank
C. Engine Oil Dipstick
D. Transmission Dipstick
E. Engine Oil Fill
F. Power Steering Reservoir
G. Brake Master Cylinder
H. Air Cleaner
I. Windshield Washer Fluid

Downloaded from www.Manualslib.com manuals search engine Front Axle
When to Check and Change Lubricant
Referto the Maitltenance Schedule -to determine haw
often to check the lubricant and when to change it. See
“Scheduled Maintenance S-ervic-es” in the Index.
HOW to Check Lubricant
If the 1ev.el is below -the bottom of the filler plug hole,
youfll need to add some lubricant.
If the differential is at aperating temperature (warm),
add enough lubricant to ,raise the level to the bottom of
the filler plug hole,
If the differe.ntia1 is. cold, add enough lubricant to raise-
the level
to 1/2 inch ( 12 mm) below the filler plug hole.
What to Use
Refer to the Maintenance Schedule to determirie what
kind
of lubricant to use. See “Recommended Fluids and
Lubricants” in the Index.
Engine C,oolant
The cooling system in your vehicle is filled
with
DEX-COOL@ engine coolant. This coolant is
designed to remain in your vehicle for:5 year$ or
150,000 miles (240 000 km), whicheveroccurs first,
if you add only DEX-COOL@ extended life coolant.
The fdIowing explains
your .coaling system and how to
add coolant when
it is-10~~ If YQU have a problem with
engine overheating,
see “Engine Overheating’’ in
the Index.
6-24

Downloaded from www.Manualslib.com manuals search engine A :50/50 mixture of water and DEX-COOL@ coolant far
your vehicle will:
Give freezing protection down to -34°F (-37°C).
Give boiling protection up to-265'0F (129 "C).
0 Protect against rust and corrosion.
0 Help keep the proper engine temperature.
0 Let the whg lights and gages work as they should.
NOTICE:
When adding. coolant, It is important that you use
only DEX--COOL@ (s&ate-&ee) coolant.
Tf co.olant other than DEX-COOL@ is added to
the system, premature. engine, heater core
or
radiator corrosion may result. In addition, the
engine coolant will require change sdoner
-- at
30,000 miles (SO 000 km) .or 24 months,
whichever occurs first. Damage caused by the use
of coolant other than DEX=COOL@ is not
covered by your new vehicle warranty.
W.hat to Use
Use a mixture of one-half clean water (preferably
distilled) and one-half
DEX-COOL' coolant which
won't
damage aluminum parts. If YOU use this mixture,
you don't need
to add anything else.
Adding only plain water to your co ng system
can be dangerous.
Plain water, or some other
Iiquid.like alcohol, can boil before the proper
coolant mix will. Your vehicle's coolant warning
system is set
for the proper coolant mix. With
plain water or the wrong mix, your engme could
get too hot but you wouldn't get the overheat
warning. Your engme
c:onld catch -6re and you or
others could be burned. Use a 50/50 mix of clean
water and
DEX=COOLQ coolant.
6-25

Downloaded from www.Manualslib.com manuals search engine NOTICE:
If you .use an improper coolant mix, your engine
conld overheat and be badly damaged.
The
repair cost wouldn’t be covered by pur
warranty.
Too much water in the mix can freeze
and crack the
engine, radiator, heater core and
other
parts.
If you have. to add. coolant more than four times a year,
have your dealer check. your cooling system.
NOTICE:
If yon use. the proper coolant, you don’t have to
add
extra inhibitors or additives which claim to
improve the system. These can
be harmful.
Checking Coolant
When your engine i.s cold, the coolant level should be at
ADD, or a little higher. When your engine is warln, the
level should be up to FULL H.OT, or a little higher.
6-26