hood release CHEVROLET S10 1997 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine Then go to the front of the vehicle and release the
secondary hood- release.
Lift the hood, release the hood prop from its retainer .and
put.the hood prop into the slot in the hood. You may
have a lamp that comes on when you lift the hood.
Things that burn can-get on hot engine parts and
start a fire. These include liquids like gasoline,
oil, coolant, brake fluid,. windshield washer and
other fluids,-.and plastic or rubber.
Yau or others
could
be burned. Be carefuL not to drop or spill
things that will burn onto a hot engine.
6-7
-

Downloaded from www.Manualslib.com manuals search engine USAGE
Hood Latch
Assembly,
Pivots, Spring
Anchor and
Release Pawl
Tailgate Handle
Pivot Points,
Hinges, Latch
Bolt and Linkage
€hod and
Door Hinges
FLUIDLUBRICANT
Lubriplate lubricant aerosol
(GM Part No. 12346293 or
equivalent) or lubricant meeting
requirements
of-NLGI ## 2,
Category
LB or GC-LB.
MU~~~-€‘U~POS~ lubricant, SU~~~UIX’
(GM PartNo. l2346241
or equivalent).
Multi-Purpose lubricant, Superlube’
(GM Part No. 12346241
.or equivalent).
USAGE ~~~~
Weatherstrip
Conditioning
~~~~~
Weatherstrip
Squeaks
FLUIDLUBRICANT I
Dielectric Silicone Grease (GM
Part No. 12345579 or equivalent).
Midti-purpose lubricant, Superlube@
(GM Part No. 12346241
or equivdent).
See “Replacement
Parts” -in the Index for recmmnmended
replacement filters, valves
and spark plugs.
7-62