remote start CHEVROLET TAHOE 2012 3.G Owners Manual
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 2012, Model line: TAHOE, Model: CHEVROLET TAHOE 2012 3.GPages: 60, PDF Size: 1.12 MB
Page 6 of 60
Black plate (2,1)Chevrolet Tahoe Police and Special Service Packages - 2012
2-2 Keys, Doors, and Windows
Remote Keyless
Entry Transmitter
Programming‐SEO
AMF - Fleet Package of
6 Unprogrammed Remote
Units
Do not operate or program the
transmitters in the vicinity of other
vehicles that are in the keyless
entry program mode. This prevents
the programming of the transmitters
to the incorrect vehicle.
Up to eight transmitters may be
programmed to the RKE on Police
and Special Service Package
equipped vehicles. The first four
transmitters are given the position of
#1-#4 in the RKE. Any further
transmitters will also be assigned to
position #4.
Verify that the proper transmitters
are learned to the vehicle. Do not
learn a transmitter with a remote
start button to a vehicle that does
not have remote start. To access this DIC display, the
vehicle must be in P (Park). To
match a remote keyless entry
transmitter to the vehicle, do the
following:
1. Press the trip odometer reset
stem until RELEARN REMOTE
KEY displays.
2. Press and hold the trip reset stem for three seconds. The
message REMOTE KEY
LEARNING ACTIVE will display.
3. At the same time, press and hold
QandKon the first
transmitter for approximately
15 seconds. A beep will sound
indicating the transmitter is
matched to the vehicle.
4. Repeat Step 3 to match up to five more transmitters. A total of
eight transmitters can be
matched per vehicle.
5. To exit the programming mode, turn the ignition key to LOCK/
OFF .