ECU CHRYSLER 200 CONVERTIBLE 2013 1.G Workshop Manual

4. Turn the jack screw to the left until the jack can be
placed under the jacking location. Once the jack is
positioned, turn the jack screw to the right until the
jack head is properly engaged with the lift area closest
to the wheel to be changed. Do not raise the vehicle
until you are sure the jack is securely engaged.
Front Jacking LocationRear Jacking Location6
WHAT TO DO IN EMERGENCIES 405

WARNING!
•To avoid the risk of forcing the vehicle off the jack,
do not tighten the lug nuts fully until the vehicle
has been lowered. Failure to follow this warning
may result in personal injury.
•To avoid possible personal injury, handle the
wheel covers with care to avoid contact with any
sharp edges.
7. Lower the vehicle by turning the jack screw to the left.
8. Finish tightening the nuts. Push down on the wrench
while at the end of the handle for increased leverage.
Tighten the lug nuts in a star pattern until each nut has
been tightened twice. The correct wheel nut torque is
100 ft lbs (135 N·m). If you doubt that you have
tightened the nuts correctly, have them checked with a
torque wrench by your authorized dealer or at a
service station.9. Remove the wheel blocks and lower the jack until it is
free. Release the parking brake before driving the
vehicle. Reassemble the lug wrench to the jack assem-
bly and stow it in the spare tire area. Secure the
assembly using the means provided.
WARNING!
A loose tire or jack thrown forward in a collision or
hard stop could endanger the occupants of the ve-
hicle. Always stow the jack parts and the spare tire in
the places provided.
10. Place the deflated (flat) tire in the cargo area andhave
the tire repaired or replaced as soon as possible.
11. Check the tire pressure as soon as possible. Correct
the tire pressure as required.
6
WHAT TO DO IN EMERGENCIES 407

Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use only tow bars and other
equipment designed for this purpose, following equip-
ment manufacturer ’s instructions. Use of safety chains is
mandatory. Attach a tow bar or other towing device to
main structural members of the vehicle, not to bumpers
or associated brackets. State and local laws regarding
vehicles under tow must be observed.
If you must use the accessories (wipers, defrosters, etc.)
while being towed, the ignition must be in the ON/RUN
position, not the ACC position.
If your vehicle’s battery is discharged, seeShift Lever
OverrideinWhat To Do In Emergenciesfor instruc-
tions on shifting the automatic transmission out of PARK
for towing.CAUTION!
•Do not use sling type equipment when towing.
Damage to the fascia will occur.
•When securing the vehicle to a flatbed truck, do not
attach to front or rear suspension components.
Damage to your vehicle may result from improper
towing.
•Do not push or tow this vehicle with another
vehicle as damage to the bumper fascia and trans-
mission may result.
The manufacturer recommends towing your vehicle with
all four wheels OFF the ground using a flatbed.
If flatbed equipment is not available, and the transmis-
sion is operable, the vehicle may be flat towed (with all
four wheels on the ground) under the following condi-
tions:
418 WHAT TO DO IN EMERGENCIES

The A/C Air Filter is located in the fresh air inlet behind
the glove box. Perform the following procedure to re-
place the filter:
1. Open the glove box and remove all contents.
2. Push in on the sides of the glove box and lower the
door.
3. Disconnect the glove box door dampener from the slot
on the side of the box. This is done by grasping the
dampener connector (on the outside of the box) and
the end of the connector pin (on the inside of the box)
with your thumb and forefinger and pulling outward
while lightly lifting upward on the door with your
other hand. Once disconnected, the dampener will
retract underneath the instrument panel if you release
it.
4. Pivot the glove box downward.5. Disengage the two retaining tabs that secure the filter
cover to the HVAC housing and remove the cover.
6. Remove the A/C Air Filter by pulling it straight out of
the housing.
A/C Air Filter Replacement
436 MAINTAINING YOUR VEHICLE

WARNING! (Continued)
•To avoid contamination from foreign matter or
moisture, use only new brake fluid or fluid that has
been in a tightly closed container. Keep the master
cylinder reservoir cap secured at all times. Brake
fluid in a open container absorbs moisture from the
air resulting in a lower boiling point. This may
cause it to boil unexpectedly during hard or pro-
longed braking, resulting in sudden brake failure.
This could result in a collision.
•Overfilling the brake fluid reservoir can result in
spilling brake fluid on hot engine parts, causing
the brake fluid to catch fire. Brake fluid can also
damage painted and vinyl surfaces, care should be
taken to avoid its contact with these surfaces.
(Continued)
WARNING! (Continued)
•Do not allow petroleum based fluid to contaminate
the brake fluid. Brake seal components could be
damaged, causing partial or complete brake failure.
This could result in a collision.
Automatic Transmission
Selection Of Lubricant
It is important to use the proper transmission fluid to
ensure optimum transmission performance and life. Use
only the manufacturer’s recommended transmission
fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in
“Maintaining Your Vehicle” for further fluid specifica-
tions. It is important to maintain the transmission fluid at
the correct level using the recommended fluid.
7
MAINTAINING YOUR VEHICLE 449

CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life.
4. Pull the bulb out of the socket and replace the bulb.5. If the bulb comes in contact with any oily surface,
clean the bulb with rubbing alcohol.
6. Reinsert the bulb and socket assembly and rotate
clockwise one-quarter turn to secure.
7
MAINTAINING YOUR VEHICLE 471

NOTE:It is normal to hear a loud sound when the lower
tail lamp area unsnaps from the vehicle mounting
bracket during tail lamp removal.4. Twist and remove socket from lamp.
5. Remove bulb from socket and replace.
6. Reinstall the tail lamp, fasteners, and trunk liner.
License Plate Lamp
1. Using a small screwdriver, press inward the locking
tab on the side of the lamp assembly and pull down on
the lamp assembly for removal.
2. Pull bulb from socket, replace, and reinstall the lamp
assembly into place ensuring the locking tab is secure.
474 MAINTAINING YOUR VEHICLE

About Your Brakes........................328
ABS (Anti-Lock Brake System)................331
Accessory Delay, Power......................12
Adding Engine Coolant (Antifreeze)............443
Adding Fuel.............................379
Adding Washer Fluid......................438
Additives, Fuel...........................373
Airbag..................................57
Airbag Deployment........................65
Airbag Light.............................62
Airbag Maintenance........................66
Airbag, Side..............................60
Airbag, Window (Side Curtain)................61
Air Cleaner, Engine (Engine Air Cleaner Filter). . . .432
Air Conditioner Maintenance.................434
Air Conditioning..........................285
Air Conditioning Controls...................285
Air Conditioning Filter.....................297
Air Conditioning, Operating Tips..............298Air Conditioning Refrigerant.................434
Air Conditioning System....................285
Air Pressure, Tires.........................351
Alarm System (Security Alarm)................18
Alterations/Modifications, Vehicle...............7
Antenna, Satellite Radio.....................273
Antifreeze (Engine Coolant)..................442
Disposal.............................445
Anti-Lock Brake System (ABS)................331
Anti-Lock Warning Light....................331
Anti-Theft Security Alarm (Theft Alarm)..........18
Appearance Care.........................453
Ashtray................................205
Assistance Towing.........................143
Auto Down Power Windows..................36
Automatic Dimming Mirror..................126
Automatic Door Locks......................33
Automatic Oil Change Indicator...............227
Automatic Temperature Control (ATC)..........290
498 INDEX

Headlight Switch.......................178
High Beam...........................180
High Beam Indicator....................234
High Beam/Low Beam Select..............180
Illuminated Entry.......................21
Instrument Cluster......................178
Interior..............................183
License..............................474
Lights On Reminder.....................179
Low Fuel............................221
Malfunction Indicator (Check Engine)........233
Map Reading..........................183
Oil Pressure..........................222
Passing..............................181
Seat Belt Reminder......................222
Security Alarm (Theft Alarm)...............19
Service..............................470
Theft Alarm (Security Alarm)..............229
Tire Pressure Monitoring (TPMS)............231Traction Control........................338
Turn Signal............................95
Voltage..............................221
Warning (Instrument Cluster Description).....220
Loading Vehicle..........................382
Capacities............................383
Tires ................................345
Locks..................................31
Automatic Door........................33
Auto Unlock...........................33
Door................................31
Power Door...........................32
Low Tire Pressure System...................362
Lubrication, Body.........................437
Lumbar Support..........................170
Maintenance Free Battery....................433
Maintenance Procedures....................428
Maintenance Schedule.....................
.48010
INDEX 507

Programming Transmitters (Remote Keyless Entry) . .21
Radial Ply Tires..........................353
Radiator Cap (Coolant Pressure Cap)...........444
Radio Operation..........................285
Radio Remote Controls.....................283
Rear Cupholder..........................207
Rearview Mirrors.........................125
Rear Window Defroster.....................212
Rear Window Features.....................212
Recorder, Event Data.......................68
Recreational Towing.......................395
Reformulated Gasoline.....................371
Refrigerant..............................435
Release, Hood............................175
Reminder, Seat Belt.........................55
Remote Control
Security Alarm.........................18
Starting System.........................28Remote Keyless Entry (RKE)..................21
Remote Sound System (Radio) Controls.........283
Remote Starting System......................28
Remote Trunk Release.......................38
Replacement Bulbs........................469
Replacement Keys.........................16
Replacement Parts.........................427
Replacement Tires.........................359
Reporting Safety Defects....................493
Resetting Oil Change Indicator................227
Restraint, Head...........................171
Restraints, Child...........................69
Restraints, Occupant........................40
Rotation, Tires...........................361
Safety Checks Inside Vehicle..................92
Safety Checks Outside Vehicle.................95
Safety Defects, Reporting....................493
Safety, Exhaust Gas.........................91
510 INDEX