bulb CHRYSLER 300 2010 1.G User Guide

CHRYSLER 300 2010 1.G User Guide 300 2010 1.G CHRYSLER CHRYSLER https://www.carmanualsonline.info/img/25/8417/w960_8417-0.png CHRYSLER 300 2010 1.G User Guide

Page 470 of 538

CHRYSLER 300 2010 1.G User Guide NOTE:For lighted switches, see your authorized dealer
for replacement instructions.
All of the interior bulbs are glass wedge base or glass
cartridge types. Aluminum base bulbs are not approved
and sh

Page 471 of 538

CHRYSLER 300 2010 1.G User Guide BULB REPLACEMENT
Low Beam Headlamp, High Beam Headlamp,
Park/Turn Lamp, Inner Park Lamp, and Outer
Park Lamp – 300 Models
1. Open the hood.
NOTE:Removal of the air cleaner filter housing may be
nece

Page 472 of 538

CHRYSLER 300 2010 1.G User Guide 3 — Park/Turn Lamp Bulb4 — Inner Park Lamp Bulb
5 — Outer Park Lamp Bulb
7
MAINTAINING YOUR VEHICLE 471

Page 473 of 538

CHRYSLER 300 2010 1.G User Guide CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.
Low Bea

Page 475 of 538

CHRYSLER 300 2010 1.G User Guide 7. Pull the tail lamp assembly clear from the vehicle to
access the bulbs.
8. Turn the appropriate bulb and socket assembly coun-
terclockwise to remove it from the tail lamp assembly.
1 — Backup La

Page 476 of 538

CHRYSLER 300 2010 1.G User Guide 9. Disconnect the bulb from the socket assembly and
install the replacement bulb.
10. Reinstall the bulb and socket assembly into the tail
lamp assembly, and then turn it clockwise.
11. Reinstall the

Page 478 of 538

CHRYSLER 300 2010 1.G User Guide 7. Pull the tail lamp assembly clear from the vehicle to
access the bulbs. Turn bulb sockets counterclockwise to
remove.
8. Turn the appropriate bulb and socket assembly coun-
terclockwise to remove i

Page 479 of 538

CHRYSLER 300 2010 1.G User Guide 9. Disconnect the bulb from the socket assembly and
install the replacement bulb.
10. Reinstall the bulb and socket assembly into the tail
lamp assembly, and then turn it clockwise.
3 — Turn Signal

Page 480 of 538

CHRYSLER 300 2010 1.G User Guide 11. Reinstall the tail lamp assembly, fasteners, electrical
connector, and trunk liner.
12. Close the trunk.
License Lamp
1. Remove the screws securing the lamp to the rear
fascia.
2. Remove the bulb

Page 519 of 538

CHRYSLER 300 2010 1.G User Guide Fluid Check....................... 450,483
Master Cylinder ....................... 450
Parking ............................. 335
Warning Light ........................ 222
Brakes .....................
Page:   < prev 1-10 11-20 21-30 next >